Top 17 Carbide Tipped Bits

 

Makita 5 Piece - SDS-Plus Bit Set For Rotary Hammers - Aggressive Drilling For Concrete Masonry - Carbide Tipped Bits

Makita® 5 Piece – SDS-Plus Bit Set For Rotary Hammers – Aggressive Drilling For Concrete & Masonry – Carbide Tipped Bits

Makita® 5 Piece – SDS-Plus Bit Set For Rotary Hammers – Aggressive Drilling For Concrete & Masonry – Carbide Tipped Bits - Engineered in anjo aichi, japan for makita sds-plus rotary hammers and also fully compatible with all (bosch, dewalt, milwaukee, hilti, etc) sds-plus rotary hammers. Common diameters included 1 bit of 3/16″ + 1 bit of 1/4″ + 1 bit of 5/16″ + 1 bit of 3/8″ + 1 bit of 1/2″. Ideal for general contractors, diy, or homeowners who need a wide variety of concrete drill bit sizes, all conveniently placed in their own sturdy plastic carrying case for easy access and storage. Makita’s sds-plus drilling bit set for rotary hammers with case offers convenience and peace of mind, equipped with the most commonly used sizes for drilling, screwing, anchoring and fastening into all types of concrete and masonry. Makita’s top quality carbide tips ensure drilling performance and longevity of bit life even in the most demanding of applications of concrete, brick, masonry, and reinforced concrete the makita sds-plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.

 

Magnate 427 Dovetail 2 Flute Carbide Tipped Router Bit - 7 Degree 1732 Cutting Diameter

Magnate 427 Dovetail 2 Flute Carbide Tipped Router Bit – 7 Degree; 17/32″ Cutting Diameter

Magnate 427 Dovetail 2 Flute Carbide Tipped Router Bit – 7 Degree; 17/32″ Cutting Diameter - Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. 14 degree dovetail may be used in conjunction with 14 degree butterfly spline bits to make butterfly spline glue joint. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. You may try the following suggestion. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It can also be used with legacy ornamental mill machines to create unique indexed dovetail slots at 90 degree or 120 degree spacing for furniture legs and three legged pedestals. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. This bit is designed for making drawer fingers and for french dovetailing. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits.

 

Magnate 1514 Extra Deep Core Box Carbide Tipped Router Bit - 1-12 Cutting Diameter

Magnate 1514 Extra Deep Core Box Carbide Tipped Router Bit – 1-1/2″ Cutting Diameter

Magnate 1514 Extra Deep Core Box Carbide Tipped Router Bit – 1-1/2″ Cutting Diameter - In case a bit doesn’t come with a speed chart. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips.

 

MLCS 8383 66 Piece Carbide-Tipped Router Bit Set 12-Inch Shank

MLCS 8383 66 Piece Carbide-Tipped Router Bit Set, 1/2-Inch Shank

MLCS 8383 66 Piece Carbide-Tipped Router Bit Set, 1/2-Inch Shank - Storage box is wall-mountable. Quality, carbide-tipped bits. Includes storage box. Incredible value. Assortment set makes a great gift for any woodworker on your list.

 

Magnate 432 Dovetail 2 Flute Carbide Tipped Router Bit - 14 Degree 12 Cutting Diameter

Magnate 432 Dovetail 2 Flute Carbide Tipped Router Bit – 14 Degree; 1/2″ Cutting Diameter

Magnate 432 Dovetail 2 Flute Carbide Tipped Router Bit – 14 Degree; 1/2″ Cutting Diameter - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It can also be used with legacy ornamental mill machines to create unique indexed dovetail slots at 90 degree or 120 degree spacing for furniture legs and three legged pedestals. 14 degree dovetail may be used in conjunction with 14 degree butterfly spline bits to make butterfly spline glue joint. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This bit is designed for making drawer fingers and for french dovetailing. In case a bit doesn’t come with a speed chart. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials.

 

Magnate 7558 Barley Twist Carbide Tipped Router Bit - 34 Cutting Diameter 2 Shank Length

Magnate 7558 Barley Twist Carbide Tipped Router Bit – 3/4″ Cutting Diameter; 2″ Shank Length

Magnate 7558 Barley Twist Carbide Tipped Router Bit – 3/4″ Cutting Diameter; 2″ Shank Length - The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. When combined with a upcut spiral bit they also form a beautiful hollow spiral. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips. This bit is designed to work with legacy ornamental machine to create traditional style barley twist. Excessive overall length may cause tool damage. You may try the following suggestion. Can also be used for general grooving or flat moldings. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits.

 

Magnate 0943 Chamfer 2 Flute Carbide Tipped Router Bit - 45 Degree 916 Cutting Height

Magnate 0943 Chamfer 2 Flute Carbide Tipped Router Bit – 45 Degree; 9/16″ Cutting Height

Magnate 0943 Chamfer 2 Flute Carbide Tipped Router Bit – 45 Degree; 9/16″ Cutting Height - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. In case a bit doesn’t come with a speed chart. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. You may try the following suggestion.

