Top 16 Best Thread Sizes

 

18-8 Stainless Steel Prairie Bolt Plain Finish Flange Socket Cap Head Hex Socket Drive 10-32 Thread Size 0190 Shoulder Diameter 1-18 Grip Length Made in US Pack of 1

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1)

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1) - Hex socket drive has a hexagonal slot that turns using an allen key driver. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Made in usa.

 

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap Steam Oxide Round Shank with Square End Bottoming Chamfer 14-20 Thread Size H3 Tolerance

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4″-20 Thread Size, H3 Tolerance

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4″-20 Thread Size, H3 Tolerance - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0625-inches thread length. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 1 Phillips Drive 4-40 Thread Size 38 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100) - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Hex washer head has a flange for additional grip with the mating surface. Slotted drive has a linear slot for use with a flat-blade driver.

 

Steel Sheet Metal Screw Black Oxide Finish  Pan Head Phillips Drive Type A 10-12 Thread Size 12 Length Pack of 100

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1/2″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1/2″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets DIN 7985 3 Phillips Drive M6-1 Thread Size 20 mm Length Fully Threaded Import Pack of 50

Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #3 Phillips Drive, M6-1 Thread Size, 20 mm Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #3 Phillips Drive, M6-1 Thread Size, 20 mm Length, Fully Threaded, Import (Pack of 50) - Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 3 Phillips Drive 12-24 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #3 Phillips Drive, #12-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #3 Phillips Drive, #12-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

410 Stainless Steel Thread Rolling Screw for Plastic Passivated Finish Pan Head Phillips Drive 4-20 Thread Size 12 Length Pack of 50

410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 50)

410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 50) - Pan head has a flat top and short vertical sides with a rounded top edge. Passivated finish enhances the natural corrosion resistance of stainless steel. Thread rolling screw recommended for use in plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments.

 

Steel Pan Head Machine Screw Zinc Plated Meets JIS B1111 2 Phillips Drive M4-07 Thread Size 20 mm Length Fully Threaded Imported Pack of 25

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 20 mm Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 20 mm Length, Fully Threaded, Imported (Pack of 25) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface.

 

Walter Enduro-Flex Turbo Abrasive Flap Disc Type 29 58-11 Thread Size Plastic Backing Ceramic 4-12 Diameter Grit 3660 Pack of 10

Walter Enduro-Flex Turbo Abrasive Flap Disc, Type 29, 5/8″-11 Thread Size, Plastic Backing, Ceramic, 4-1/2″ Diameter, Grit 36/60 (Pack of 10)

Walter Enduro-Flex Turbo Abrasive Flap Disc, Type 29, 5/8″-11 Thread Size, Plastic Backing, Ceramic, 4-1/2″ Diameter, Grit 36/60 (Pack of 10) - Long life and high overall material removal. Great for stock removal, edge breaking and blending applications. Runs cool due to turbofan backing pad design. Safe to use on all metals, including stainless steel, aluminum and other sensitive alloys. Aggressive grinding thanks to cyclone technology (exclusive abrasive grain blend).

 

Steel Sheet Metal Screw Zinc Plated Hex Head Slotted Drive Type A 14-10 Thread Size 34 Length Pack of 50

Steel Sheet Metal Screw, Zinc Plated, Hex Head, Slotted Drive, Type A, #14-10 Thread Size, 3/4″ Length (Pack of 50)

Steel Sheet Metal Screw, Zinc Plated, Hex Head, Slotted Drive, Type A, #14-10 Thread Size, 3/4″ Length (Pack of 50) - Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance. Hex head has six flat sides that a wrench can grip from the side, enabling use when there is no space above for a driver. Slotted drive has a linear slot for use with a flat-blade driver.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type A 8-15 Thread Size 34 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100) - Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 1 Phillips Drive 4-40 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 1 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1″ Length, Fully Threaded, Import (Pack of 100) - Hex socket drive has a hexagonal slot that turns using an allen key driver. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Made in usa.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets DIN 7985 1 Phillips Drive M2-04 Thread Size 6 mm Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #1 Phillips Drive, M2-0.4 Thread Size, 6 mm Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #1 Phillips Drive, M2-0.4 Thread Size, 6 mm Length, Fully Threaded, Import (Pack of 100) - Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened.

 

Keeney K835-12 3-Inch Toilet Flush Valve Fits Toto Gerber Mansfield Crane Jacuzzi or Any Flush Valve with Similar Thread Size White Green

Keeney K835-12 3-Inch Toilet Flush Valve Fits Toto, Gerber, Mansfield, Crane, Jacuzzi or Any Flush Valve with Similar Thread Size, White, Green

Keeney K835-12 3-Inch Toilet Flush Valve Fits Toto, Gerber, Mansfield, Crane, Jacuzzi or Any Flush Valve with Similar Thread Size, White, Green - 3-inch toilet flush valve. Adjustable no cut overflow tube. Includes all nuts and washers. Fits toto, gerber, mansfield, crane, jacuzzi toilets or any flush valve with similar thread size. Adjustable water saving flapper.

 

Nylon 66 Hex Nut Black M3-05 Thread Size 55 mm Width Across Flats 24 mm Thick Pack of 100

Nylon 6/6 Hex Nut, Black, M3-0.5 Thread Size, 5.5 mm Width Across Flats, 2.4 mm Thick (Pack of 100)

Nylon 6/6 Hex Nut, Black, M3-0.5 Thread Size, 5.5 mm Width Across Flats, 2.4 mm Thick (Pack of 100) - Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. The material is a strong yet lightweight plastic and is nonconductive. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. Several different nut styles fit a variety of application and installation requirements. The nylon 6/6 hex nut has a black color. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties.