Top 20 Best Worm Gear Hose Clamps

 

American Valve 10-Pack Worm Gear Hose Clamp 716 to 2932 SAE size 8 CL8PK10 Stainless Steel Band Housing

American Valve 10-Pack Worm Gear Hose Clamp, 7/16″ to 29/32″ (SAE size 8), CL8PK10, Stainless Steel Band & Housing

American Valve 10-Pack Worm Gear Hose Clamp, 7/16″ to 29/32″ (SAE size 8), CL8PK10, Stainless Steel Band & Housing - The recommended installation screw torque is 30-40 lbs/in (34, 45 nm). Adjusts from 7/16-in up to 29/32-in. Simple screw tightening method creates a strong clamp force that will not shake loose. Good for many applications such as bundling or sealing air and fluid hose lines. The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads.

 

Uxcell Stainless Steel Hoop Ring Worm Gear Hose Clamp 21mm to 44mm Silver Tone

Uxcell Stainless Steel Hoop Ring Worm Gear Hose Clamp, 21mm to 44mm, Silver Tone

Uxcell Stainless Steel Hoop Ring Worm Gear Hose Clamp, 21mm to 44mm, Silver Tone - Release or tighten the bolt to adjust the band diameter range. Prevent hose extrusion through the worn gear slots of soft hoses with silver tone hose clamp. The band part is made of stainless material which is much stronger for long time fastening use. Ideal for industrial or home use.

 

Tanz HM-02 Caesar Hardware Miniature Worm Gear Hose Clamp

Tanz HM-02 Caesar Hardware Miniature Worm Gear Hose Clamp

Tanz HM-02 Caesar Hardware Miniature Worm Gear Hose Clamp - They are used to connect flexible hose to dust hoods, blast gates and fittings. This is commonly used in small diameter applications such as air & fuel lines, installation in tight fitting or difficult to reach areas. Hose clamps attach hoses to fittings to prevent flow leakage. Tanz’s hose clamps have fine finish. They are suitable for a large number of uses and commonly used in industrial, electronic and automotive applications. The stainless steel material is ideal to be used in outdoor, fresh water and mildly corrosive applications. The clamp’s band is made from stainless steel 304 material.

 

American Valve 6-Pack Worm Gear Hose Clamp 6-116 to 7 SAE size 104 CL104PK6 Stainless Steel Band Housing

American Valve 6-Pack Worm Gear Hose Clamp, 6-1/16″ to 7″ (SAE size 104), CL104PK6, Stainless Steel Band & Housing

American Valve 6-Pack Worm Gear Hose Clamp, 6-1/16″ to 7″ (SAE size 104), CL104PK6, Stainless Steel Band & Housing - The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads. The recommended installation screw torque is 30-40 lbs/in (34, 45 nm). Simple screw tightening method creates a strong clamp force that will not shake loose. Adjusts from 6-1/16-in up to 7-in. Good for many applications such as bundling or sealing air and fluid hose lines.

 

uxcell 52-76mm Metal Adjustable Cable Tight Worm Gear Hose Clamp Silver Tone 2pcs

uxcell 52-76mm Metal Adjustable Cable Tight Worm Gear Hose Clamp Silver Tone 2pcs

uxcell 52-76mm Metal Adjustable Cable Tight Worm Gear Hose Clamp Silver Tone 2pcs - Release or tighten the bolt to adjust the band diameter range.  Connection fasteners for water, oil, gas, hydraulic hose. Prevent hose extrusion through the worm gear slots of soft hoses with these hose clamp. Ideal for industrial or home use. .

 

Generic 304 Stainless Steel Standard Type Band Worm Gear Hose Clamp 625 - 1225Pack Of 20

Generic 304 Stainless Steel Standard Type Band Worm Gear Hose Clamp 6/25″ – 12/25″(Pack Of 20)

Generic 304 Stainless Steel Standard Type Band Worm Gear Hose Clamp 6/25″ – 12/25″(Pack Of 20) - Clamp diameter =6/25 in [min], 12/25 in [max] width = 8/25 in bolt/screw type = hex head bolt/screw material = stainless steel 304 material = stainless steel 304 handle locking type = worm drive buckle-grooved band applications = hose, tubing, fuel lines, air lines head type = band & buckle.

 

uxcell 9-16mm Metal Adjustable Cable Tight Worm Gear Hose Clamp Silver Tone 10pcs

uxcell 9-16mm Metal Adjustable Cable Tight Worm Gear Hose Clamp Silver Tone 10pcs

uxcell 9-16mm Metal Adjustable Cable Tight Worm Gear Hose Clamp Silver Tone 10pcs - Â Connection fasteners for water, oil, gas, hydraulic hose. Prevent hose extrusion through the worm gear slots of soft hoses with these hose clamp. Ideal for industrial or home use. Release or tighten the bolt to adjust the band diameter range.