 

Magnate 9336 Multi-Spur Carbide Tipped Bit - 2-18 Cutting Diameter 12 Shank Diameter

Magnate 9336 Multi-Spur Carbide Tipped Bit – 2-1/8″ Cutting Diameter; 1/2″ Shank Diameter

Magnate 9336 Multi-Spur Carbide Tipped Bit – 2-1/8″ Cutting Diameter; 1/2″ Shank Diameter - 2-1/8″ cutting diameter 1/2″ shank diameter 6″ overall length. Cleaning bottom bit for industrial purpose is characterized with high hardness and long life, and resulting in nice finishing on woody pieces after cutting. Use on cnc and other automatic routers as well as hand held and table mounted portable routers. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish.

 

Makita SDS4 Plus - Carbide Tipped Bits 65 x 160 mm - Aggressive Drilling For Concrete Masonry

Makita SDS4 Plus – Carbide Tipped Bits 6.5 x 160 mm. – Aggressive Drilling For Concrete & Masonry

Makita SDS4 Plus – Carbide Tipped Bits 6.5 x 160 mm. – Aggressive Drilling For Concrete & Masonry - From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan. Sds4 plus rotary hammer drill bits 4 features that are specifically designed. The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed. Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely.

 

Magnate 2507 Plunge Ball End Carbide Tipped Router Bit - 1-18 Cutting Diameter

Magnate 2507 Plunge Ball End Carbide Tipped Router Bit – 1-1/8″ Cutting Diameter

Magnate 2507 Plunge Ball End Carbide Tipped Router Bit – 1-1/8″ Cutting Diameter - You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This bit creates a rounded inside edge on a slot that makes drawer opening easy. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.

 

Magnate 800 Core Box 2 Flute Carbide Tipped Router Bit - 18 Cutting Diameter 14 Shank Diameter

Magnate 800 Core Box 2 Flute Carbide Tipped Router Bit – 1/8″ Cutting Diameter; 1/4″ Shank Diameter

Magnate 800 Core Box 2 Flute Carbide Tipped Router Bit – 1/8″ Cutting Diameter; 1/4″ Shank Diameter - Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Up shear cutting angle clears chips out fast for accurate and chatter free performance. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. 817 is designed for nevada style gaming table chip trays. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Can be used with the legacy ornamental millÔ to cut indexed flutes and coves on spindle stock or parallel flutes on flat stock. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. For use in decorative fluting and sign making.

 

Magnate 416 Dovetail 2 Flute Carbide Tipped Router Bit - 18 Degree 12 Cutting Diameter

Magnate 416 Dovetail 2 Flute Carbide Tipped Router Bit – 18 Degree; 1/2″ Cutting Diameter

Magnate 416 Dovetail 2 Flute Carbide Tipped Router Bit – 18 Degree; 1/2″ Cutting Diameter - You may try the following suggestion. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. 14 degree dovetail may be used in conjunction with 14 degree butterfly spline bits to make butterfly spline glue joint. It is also equipped with wide open gullets for easy disposal of wood chips. It can also be used with legacy ornamental mill machines to create unique indexed dovetail slots at 90 degree or 120 degree spacing for furniture legs and three legged pedestals. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This bit is designed for making drawer fingers and for french dovetailing.

 

Magnate 1525 Extra Deep Core Box Carbide Tipped Router Bit - 516 Cutting Diameter

Magnate 1525 Extra Deep Core Box Carbide Tipped Router Bit – 5/16″ Cutting Diameter

Magnate 1525 Extra Deep Core Box Carbide Tipped Router Bit – 5/16″ Cutting Diameter - Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage.

 

Amana Tool HBM-102 3-Pc Hinge Boring 57 Long x 10mm Shank Carbide Tipped Bit Set Includes Two 30100

Amana Tool HBM-102 3-Pc Hinge Boring 57 Long x 10mm Shank Carbide Tipped Bit Set Includes Two #30100

Amana Tool HBM-102 3-Pc Hinge Boring 57 Long x 10mm Shank Carbide Tipped Bit Set Includes Two #30100 - 3/4″ overall diameter 1-1/4″ shank length. Carbide tipped.

 

Magnate 1724 Bull Nose Half Round Carbide Tipped Router Bit - 58 Bead Diameter

Magnate 1724 Bull Nose (Half Round) Carbide Tipped Router Bit – 5/8″ Bead Diameter

Magnate 1724 Bull Nose (Half Round) Carbide Tipped Router Bit – 5/8″ Bead Diameter - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. For bead cutting and edge rounding on picture frames, stair threads, window sills, etc. In case a bit doesn’t come with a speed chart. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning.

 

Magnate 2521 Plunge Ball End Carbide Tipped Router Bit - 38 Cutting Diameter 38 Cutting Length

Magnate 2521 Plunge Ball End Carbide Tipped Router Bit – 3/8″ Cutting Diameter; 3/8″ Cutting Length

Magnate 2521 Plunge Ball End Carbide Tipped Router Bit – 3/8″ Cutting Diameter; 3/8″ Cutting Length - Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This bit creates a rounded inside edge on a slot that makes drawer opening easy. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits.

 

Makita SDS4 Plus - Carbide Tipped Bits 7 x 160 mm - Aggressive Drilling For Concrete Masonry

Makita SDS4 Plus – Carbide Tipped Bits 7 x 160 mm. – Aggressive Drilling For Concrete & Masonry

Makita SDS4 Plus – Carbide Tipped Bits 7 x 160 mm. – Aggressive Drilling For Concrete & Masonry - Sds4 plus rotary hammer drill bits 4 features that are specifically designed. Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely. The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan. Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed.