Top 16 Jobber Drills

 

Champion Cutting Tool Brute Platinum XL5-564 Heavy Duty Jobber Drill Bits

Champion Cutting Tool Brute Platinum XL5-5/64 Heavy Duty Jobber Drill Bits

Champion Cutting Tool Brute Platinum XL5-5/64 Heavy Duty Jobber Drill Bits - Premium high speed steel and nomo surface treatment for longer tool life, fast penetration, and flexibility. Self centering 135 degree split point prevents drill from walking. Drill 3x longer than competitors drills drill 2x faster than cobalt drill accurate due to 135 split point and tapered web geometry. Better than cobalt xl5 is able to flex when cobalt drills chip or snap. Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials.

 

Bosch CO2155 716-Inch Cobalt SP Jobber Drill Bit

Bosch CO2155 7/16-Inch Cobalt SP Jobber Drill Bit

Bosch CO2155 7/16-Inch Cobalt SP Jobber Drill Bit - Cobalt formulation provides overall bit hardness of 66-68 hrc for penetration of very tough abrasive materials. 135 degree split point starts drilling on contact. Under high drilling temperatures bits stay sharper longer than standard hss. Thicker web increases rigidity in hard materials. Bosch co2155 7/16″ cobalt drill bit. Able to withstand very high temperature drilling applications for extended periods of time. No walking or skating.

 

Cobra Carbide 32796 Micro Grain Solid Carbide Jobber Drill Bit Uncoated Bright Finish Round Shank Straight Flute 140 Degrees Special Point 3164 Size 3-1116 Length Pack of 1

Cobra Carbide 32796 Micro Grain Solid Carbide Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degrees Special Point, 31/64″ Size, 3-11/16″ Length (Pack of 1)

Cobra Carbide 32796 Micro Grain Solid Carbide Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degrees Special Point, 31/64″ Size, 3-11/16″ Length (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. The added web strength of the straight flutes and special point configuration easily penetrate work pieces with minimal deflection. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications.

 

Huot Drill Bit Index for Jobber Length Sizes 116 to 12 in 164 Increments

Huot Drill Bit Index for Jobber Length Sizes 1/16″ to 1/2″ in 1/64″ Increments

Huot Drill Bit Index for Jobber Length Sizes 1/16″ to 1/2″ in 1/64″ Increments - 75 inches (h x w x d). The labeled storage holes provide quick identification and organization. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. Huot manufactures cutting tool storage systems. )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. (h is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. Drill bits are not included. The company, founded in 1926 and headquartered in st. The huot drill bit index holds up to 29 jobber length drill bits in fractional sizes 1/16″ to 1/2″ in 1/64″ increments and is made in usa. The index is made of steel with an epoxy finish and has a snap-lock cover for durability and protection. The index is 7 × 4 × 1. Paul, mn, meets international organization for standardization (iso) standard 9001.

 

Bosch CO2145 932-Inch Cobalt SP Jobber Drill Bit

Bosch CO2145 9/32-Inch Cobalt SP Jobber Drill Bit

Bosch CO2145 9/32-Inch Cobalt SP Jobber Drill Bit - Cobalt formulation provides overall bit hardness of 66-68 hrc for penetration of very tough abrasive materials. Thicker web increases rigidity in hard materials. 135 degree split point starts drilling on contact. No walking or skating. Able to withstand very high temperature drilling applications for extended periods of time. Under high drilling temperatures bits stay sharper longer than standard hss. Bosch co2145 9/32″ cobalt drill bit.

 

Champion Cutting Tool Heavy Duty BlackGold Jobber Drill Bits 135 Degree Split Point XGO-38 6 pieces per pack-MADE IN USA

Champion Cutting Tool Heavy Duty BlackGold Jobber Drill Bits, 135 Degree Split Point: XGO-3/8 (6 pieces per pack)-MADE IN USA

Champion Cutting Tool Heavy Duty BlackGold Jobber Drill Bits, 135 Degree Split Point: XGO-3/8 (6 pieces per pack)-MADE IN USA - Made in usa. Recommended for drilling hard materials, high tensile alloy steels and stainless steels. Champion heavy duty blackgold jobber drills outperform ordinary jobber drills by penetrating faster and lasting longer. Made of premium high speed steel blackgold surface treatment holds lubricant for smoother drilling. Self centering 135 degree split point prevents drill from walking.

 

Irwin Industrial Tools 73136 TurboMax Fractional Straight Shank Jobber Length Metal Index Drill Bit Set 13-Piece

Irwin Industrial Tools 73136 TurboMax Fractional Straight Shank Jobber Length Metal Index Drill Bit Set, 13-Piece

Irwin Industrial Tools 73136 TurboMax Fractional Straight Shank Jobber Length Metal Index Drill Bit Set, 13-Piece - Three-flatted shank design provides better chuck grip and reduces slippage ideal for use in keyless chucks. Full lifetime warranty. Revolutionary tip design stays sharper longer and drills up to 28 percent faster than other leading drill bits. Bit is constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance. Three flatted shank on 3/16-inch and above.

 

IRWIN Tools 63124 38-Inch Cobalt 135-Degree Jobber Length Drill Bit Pack of 6

IRWIN Tools 63124 3/8-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 6

IRWIN Tools 63124 3/8-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 6 - Cobalt steel helps dissipate heat for longer life. Construction for durability in abrasive materials. Jobber drill bits made with m-35 cobalt steel. 135-degree split point tip for reduced bit walking. Straight shank works in both keyed and key-less drill chucks.

 

Drillco 400N Series Nitro 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point includes 116 - 12 in 164 increments Sizes 1 - 60 and A - Z

Drillco 400N Series Nitro 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z

Drillco 400N Series Nitro 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 115 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments, from #1 to #60, and from a to z. Round shanks allow use with a wide variety of toolholding systems. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Bosch TI2135 Titanium SP Jobber Drill Bit Carded 18-Inch 2-Pack

Bosch TI2135 Titanium SP Jobber Drill Bit, Carded, 1/8-Inch, 2-Pack

Bosch TI2135 Titanium SP Jobber Drill Bit, Carded, 1/8-Inch, 2-Pack - Titanium drill bits last 6x longer than high speed steel. Speed helix design penetrates 3x faster than standard bits. 135 degree split point starts on contact with no walking or skating, no center punch required.

 

Bosch TI2137 532-Inch Titanium SP Jobber Drill Bit

Bosch TI2137 5/32-Inch Titanium SP Jobber Drill Bit

Bosch TI2137 5/32-Inch Titanium SP Jobber Drill Bit - Titanium drill bits last 6x longer than high speed steel bits. Super hard titanium nitride coating protects bits from chipping and cracking. Lasts 6x longer than high speed steel. Speed helix design penetrates 3x faster than standard bits.

 

Vermont American 11845 Number 45 Jobber Drill Bit Black Oxide Wire Gauge

Vermont American 11845 Number 45 Jobber Drill Bit, Black Oxide Wire Gauge

Vermont American 11845 Number 45 Jobber Drill Bit, Black Oxide Wire Gauge - Popular taps up to 1/4-24 require use of wire gauge drill bits. Each drill bit features a 118-degree standard point configuration for general purpose drilling applications. Diameters fall between standard fractional sizes. Wire gauge drill bits are used in wood, metal and plastic applications where more precisely sized holes are required. The bits drill an exact hole size, making them ideal for tapping.

 

Viking Drill and Tool by Norseman 93840 SP-115 Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set 115 Piece

Viking Drill and Tool by Norseman 93840 SP-115 Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (115 Piece)

Viking Drill and Tool by Norseman 93840 SP-115 Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (115 Piece) - 135-degree split point, 1/16 -1/2 by 64ths, a, z, #1, #60. 115 pc set premium high speed steel heavy duty nas 907b 135-degree split point. Special hi-molybdenum tool steel/ gold oxide. Nas 907b heavy duty jobber. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.

 

Bosch TI2138 1164-Inch Titanium SP Jobber Drill Bit

Bosch TI2138 11/64-Inch Titanium SP Jobber Drill Bit

Bosch TI2138 11/64-Inch Titanium SP Jobber Drill Bit - Speed helix design penetrates 3x faster than standard bits. 135 degree split point starts on contact with no walking or skating and no center punch is required. Super hard titanium nitride coating protects bits from chipping and cracking. Titanium drill bits last 6x longer than high speed steel bits.

 

YG-1 High Speed Steel Gold-P Jobber Drill Bit TiN Finish Straight Shank Slow Spiral 135 Degree 104mm Diameter x 133mm Length Pack of 1

YG-1 High Speed Steel Gold-P Jobber Drill Bit, TiN Finish, Straight Shank, Slow Spiral, 135 Degree, 10.4mm Diameter x 133mm Length (Pack of 1)

YG-1 High Speed Steel Gold-P Jobber Drill Bit, TiN Finish, Straight Shank, Slow Spiral, 135 Degree, 10.4mm Diameter x 133mm Length (Pack of 1) - Bright body tin coating on working part. 135 degree point angle. Right hand spiral, wider flutes. Made of cobalt steel. Applicable for drilling in steel, cast steel, alloyed and non-alloyed, grey cast iron, graphite, malleable cast iron.

 

Vermont American 11831 Number 31 Jobber Drill Bit Black Oxide Wire Gauge

Vermont American 11831 Number 31 Jobber Drill Bit, Black Oxide Wire Gauge

Vermont American 11831 Number 31 Jobber Drill Bit, Black Oxide Wire Gauge - Wire gauge drill bits are used in wood, metal and plastic applications where more precisely sized holes are required. The bits drill an exact hole size, making them ideal for tapping. Each drill bit features a 118-degree standard point configuration for general purpose drilling applications. Diameters fall between standard fractional sizes. Popular taps up to 1/4-24 require use of wire gauge drill bits.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.