Top 22 W Tools

 

WetDry Vacuum wTool Start 12 gal

Wet/Dry Vacuum, w/Tool Start, 12 gal.

Wet/Dry Vacuum, w/Tool Start, 12 gal. - , Wet/dry, hose dimensions 1-1/2 in. , Power cord length 25 ft. , Dry capacity 12 gal. , 8. , Length 18 in. Wet/dry vacuum, dust extractor, tank 12 gal. , width 15 in. 5-in. , Agency compliance intertek (etl-c marked), includes hose, extension tube, floor nozzle, brush nozzle, universal nozzle, tool adapter, filter cartridge. Orifice, tank type plastic, wet capacity 12 gal. , 135 cfm @ 2. 3 amps @ 120v, 60 hz, bypass motor, average brush life 1000 hrs, static water lift 92 in. X 10 ft. , Height 30 in.

 

Nilfisk Alto Aero 26 Hepa - Contractor-Grade WetDry Hepa Vacuum WTool Start

Nilfisk Alto Aero 26 Hepa – Contractor-Grade Wet/Dry Hepa Vacuum W/Tool Start

Nilfisk Alto Aero 26 Hepa – Contractor-Grade Wet/Dry Hepa Vacuum W/Tool Start - Flat-top design and electric autostart feature (for plugging small electronic tools into the vacuum) for convenience. Nilfisk’s push & clean feature offers semi-automatic filter cartridge cleaning for maximum efficiency. Its 25-liter container capacity, 127 maximum cfm, and 84-inch maximum waterlift. Additional tools include 115-foot hose, extension tube, suction brush, and tool holder kit. German-engineered for highest-quality cleaning, reliability, and long-lasting operation.

 

Zen Toolworks Spindle Motor Grade A for Zen Toolworks CNC Machine Kit w Tool Holder

Zen Toolworks Spindle Motor (Grade A+) for Zen Toolworks CNC Machine Kit w/ Tool Holder

Zen Toolworks Spindle Motor (Grade A+) for Zen Toolworks CNC Machine Kit w/ Tool Holder - 001 inch. The brushes can be replaced, and one set of extra brush is included in the package. It also comes with the holding frames that you can easily put onto your cnc machine, hardware packet is also included. Of cause, a little premium has been added, but it has a guaranteed run out with 0. With this runout, it is suitable for pcb milling, especially surface mount circuit board making, and fine jewelry carving. This dc spindle motor equipped with precision er11 chuck can accept only 1/8 bit shank. It is picked during our qa one out of 5. All following items will be included in the package dc spindle motor with er11 chuck 1 free set of replacement brush motor holding frames (2 pairs/4 pieces) hardware packet (screws, washers and etc) international customers you are responsible for any and all additional fees, customs taxes, penalties, interests, or charges that are applied to your shipment for this order process. The speed can be adjusted from 5000 rpm (at 24v) to 8000 rpm ( at 36v). This is the spindle same as our regular ones, but with a run out less than 0. The optimum operation input voltage is between 28, 32v. The best of this motor is that it is super quiet during operation. All returns are subject to restocking fee and return shipping fees apply to any return other than defective product or seller’s error. Customers can’t refuse or return products while in customs to avoid import duties or above mentioned fees. 0015 inch.

 

58 W TOOL DROP-IN ANCHOR ZINC CR3 W TOOL  QUANTITY 25

5/8″ W/ TOOL DROP-IN ANCHOR ZINC CR+3 W/ TOOL | (QUANTITY: 25)

5/8″ W/ TOOL DROP-IN ANCHOR ZINC CR+3 W/ TOOL | (QUANTITY: 25) - Here is a 3-pc fly cutter set that-inch hard to beat each is supplied with black oxide finish a setscrew flat and a blank high speed steel tool. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.

 

Stens 051-036 Pneumatic Chair Fits Model Pro-Lift Stool W Tool Tray

Stens 051-036 Pneumatic Chair Fits Model Pro-Lift Stool W/ Tool Tray

Stens 051-036 Pneumatic Chair Fits Model Pro-Lift Stool W/ Tool Tray - Upc 042928170724. Pneumatic chair / pro-lift stool w/ tool tray.