 

Uxcell Adjustable Bolt Worm Gear Hose Clamp Hoop Coupler 3 Piece 32-51mm

Uxcell Adjustable Bolt Worm Gear Hose Clamp Hoop Coupler (3 Piece), 32-51mm

Uxcell Adjustable Bolt Worm Gear Hose Clamp Hoop Coupler (3 Piece), 32-51mm - Product name hose clamptype adjustable. Package 3 x hose clamp. Range 32mm, 51mm / 13″, 2″band width 13mm / 051″. Overall diameter 51cm / 2″main material stainless steel. Color silver toneweight 56g.

 

American Valve 10-Pack Worm Gear Hose Clamp 1116 to 1-14 SAE size 12 CL12PK10 Stainless Steel Band Housing

American Valve 10-Pack Worm Gear Hose Clamp, 11/16″ to 1-1/4″ (SAE size 12), CL12PK10, Stainless Steel Band & Housing

American Valve 10-Pack Worm Gear Hose Clamp, 11/16″ to 1-1/4″ (SAE size 12), CL12PK10, Stainless Steel Band & Housing - The recommended installation screw torque is 30-40 lbs/in (34, 45 nm). Simple screw tightening method creates a strong clamp force that will not shake loose. Good for many applications such as bundling or sealing air and fluid hose lines. The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads. Adjusts from 11/16-in up to 1-1/4-in.

 

uxcell 188-230mm74-91in Adjustable Worm Gear Hose Clamp Hoop Silver Tone

uxcell 188-230mm/7.4-9.1in Adjustable Worm Gear Hose Clamp Hoop Silver Tone

uxcell 188-230mm/7.4-9.1in Adjustable Worm Gear Hose Clamp Hoop Silver Tone - Prevent hose extrusion through the worn gear slots of soft hoses with silver tone hose clamp. 4. 1. Ideal for industrial or home use. 3. The band part is made of stainless material which is much stronger for long time fastening use. 2. Release or tighten the bolt to adjust the band diameter range.

 

uxcell Adjustable 6-12mm Range Worm Gear Hose Clamps 20PCS Silver Tone

uxcell Adjustable 6-12mm Range Worm Gear Hose Clamps 20PCS Silver Tone

uxcell Adjustable 6-12mm Range Worm Gear Hose Clamps 20PCS Silver Tone - Ideally for industrial or home use. Prevent hose extrusion through the worm gear slots of soft hoses with these metal hose clamp. Release or tighten the bolt to adjust the band diameter range. .

 

American Valve 10-Pack Worm Gear Hose Clamp 34 to 1-12 SAE size 16 CL16PK10 Stainless Steel Band Housing

American Valve 10-Pack Worm Gear Hose Clamp, 3/4″ to 1-1/2″ (SAE size 16), CL16PK10, Stainless Steel Band & Housing

American Valve 10-Pack Worm Gear Hose Clamp, 3/4″ to 1-1/2″ (SAE size 16), CL16PK10, Stainless Steel Band & Housing - Adjusts from 3/4-in up to 1-1/2-in. Simple screw tightening method creates a strong clamp force that will not shake loose. The recommended installation screw torque is 30-40 lbs/in (34, 45 nm). The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads. Good for many applications such as bundling or sealing air and fluid hose lines.

 

American Valve 10-Pack Worm Gear Hose Clamp 1316 to 1-34 SAE size 20 CL20PK10 Stainless Steel Band Housing

American Valve 10-Pack Worm Gear Hose Clamp, 13/16″ to 1-3/4″ (SAE size 20), CL20PK10, Stainless Steel Band & Housing

American Valve 10-Pack Worm Gear Hose Clamp, 13/16″ to 1-3/4″ (SAE size 20), CL20PK10, Stainless Steel Band & Housing - The recommended installation screw torque is 30-40 lbs/in (34, 45 nm). The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads. Adjusts from 13/16-in up to 1-3/4-in. Simple screw tightening method creates a strong clamp force that will not shake loose. Good for many applications such as bundling or sealing air and fluid hose lines.

 

HPS SSWC-52-76x10 HPS Stainless Steel Worm Gear Liner Hose Clamps SAE 40 Effective Size 2-116- 3 12 Band Pack of 10

HPS SSWC-52-76×10 HPS Stainless Steel Worm Gear Liner Hose Clamps SAE 40, Effective Size 2-1/16″- 3″, 1/2″ Band (Pack of 10)

HPS SSWC-52-76×10 HPS Stainless Steel Worm Gear Liner Hose Clamps SAE 40, Effective Size 2-1/16″- 3″, 1/2″ Band (Pack of 10) - 1/2″ band, 5/16″ (8mm) slotted hex screw. Effective diameter range 2-1/16″, 3″ (52mm-76mm). Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose. Maximum torque spec 35 in lbs, exceeds all sae requirements. 100% stainless steel sold in quantity of 10.

