Top 25 Best Amana Tool Router Bits

 

Amana Tool 45908 Core Box 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45908 Core Box 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45908 Core Box 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 1/2-inch shank, 2 flute. Carbide tipped, industrial quality. 1/4-inch cutting height. 3/16-inch radius. Cutting diameter 3/8-inch.

 

Amana Tool 54297 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 54297 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 54297 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 1/2-inch shank, 2-flute. Carbide tipped, industrial quality. 19/32-inch cutting height. 1/4-inch shank, 2-flute. Cutting diameter 1-7/16-inch.

 

Amana Tool 56108 CNC Classical Groove 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 56108 CNC Classical Groove 2-Flute Carbide Tipped Router Bit,, 1/4-Inch Shank

Amana Tool 56108 CNC Classical Groove 2-Flute Carbide Tipped Router Bit,, 1/4-Inch Shank - 3/32-inch upper radius, 9/64-inch lower radius. 7/16-inch cutting height. 1/4-inch shank, 2 flute use in handheld, table-mounted and cnc routers. Cutting diameter 1/2-inch. Carbide tipped, industrial quality.

 

Amana Tool 45930 Elongated Core Box 2-Flute Extra Deep Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45930 Elongated Core Box 2-Flute Extra Deep Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45930 Elongated Core Box 2-Flute Extra Deep Carbide Tipped Router Bit, 1/2-Inch Shank - Carbide tipped, industrial quality. Cutting diameter 3/8-inch. 1/2-inch shank, 2 flute (extra deep). 3/16-inch radius. 1-inch cutting height.

 

Amana Tool 56116 Raised Panel Groove 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 56116 Raised Panel Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 56116 Raised Panel Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Carbide tipped, industrial quality. Cutting diameter 1-1/8-inch. 1/2-inch shank, 2 flute. 1/2-inch cutting height. 30-degree angle.

 

Amana Tool 56118 CNC Ogee Groove 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 56118 CNC Ogee Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 56118 CNC Ogee Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Carbide tipped, industrial quality. 9/64-inch radius. 1/2-inch cutting height. 1/2-inch shank, 2 flute use in handheld or cnc router. Cutting diameter 3/4-inch.

 

Amana Tool 48100 Special Amerock Hinge 2-Flute Carbide Tipped Router Bit 1-18-Inch Diameter

Amana Tool 48100 Special Amerock Hinge 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter

Amana Tool 48100 Special Amerock Hinge 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter - For the best results use in table-mounted router. Note these bits are not guaranteed due to fragility and application. . Amana 48100 specifications major diameter 1-1/8″ minor diameter 3/8″ cutting length 21/32″ shank diameter 3/8″ overall length 2″ radius 5/64″amana 48100 features this bit is designed to produce a t-slot for amerock hinges.

 

Amana Tool 45950 Core Box 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide 14-Inch Shank

Amana Tool 45950 Core Box 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/4-Inch Shank

Amana Tool 45950 Core Box 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/4-Inch Shank - With a table-mounted router, the template must be on bottom of the workpiece. With a handheld router, the template must be on top of the workpiece. Amana 45950 specifications diameter 1/2″ radius 1/4″ carbide height 3/8″ shank 1/4″ length 2″ type core boxamana 45950 features the shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the workpiece.

 

Amana Tool 45788 Lettering 60-Degree 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45788 Lettering 60-Degree 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45788 Lettering 60-Degree 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - For use in hardwood, softwood, plywood and composition material. The 60° cutting angle expels excess material quickly and eliminates chipping and splintering. Designed for routing signs.

 

Amana Tool 49643 Bead Stile and Rail 2-Flute Carbide Tipped Router Bit Set 14-Inch Shank 2-Piece

Amana Tool 49643 Bead Stile and Rail 2-Flute Carbide Tipped Router Bit Set, 1/4-Inch Shank, 2-Piece

Amana Tool 49643 Bead Stile and Rail 2-Flute Carbide Tipped Router Bit Set, 1/4-Inch Shank, 2-Piece - Includes no49640 bead stile (1-1/8 diameter by 3/8-inch cutting height by 1/4-inch radius with lower ball bearing). Carbide tipped, industrial quality bead stile and rail set. 1/4-inch shank, 2 flute. Includes no49642 bead rail (1-1/4 diameter by 5/16-inch cutting height by 1/4-inch radius with upper ball bearing).

 

Amana Tool 51558 Bullnose 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 51558 Bullnose 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 51558 Bullnose 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - , Given a full 180-degree roundover. The “nose diameter” is the thickness of stock that can be nosed, i. Amana 51558 specifications thickness 35/64″ radius 17/64″ carbide height 1″ diameter 1-1/32″ shank 1/2″ length 2-1/2″amana 51558 features shape the full edge of a workpiece with a bullnose radius bit. E. Must be used with an edge guide on handheld routers or the fence on a router table. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.

 

Amana Tool 55362 Divided Light Door by Lonnie Bird 12-Inch Shank for 78-to-1-12-Inch Material 2-Flute Carbide Tipped Router Bit Set

Amana Tool 55362 Divided Light Door by Lonnie Bird 1/2-Inch Shank for 7/8-to-1-1/2-Inch Material 2-Flute Carbide Tipped Router Bit Set

Amana Tool 55362 Divided Light Door by Lonnie Bird 1/2-Inch Shank for 7/8-to-1-1/2-Inch Material 2-Flute Carbide Tipped Router Bit Set - Cutting diameter 2-3/16-inch. 1-5/8-inch cutting height, 3/16-inch radius. Make strong, attractive divided light doors with real mortise-and-tenon joints for 7/8 to 1-1/2-inch material. Carbide tipped, industrial quality. 1/2-inch shank.

 

Amana Tool 45524 Panel Pilot 2-Flute Carbide Tipped Router Bit with Two Pilots and Hardened Boring Point 38-Inch Shank

Amana Tool 45524 Panel Pilot 2-Flute Carbide Tipped Router Bit with Two Pilots and Hardened Boring Point, 3/8-Inch Shank

Amana Tool 45524 Panel Pilot 2-Flute Carbide Tipped Router Bit with Two Pilots and Hardened Boring Point, 3/8-Inch Shank - A very useful cutter for motor body building, caravans and boat building. This enables the cutter to be guided by jigs or the inner frame from the top, middle or bottom of the cutter. Carbide tipped with 2 pilots and plunge bit with two pilots and hardened boring point for thicker material, fast cutting.

 

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No 1641 with Upper Ball Bearing 14-Inch Shank

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No. 1641 with Upper Ball Bearing, 1/4-Inch Shank

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No. 1641 with Upper Ball Bearing, 1/4-Inch Shank - 1/4-inch shank, 2-flute carbide tipped, industrial quality. Cutting diameter 615-inch, 1/2-inch cutting height. Maximum rpm = 18,000. Specifically designed to match keller number 1641, 7-degree angle. 19/32-inch upper radius, 5/32-inch lower radius.

 

Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit 14-Inch Shank

Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit, 1/4-Inch Shank

Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit, 1/4-Inch Shank - Solid carbide, industrial quality. 18-degree angle. Cutting diameter 1/4-inch, 5/8-inch cutting height. 1/4-inch shank, single flute.

 

Amana Tool 49300 Rabbet with Ball Bearing Guide 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 49300 Rabbet with Ball Bearing Guide 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 49300 Rabbet with Ball Bearing Guide 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - Amana 49300 specifications depth of rabbet 3/8″ cutting diameter 1-1/4″ cutting height 1/4″, 1/2″ shank 1/4″ flute 2amana 49300 features carbide tipped industrial quality.

 

Amana Tool 45796 Finger Joint 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45796 Finger Joint 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45796 Finger Joint 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 1-9/16-inch cutting height. 1/2-inch shank, 2 flute. 1/4-inch cutting height. Carbide tipped, industrial quality. Cutting diameter 1-3/8-inch.

 

Amana Tool 45700 V Groove 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 45700 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 45700 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - 90-degree angle. 1/4-inch shank, 2 flute carbide tipped, industrial quality. Cutting diameter 3/8-inch. 90-degree v groove bit is for decorative purposes and is not intended for ‘miter-folding’, etc. 3/4-inch cutting height.

 

Amana Tool 56100 Beading Groove 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 56100 Beading Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 56100 Beading Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - Used with a fence or edge guide, this beading bit can be used as an edge former. Quarter-round profiles are formed by this bit as it grooves, one on each side of a flat. The scale and depth of the beading profile distinguishes it from the roundover above. .

 

Amana Tool 45726 V Groove 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45726 V Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45726 V Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 7/16-inch cutting height. 90-degree angle. 1/2-inch shank, 2 flute carbide tipped, industrial quality. 90-degree v groove bit is for decorative purposes and is not intended for ‘miter-folding’, etc. Cutting diameter 1-1/4-inch.

 

Amana Tool 54135 Classical Cove and Bead 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide 12-Inch Shank

Amana Tool 54135 Classical Cove and Bead 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank

Amana Tool 54135 Classical Cove and Bead 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank - With the optional 3/8″ pilot bearing, the bit produces a fillet at the base of the bead. Use in either handheld or table-mounted router. Amana 54135 specifications diameter 2″ radius 3/8″ carbide height 1″ shank 1/2″ length 2-3/4″amana 54135 features the positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing. Largest diameter bits should be run at reduced speed.

 

Amana Tool 54299 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide 12-Inch Shank

Amana Tool 54299 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank

Amana Tool 54299 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank - Carbide tipped, industrial quality. 3/8-inch cutting height. Cutting diameter 1-53/64-inch. 3/8-inch upper radius, 5/16-inch lower radius. 1/2-inch shank, 2-flute.

 

Amana Tool 45750 V Groove 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 45750 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 45750 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - The shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the workpiece. With a handheld router, the template must be on top of the workpiece. With a table-mounted router, the template must be on bottom of the workpiece. Amana 45750 specifications type “v” groove degree 90° cutting diameter 1/2″ carbide height 1/2″ shank diameter 1/4″ overall length 2″ amana 45750 features designed for fluting and ‘v’ grooving cuts guided by a template or pattern.

 

Amana Tool 54182 Wavy Edge 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 54182 Wavy Edge 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 54182 Wavy Edge 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 11/16-inch cutting height. Cutting diameter 1-1/4-inch. 1/2-inch shank, 2-flute. Carbide tipped, industrial quality. 3/16-inch radius.

 

Amana Tool 45650 Key Hole Shank Single Flute Carbide Tipped Router Bit 14-Inch

Amana Tool 45650 Key Hole Shank Single Flute Carbide Tipped Router Bit, 1/4-Inch

Amana Tool 45650 Key Hole Shank Single Flute Carbide Tipped Router Bit, 1/4-Inch - Amana 45650 specifications large diameter 3/8″ cutting depth 3/8″ shank diameter 1/4″ overall length 1-1/2″amana 45650 features used for cutting keyhole slots in plaques, picture frames and other wall hanging items. .