 

CLC Custom Leather Craft - PK6105 - Hard Shell 2-Strap Removable Cap Knee Pads wTool Holder Blue Knee PadsBlack Tool Holder

CLC (Custom Leather Craft) – PK6105 – Hard Shell 2-Strap Removable Cap Knee Pads w/Tool Holder, Blue (Knee Pads)/Black (Tool Holder)

CLC (Custom Leather Craft) – PK6105 – Hard Shell 2-Strap Removable Cap Knee Pads w/Tool Holder, Blue (Knee Pads)/Black (Tool Holder) - Removable cap knee pads w/tool holder, style hard shell, cap material rubber, pad material closed cell foam gel, size one size fits all, closure type button and loop, color blue (knee pads)/black (tool holder), number of straps 2, strap material synthetic rubber.

 

VAC RAVEN SUPER 1340 BACKPACK VACUUM WTOOLS

VAC, RAVEN SUPER 1340 BACKPACK VACUUM W/TOOLS

VAC, RAVEN SUPER 1340 BACKPACK VACUUM W/TOOLS - Vac, raven super 1340 backpack vacuum w/tools 14″ scalloped rug tool 17″ crevice tool 2-pc aluminum wand 3″ dust brush 5″ upholstery tool 5′ x 1 1/2″ hose 10 quart capacity 1340 watts, single stage super raven 23″ height airflow 150 cfm’s amps 11. 5 db 67 static lift 100″ tool kit included with the following volts 115v.

 

Cherokee Womens Harmony Step-In Padded Collar Shoe Black Wide 8 W US Size 8 CD US Color Black Wide Model HARMONY-W Tools Hardware store

Cherokee Women’s Harmony Step-In Padded Collar Shoe, Black Wide, 8 W US Size: 8 C/D US Color: Black Wide, Model: HARMONY-W, Tools & Hardware store

Cherokee Women’s Harmony Step-In Padded Collar Shoe, Black Wide, 8 W US Size: 8 C/D US Color: Black Wide, Model: HARMONY-W, Tools & Hardware store - Cherokee workwear padded collar slip on with durable leather upper and moisture absorbing lining materials. Contemporary molded outsole with medium height heel.

 

Ridgid K-750 Drum Machine WTool Set Autofeed Gloves 58 Std Equip 100L X 58W Cables

Ridgid K-750 Drum Machine W/Tool Set, Autofeed & Gloves, 5/8″ Std Equip, 100’L X 5/8″W Cables

Ridgid K-750 Drum Machine W/Tool Set, Autofeed & Gloves, 5/8″ Std Equip, 100’L X 5/8″W Cables - Includes, canvas pouch. Pads have double straps and feature injected-gel removable caps and a tool holder. Type, arch punch set. Cutter diam, 3/16 in, 5/16 in, 7/16 in, 9/16 in, 11/16 in, 13/16 in, 15/16 in. Tip type, round.

 

Arch Punch Sets - 7pc arch punch set wtool roll 316 516 7

Arch Punch Sets – 7pc. arch punch set w/tool roll 3/16 5/16 7

Arch Punch Sets – 7pc. arch punch set w/tool roll 3/16 5/16 7 - Dimensions overall product weight -4 pounds. Generic dimensions -cutter diam 3/16 in, 5/16 in, 7/16 in, 9/16 in, 11/16 in, 13/16 in, 15/16 in. . -Material carbon steel. -Wt. 4 lb. -Type arch punch set. Product type -punches. 565-k-16 features -tip type round.

 

12 W TOOL DROP-IN ANCHOR ZINC CR3 W TOOL  QUANTITY 50

1/2″ W/ TOOL DROP-IN ANCHOR ZINC CR+3 W/ TOOL | (QUANTITY: 50)

1/2″ W/ TOOL DROP-IN ANCHOR ZINC CR+3 W/ TOOL | (QUANTITY: 50) - Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Here is a 3-pc fly cutter set that-inch hard to beat each is supplied with black oxide finish a setscrew flat and a blank high speed steel tool.

 

516-18 W TOOL MACHINE SCREW ANCHOR ZINC ALLOY CONE LEAD SLEEVE WTOOL  QUANTITY 100

5/16″-18 W/ TOOL MACHINE SCREW ANCHOR ZINC ALLOY CONE LEAD SLEEVE W/TOOL | (QUANTITY: 100)

5/16″-18 W/ TOOL MACHINE SCREW ANCHOR ZINC ALLOY CONE LEAD SLEEVE W/TOOL | (QUANTITY: 100) - Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.

 

Dt7102 - 170 Pc Tool Kit W Tool Box

Dt7102 – 170 Pc Tool Kit W Tool Box

Dt7102 – 170 Pc Tool Kit W Tool Box - Tools are heat treated and chrome plated to resist corrosion. 5mm) tape measure, voltage tester five combination wrenches 3/8″, 7/16″, 1/2″, 9/16″, 5/8″ sixteen metric & sae hex keys six precision screwdrivers, 6″ (150mm) mini hacksaw five extra saw blades four screwdrivers slotted 3/16″, 1/4″ phillips #1, #2 ten 1″ bits 1/8″, 5/32″, 3/16″, 1/4″, ph1, ph2, ph3, pz1, pz2, pz3 ten 1″ bits t10, t15, t20, t25, t27, t30, 1/8″, 5/32″, 3/16″, 1/4″ one hundred screws & anchors assortment. Be prepared for every job around the house with this 170 piece tool kit. Apollo tools dt7102 170-piece household tool kit with tool box. The handy tool box conveniently stores tools for quick access. . Contains 1/4″ bit driver, 2″ bit connector, 6″ long nose pliers, 6″ diagonal pliers, 6″ adjustable wrench, 8″ (200mm) crimping pliers, 8″ (200mm) scissors, 8″ (200mm) plastic level, 8 oz rubber mallet, 8 oz claw hammer, 18mm plastic knife, 12ft (3.

 

Stop Leak Power Steering Steer-X K&W Tools Equipment Hand Tools

Stop Leak, Power Steering, Steer-X, K&W Tools Equipment Hand Tools

Stop Leak, Power Steering, Steer-X, K&W Tools Equipment Hand Tools - This is a special order item. This product meets the oversized requirement per ups/fedex. This product also meets the large package requirement per ups/fedex. . Combatable with all late model power steering and rack & pinion systems, including honda, acura, & subaru. The shipping weight reflected is the dimensional weight. 2-4 weeks to be shipped. The estimated shipping cost will include this fee. Orders can take approx. Quickly stops leaks in all domestic and imported power steering systems. Conditions hardened seal and prevents against future leaks.

 

10-24 W TOOL MACHINE SCREW ANCHOR ZINC ALLOY CONE LEAD SLEEVE WTOOL  QUANTITY 100

#10-24 W/ TOOL MACHINE SCREW ANCHOR ZINC ALLOY CONE LEAD SLEEVE W/TOOL | (QUANTITY: 100)

#10-24 W/ TOOL MACHINE SCREW ANCHOR ZINC ALLOY CONE LEAD SLEEVE W/TOOL | (QUANTITY: 100) - Jet fitting & supply corporation has been selling machine screw anchor, zinc alloy cone lead sleeve (inch) since 1946. Trust in jet to deliver you high quality fasteners.

 

X10 PRO Soft Start Dimmable Wall Switch White PLW01-W Model PLW01-W Tools Hardware store

X10 PRO Soft Start Dimmable Wall Switch, White (PLW01-W), Model: PLW01-W, Tools & Hardware store

X10 PRO Soft Start Dimmable Wall Switch, White (PLW01-W), Model: PLW01-W, Tools & Hardware store - 500 watts. Simply connect two wires and you’re all set. You’ll be able to control lights directly from the switch (press once for on, press again for off) as well as remotely from any x10 compatible transmitter. Expanding your x10 system to include wired- in lights is a snap with these easy-to-use x10 wall switches. Can only be used with incandescent lights. All x10 compatible 2-wire dimmer switches and modules rely on the conduction path through the incandescent bulb filament and will not work properly with other loads. Trim plate not included. The switch will respond to the all lights on/all units off command, and you can dim the light from any x10 transmitter with dim/bright control.

