Top 22 Best Walton Tap Extractors in 2020

 

Walton 30374 38 4 Flute STI Tap Extractor With Square Shank #ad

Walton 30374 3/8″, 4 Flute STI Tap Extractor With Square Shank

Walton 30374 3/8″, 4 Flute STI Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For helical coil wire screw thread insert taps.

 

Walton 10253 14 3 Flute Tap Extractor With Square Shank #ad

Walton 10253 1/4″, 3 Flute Tap Extractor With Square Shank

Walton 10253 1/4″, 3 Flute Tap Extractor With Square Shank #ad - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 18015-3 15 Piece 3 Flute Tap Extractor Set With Square Shank #ad

Walton 18015-3 15 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18015-3 15 Piece 3 Flute Tap Extractor Set With Square Shank #ad - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Packed in 15-compartment plastic case. For removing machine screws and broken hand taps. 15 piece set contains sizes #4, #5, #6, #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″, 1″.

 

Walton 30434 716 4 Flute STI Tap Extractor With Square Shank #ad

Walton 30434 7/16″, 4 Flute STI Tap Extractor With Square Shank

Walton 30434 7/16″, 4 Flute STI Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For helical coil wire screw thread insert taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10754 34 4 Flute Tap Extractor With Square Shank #ad

Walton 10754 3/4″, 4 Flute Tap Extractor With Square Shank

Walton 10754 3/4″, 4 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 10042 4 2 Flute Tap Extractor With Square Shank #ad

Walton 10042 #4, 2 Flute Tap Extractor With Square Shank

Walton 10042 #4, 2 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10053 5 3 Flute Tap Extractor With Square Shank #ad

Walton 10053 #5, 3 Flute Tap Extractor With Square Shank

Walton 10053 #5, 3 Flute Tap Extractor With Square Shank #ad - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 10623 58 3 Flute Tap Extractor With Square Shank #ad

Walton 10623 5/8″, 3 Flute Tap Extractor With Square Shank

Walton 10623 5/8″, 3 Flute Tap Extractor With Square Shank #ad - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton Replacement Finger for 4 Flute Tap Extractor 12 Size #ad

Walton Replacement Finger for 4 Flute Tap Extractor, 1/2″ Size

Walton Replacement Finger for 4 Flute Tap Extractor, 1/2″ Size #ad - Replacement finger for walton 4 flute, tap extractors. For removing machine screws and broken hand taps. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Made of hardened steel to help prevent the damage of the workpieces threads.

 

Walton 10084 8 4 Flute Tap Extractor With Square Shank #ad

Walton 10084 #8, 4 Flute Tap Extractor With Square Shank

Walton 10084 #8, 4 Flute Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton Replacement Finger for 4 Flute Tap Extractor 716 Size #ad

Walton Replacement Finger for 4 Flute Tap Extractor, 7/16″ Size

Walton Replacement Finger for 4 Flute Tap Extractor, 7/16″ Size #ad - For removing machine screws and broken hand taps. Replacement finger for walton 4 flute, tap extractors. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Made of hardened steel to help prevent the damage of the workpieces threads.

 

Walton 10254 14 4 Flute Tap Extractor With Square Shank #ad

Walton 10254 1/4″, 4 Flute Tap Extractor With Square Shank

Walton 10254 1/4″, 4 Flute Tap Extractor With Square Shank #ad - When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10064 6 4 Flute Tap Extractor With Square Shank #ad

Walton 10064 #6, 4 Flute Tap Extractor With Square Shank

Walton 10064 #6, 4 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10564 916 4 Flute Tap Extractor With Square Shank #ad

Walton 10564 9/16″, 4 Flute Tap Extractor With Square Shank

Walton 10564 9/16″, 4 Flute Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10083 8 3 Flute Tap Extractor With Square Shank #ad

Walton 10083 #8, 3 Flute Tap Extractor With Square Shank

Walton 10083 #8, 3 Flute Tap Extractor With Square Shank #ad - When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10062 6 2 Flute Tap Extractor With Square Shank #ad

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank #ad - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps.

 

Walton 10874 78 4 Flute Tap Extractor With Square Shank #ad

Walton 10874 7/8″, 4 Flute Tap Extractor With Square Shank

Walton 10874 7/8″, 4 Flute Tap Extractor With Square Shank #ad - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 10104 10 4 Flute Tap Extractor With Square Shank #ad

Walton 10104 #10, 4 Flute Tap Extractor With Square Shank

Walton 10104 #10, 4 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton Replacement Finger for 2 Flute Tap Extractor 5 Size #ad

Walton Replacement Finger for 2 Flute Tap Extractor, #5 Size

Walton Replacement Finger for 2 Flute Tap Extractor, #5 Size #ad - For removing machine screws and broken hand taps. Made of hardened steel to help prevent the damage of the workpieces threads. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Replacement finger for walton 2 flute, tap extractors.

 

Walton 20504 12 4 Flute Pipe NPT Tap Extractor With Square Shank #ad

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank #ad - All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. When fingers become bent or broken or are too short for further use, replacement fingers are available. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For pipe taps.

 

Walton 10103 10 3 Flute Tap Extractor With Square Shank #ad

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10252 14 2 Flute Tap Extractor With Square Shank #ad

Walton 10252 1/4″, 2 Flute Tap Extractor With Square Shank

Walton 10252 1/4″, 2 Flute Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.