Top 23 Hand Flutes for 2020

 

Chicago Latrobe 150L Left-Hand Reverse Flute High-Speed Steel Jobber Length Drill Bit Set Uncoated 118 Degree Conventional Point 15-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 15-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 15-Piece - Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals. High-speed steel (hss) provides hardness for wear resistance. 118-degree conventional point for a range of drilling applications. Made in the usa. Set of 15 jobber length drill bits includes inch sizes 1/16″ through 1/2″ in 1/32″ increments. Left-hand helix for counterclockwise drilling and broken screw removal.

 

YXQ M10 x 15mm Metric Tap Machine HSS Right Hand Thread Shank Taper and Plug 3 Straight Flute3Pcs

YXQ M10 x 1.5mm Metric Tap Machine HSS Right Hand Thread Shank Taper and Plug 3 Straight Flute(3Pcs)

YXQ M10 x 1.5mm Metric Tap Machine HSS Right Hand Thread Shank Taper and Plug 3 Straight Flute(3Pcs) - 5mm high speed steel right hand threadsuitable for in ordinary lathe, drilling and tapping machine of screw thread processing, machine use to cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut. Metric m10x1.

 

Chicago Latrobe 150L High-Speed Steel Jobber Length Drill Bit Uncoated Bright Round Shank Left Hand Flute 118 Degree Conventional Point 2164 Size Pack of 1

Chicago Latrobe 150L High-Speed Steel Jobber Length Drill Bit, Uncoated (Bright), Round Shank, Left Hand Flute, 118 Degree Conventional Point, 21/64″ Size (Pack of 1)

Chicago Latrobe 150L High-Speed Steel Jobber Length Drill Bit, Uncoated (Bright), Round Shank, Left Hand Flute, 118 Degree Conventional Point, 21/64″ Size (Pack of 1) - Left-hand helix for counterclockwise drilling and broken screw removal. 118-degree conventional point for general-purpose drilling applications. Uncoated (bright) finish has no additional surface treatment or coating. Made in the usa. High-speed steel (hss) provides hardness for wear resistance. Jobber length drill bit has a midrange drilling depth for general-purpose applications.

 

KEO 35611 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 20mm Body Diameter 131mm Overall Length

KEO 35611 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 20mm Body Diameter, 131mm Overall Length

KEO 35611 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 20mm Body Diameter, 131mm Overall Length - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 38583 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 82 Degree Point Angle 58 Body Diameter 4-38 Overall Length

KEO 38583 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 5/8″ Body Diameter, 4-3/8″ Overall Length

KEO 38583 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 5/8″ Body Diameter, 4-3/8″ Overall Length - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

KEO 33127 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 12 Body Diameter 8 Overall Length

KEO 33127 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/2″ Body Diameter, 8″ Overall Length

KEO 33127 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/2″ Body Diameter, 8″ Overall Length - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

6 Pcs 36 Cobalt Heavy Duty Jobber Length Drill Bit Drill America DAco36 Number Of Flutes 2 Cutting Direction Right Hand Flute Length 1-716 Overall Length 2-12

6 Pcs, #36 Cobalt Heavy Duty Jobber Length Drill Bit, Drill America, D/Aco36, Number Of Flutes: 2; Cutting Direction: Right Hand, Flute Length: 1-7/16″; Overall Length: 2-1/2″

6 Pcs, #36 Cobalt Heavy Duty Jobber Length Drill Bit, Drill America, D/Aco36, Number Of Flutes: 2; Cutting Direction: Right Hand, Flute Length: 1-7/16″; Overall Length: 2-1/2″ - Shank type round style jobber. Flute length 1-7/16″ overall length 2-1/2″. Size #36 material cobalt finish gold. Number of flutes 2 cutting direction right hand. Cutting angle 135 point type split point.

 

YXQ M6x1mm Tap Machine Titanium plating Metric Right Hand Thread Straight Flute Taps Taper and Plug 6Pcs

YXQ M6x1mm Tap Machine Titanium plating Metric Right Hand Thread Straight Flute Taps Taper and Plug (6Pcs)

YXQ M6x1mm Tap Machine Titanium plating Metric Right Hand Thread Straight Flute Taps Taper and Plug (6Pcs) - Total length 268 inchesshank diameter 024 inches. 3 straight threaded flutethread directionright hand. Flute diameter 6mm / 024” flute teeth pitch 1mm / 039”. Item namemetric tap,plug typematerial hss(high speed steel) titanium plating. Package include 6pcs taper and plug metric tap.

 

KEO 33144 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 14 Body Diameter 6 Overall Length

KEO 33144 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 6″ Overall Length

KEO 33144 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 6″ Overall Length - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 38143 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 82 Degree Point Angle 14 Body Diameter 2-12 Overall Length

KEO 38143 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length

KEO 38143 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 34140 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 14 Body Diameter 2-12 Overall Length

KEO 34140 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length

KEO 34140 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 18 Body Diameter 1-12 Overall Length

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

KEO 33587 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 58 Body Diameter 9 Overall Length

KEO 33587 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/8″ Body Diameter, 9″ Overall Length

KEO 33587 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/8″ Body Diameter, 9″ Overall Length - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 33382 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 38 Body Diameter 5 Overall Length

KEO 33382 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/8″ Body Diameter, 5″ Overall Length

KEO 33382 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/8″ Body Diameter, 5″ Overall Length - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems.

 

KEO 33100 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 1 Body Diameter 6 Overall Length

KEO 33100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length

KEO 33100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

KEO 35623 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 5mm Body Diameter 60mm Overall Length

KEO 35623 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5mm Body Diameter, 60mm Overall Length

KEO 35623 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5mm Body Diameter, 60mm Overall Length - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

Chicago Latrobe 150L Left-Hand Reverse Flute High-Speed Steel Jobber Length Drill Bit Set Uncoated 118 Degree Conventional Point 21-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 21-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 21-Piece - 118-degree conventional point for a range of drilling applications. Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals. Set of 21 jobber length drill bits includes inch sizes 1/16″ through 3/8″ in 1/64″ increments. High-speed steel (hss) provides hardness for wear resistance. Left-hand helix for counterclockwise drilling and broken screw removal. Made in the usa.

 

KEO 33342 High-Speed Steel NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 34 Body Diameter 8 Overall Length

KEO 33342 High-Speed Steel NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/4″ Body Diameter, 8″ Overall Length

KEO 33342 High-Speed Steel NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/4″ Body Diameter, 8″ Overall Length - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.

 

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 316 Body Diameter 2 Overall Length

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 34313 Solid Carbide NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 516 Body Diameter 2-12 Overall Length

KEO 34313 Solid Carbide NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length

KEO 34313 Solid Carbide NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

KEO 32147 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 14 Body Diameter 6 Overall Length

KEO 32147 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/4″ Body Diameter, 6″ Overall Length

KEO 32147 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/4″ Body Diameter, 6″ Overall Length - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

KEO 34312 Solid Carbide NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 516 Body Diameter 2-12 Overall Length

KEO 34312 Solid Carbide NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length

KEO 34312 Solid Carbide NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

KEO 33142 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 14 Body Diameter 4 Overall Length

KEO 33142 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 4″ Overall Length

KEO 33142 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 4″ Overall Length - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.