 

Uxcell Adjustable Stainless Steel Worm Gear Hose Clamp 3 Piece 52mm to 76mm

Uxcell Adjustable Stainless Steel Worm Gear Hose Clamp (3 Piece), 52mm to 76mm

Uxcell Adjustable Stainless Steel Worm Gear Hose Clamp (3 Piece), 52mm to 76mm - Release or tighten the bolt to adjust the band diameter range. The band part is made of stainless material which is much stronger for long time fastening use. Prevent hose extrusion through the worm gear slots of soft hoses with these stainless steel hose clamp. Ideal for industrial or home use. .

 

TOOGOOR 2 Pcs 91-114mm Adjustable Range Stainless Steel Band Worm Gear Hose Clamp 45

TOOGOO(R) 2 Pcs 91-114mm Adjustable Range Stainless Steel Band Worm Gear Hose Clamp 4.5″

TOOGOO(R) 2 Pcs 91-114mm Adjustable Range Stainless Steel Band Worm Gear Hose Clamp 4.5″ - Release or tighten the bolt to adjust the band diameter rangeideal for industrial or home use. Toogoo is a registered trademark. 5″. Only authorized seller of toogoo can sell under toogoo listings. The band part is made of stainless material which is much stronger for long time fastening use. Prevent hose extrusion through the worm gear slots of soft hoses with these stainless steel hose clamp. Toogoo(r) 2 pcs 91-114mm adjustable range stainless steel band worm gear hose clamp 4.

 

American Valve 6-Pack Worm Gear Hose Clamp 4-116 to 5 SAE size 72 CL72PK6 Stainless Steel Band Housing

American Valve 6-Pack Worm Gear Hose Clamp, 4-1/16″ to 5″ (SAE size 72), CL72PK6, Stainless Steel Band & Housing

American Valve 6-Pack Worm Gear Hose Clamp, 4-1/16″ to 5″ (SAE size 72), CL72PK6, Stainless Steel Band & Housing - Simple screw tightening method creates a strong clamp force that will not shake loose. Good for many applications such as bundling or sealing air and fluid hose lines. The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads. Adjusts from 4-1/16-in up to 5-in. The recommended installation screw torque is 30-40 lbs/in (34, 45 nm).

 

American Valve 2-Pack Worm Gear Hose Clamp 1-516 to 2-14 SAE size 28 CL28PK2 Stainless Steel Band Housing

American Valve 2-Pack Worm Gear Hose Clamp, 1-5/16″ to 2-1/4″ (SAE size 28), CL28PK2, Stainless Steel Band & Housing

American Valve 2-Pack Worm Gear Hose Clamp, 1-5/16″ to 2-1/4″ (SAE size 28), CL28PK2, Stainless Steel Band & Housing - Simple screw tightening method creates a strong clamp force that will not shake loose. Adjusts from 1-5/16-in up to 2-1/4-in. Good for many applications such as bundling or sealing air and fluid hose lines. The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads. The recommended installation screw torque is 30-40 lbs/in (34, 45 nm).

 

American Valve 2-Pack Worm Gear Hose Clamp 1116 to 1-14 SAE size 12 CL12PK2 Stainless Steel Band Housing

American Valve 2-Pack Worm Gear Hose Clamp, 11/16″ to 1-1/4″ (SAE size 12), CL12PK2, Stainless Steel Band & Housing

American Valve 2-Pack Worm Gear Hose Clamp, 11/16″ to 1-1/4″ (SAE size 12), CL12PK2, Stainless Steel Band & Housing - Good for many applications such as bundling or sealing air and fluid hose lines. Adjusts from 1-1/16-in up to 1-1/4-in. Simple screw tightening method creates a strong clamp force that will not shake loose. The recommended installation screw torque is 30-40 lbs/in (34, 45 nm). The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16″ hex heads.

 

HPS SSWC-46-70x6 HPS Stainless Steel Worm Gear Liner Hose Clamps SAE 36 Effective Size 1-1316- 2-34 12 Band Pack of 6

HPS SSWC-46-70×6 HPS Stainless Steel Worm Gear Liner Hose Clamps SAE 36, Effective Size 1-13/16″- 2-3/4″, 1/2″ Band (Pack of 6)

HPS SSWC-46-70×6 HPS Stainless Steel Worm Gear Liner Hose Clamps SAE 36, Effective Size 1-13/16″- 2-3/4″, 1/2″ Band (Pack of 6) - Effective diameter range 1-13/16″, 2-3/4″ (46mm-70mm). Four piece heavy duty industrial grade quad-lock design, inner protective liner prevents the damage of the hose. Maximum torque spec 35 in lbs, exceeds all sae requirements. 100% stainless steel sold in quantity of 10. 1/2″ band, 5/16″ (8mm) slotted hex screw.