 

8-in-1 Soldering Iron Kit Kuman 60W with ONOFF Switch Adjustable Temperature Different Tips Tin Wire Tube Desoldering Pump Stand Anti-static Tweezers and Solder Tip Cleaning Wire w a Tool Case

8-in-1 Soldering Iron Kit Kuman 60W with ON/OFF Switch Adjustable Temperature, Different Tips, Tin Wire Tube, Desoldering Pump, Stand, Anti-static Tweezers and Solder Tip Cleaning Wire w/ a Tool Case

8-in-1 Soldering Iron Kit Kuman 60W with ON/OFF Switch Adjustable Temperature, Different Tips, Tin Wire Tube, Desoldering Pump, Stand, Anti-static Tweezers and Solder Tip Cleaning Wire w/ a Tool Case - Newest 60w adjustable temperature welding soldering iron, 5pcs different soldering tips, solder wire, desoldering pump, stand, anti-static tweezers and solder tip cleaning wire with a tool case. Heat quickly, can reduce the temperature of the handle, and avoid hot plastic melting. A tool case can store all tools together, easy and convenient to arrange your workspace. Exclusive patent with a switch on/off on the soldering iron, no need to unplug the outlet, just need to turn it off by switch if you don’t want to use it not only save energy but also keep your welding safe. Easy, convenient, fast, powerful, larger weld weldable material.

 

National Nail 0345107 Screws Deck Kit WTool 1-78In

National Nail 0345107 Screws Deck Kit W/Tool 1-7/8In

National Nail 0345107 Screws Deck Kit W/Tool 1-7/8In - Weight 7400 lbs. Upc 042928170724.

 

SOG B31N New Black Oxide Coated 43 Paratool Multi-Tool W Tools  Hand Tools

SOG B31N New Black Oxide Coated 4.3 Paratool Multi-Tool W/ Tools , Hand Tools

SOG B31N New Black Oxide Coated 4.3 Paratool Multi-Tool W/ Tools , Hand Tools - 4 • closed dim 4. 2oz • lifetime warranty • black oxide. • Exclusive multi-angled plier head allows for use in tight spaces • stainless steel handles & plier head with nonreflective black-oxide coating • knife/blades • phillips(r) & slotted screwdrivers • can & bottle opener • awl • nylon carrying pouch • retail boxed • open dim 6. 3 • weight 6.

 

Grizzly H5935 Fly Cutter Set with Tool Bits 12-Inch

Grizzly H5935 Fly Cutter Set with Tool Bits, 1/2-Inch

Grizzly H5935 Fly Cutter Set with Tool Bits, 1/2-Inch - 3/16-inch 1/4-inch and 5/16-inch bit sizes. 1/2-inch shanks. 3/4-inch 1-1/8-inch and 1-3/8-inch head sizes. Here is a 3-pc fly cutter set that-inch hard to beat each is supplied with black oxide finish a setscrew flat and a blank high speed steel tool.

 

Oshion 125FT Step Platform Multi Purpose Aluminum Folding Scaffold Ladder W Tool Tray

Oshion 12.5FT Step Platform Multi Purpose Aluminum Folding Scaffold Ladder W/ Tool Tray

Oshion 12.5FT Step Platform Multi Purpose Aluminum Folding Scaffold Ladder W/ Tool Tray - Easy to assemble and store, space-saving design with a folded dimension approx36″ x 14″. Max load approx 330 lbs two panels that can be used as a working platform. Anodized aluminium alloy construction for anti-corrosive protection. 125ft foldable telescopic style climb ladder with tool tray. Foldable design, convenient to use and easy to carry around.

 

Pico 0003-OG1 160 Piece General Motors Weatherpack Electrical Terminal Kit wTools

Pico 0003-OG1 160 Piece General Motors Weatherpack Electrical Terminal Kit w/Tools

Pico 0003-OG1 160 Piece General Motors Weatherpack Electrical Terminal Kit w/Tools - . Gm weatherpack kit includes 5850, 5851, 5852, 5853, 5854, 5855, 5856, 5860, 5861, 5862, 5863, 5864, 5865, 5867, 5868, 0660, 0663.