Top 16 Best Tap Dies

 

TruePower 02-0554 Alloy Steel SAEMetric Tap and Die Set 60 Piece

TruePower 02-0554 Alloy Steel SAE/Metric Tap and Die Set, 60 Piece

TruePower 02-0554 Alloy Steel SAE/Metric Tap and Die Set, 60 Piece - 75, thread gauge, tap handle, die handle, small tap chuck and molded case. Fine quality. Set includes coarse and fine threads numbered taps and dies from #4, 40 to #12, 24 and fractional taps and dies from 1/4″, 28 to 1/2″, 20, 1/8″, 27 npt tap and die, metric tap and dies from m3 x. . 5 to m12 x 1.

 

Hanson 1903ZR Tap 14-18Npt Taper for Tap Die Extraction

Hanson 1903ZR Tap 1/4″-18Npt Taper, for Tap Die Extraction

Hanson 1903ZR Tap 1/4″-18Npt Taper, for Tap Die Extraction - Nominal size of the tap is that of the pipe fitting being tapped. Taps are tapered at a rate of 3/4 inches per foot. Each taper tap is used to cut internal threads in pipes. This taper tap is ideal for pipe fittings. 1/4″ size with 18 npt (national pipe taper).

 

12 - 28 Tap and Die Set

1/2″ – 28 Tap and Die Set

1/2″ – 28 Tap and Die Set - Extra fine 28 thread per inch. 1/2″, 28 hss right hand thread tap and die set.

 

SE TM15 15-Piece Tap Die Set

SE TM15 15-Piece Tap & Die Set

SE TM15 15-Piece Tap & Die Set - Se is a registered trademark protected by us trademark law. You will enjoy the quality, function and usefulness this 15pc tap & die set has to offer. Se is committed to providing the customer with the best source for value possible on the market. Se is proud to present our 15pc tap & die set—a useful tool for threading wire, stripping screws, jewelry making, repair and other small projects. Features of our product include (1) dimensions 3-1/4” x 7/8” x 1/16” (2) taps 14 die 1 (3) die increments 7mm to 20mm (4) material high carbon steel (5) comes in a convenient pouch (6) small size set for detailed projects please note product comes lubricated in the pouch.

 

NEW 80 piece TAP AND DIE SET both SAE METRIC  CASES

NEW 80 piece TAP AND DIE SET both SAE & METRIC + CASES

NEW 80 piece TAP AND DIE SET both SAE & METRIC + CASES - 3-, 4-, 5-, and 6-flute plug taps and dies for hand threading applications. Storage case keeps everything neat and organized. Tapered coarse and fine taps start easily and prevent overthreading. Cut new material or chase lightly damaged threads. Hardened tungsten alloy high speed steel construction.

 

GearWrench 3880 Tap and Die Ratcheting Wrench 5 Piece Drive Tool Set

GearWrench 3880 Tap and Die Ratcheting Wrench 5 Piece Drive Tool Set

GearWrench 3880 Tap and Die Ratcheting Wrench 5 Piece Drive Tool Set - Patented twist lock guide system reduces back walk of die guide and keeps dies centered while cutting threads. Ideal for working in tightly confined areas. ) 5. . Reversible lever with 5deg ratcheting arc eliminates hand-over-hand turning. Pieces (qty.

 

TAP AND DIE Set 80 piece SAE METRIC wCases Screw Extractor Remover

TAP AND DIE Set 80 piece SAE & METRIC w/Cases Screw Extractor Remover

TAP AND DIE Set 80 piece SAE & METRIC w/Cases Screw Extractor Remover - Description this 80 piece metric and sae tap & die set contains everything you will need to repair and cut internal and external threads and is machined to exacting standards. Includes the following metric thread sizes 3 x 05mm, 3 x 06mm, 4 x 07mm, 4 x 075mm, 5 x 08mm, 5 x 09mm, 6 x 075mm, 6 x 10mm, 7 x 075mm, 8 x 10mm, 8 x 125mm, 10 x 125mm, 10 x 15mm, 12 x 15mm, 12 x 175mm also includes 1/8 npt x 27 tap wrench, t-handle wrench, die handle, screwdriver, screw pitch gauge and carrying case. Includes the following sae thread sizes 4 x 40, 6 x 32, 8 x 32, 10 x 32, 10 x 24, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 1/2 x 20, 1/8npt x 27 also includes 1/8 npt x 27 tap wrench, t-handle wrench, die handle, screwdriver, screw pitch gauge and carrying case.

 

Craftsman 39 Piece Metric Tap And Die Set

Craftsman 39 Piece Metric Tap And Die Set

Craftsman 39 Piece Metric Tap And Die Set - Precision machined to cut clean, accurate threads. Sizes in picture 2, included listed in description. Tap holders tilt down for easy access keeping taps secure and organized. Tough carbon alloy steel for long life. 16- metric taps, 16- metric dies, 2- 1/8-28 bsp pipe tap & die.

 

NIHAO Machine Screw Metric Tap and Die Bit Set(20 Piece)

NIHAO Machine Screw Metric Tap and Die Bit Set(20 Piece)

NIHAO Machine Screw Metric Tap and Die Bit Set(20 Piece) - Includes both fine and coarse threaded taps and die in metric sizing. High quality gcr15 bearing steel is selected to prolong the beering’s service life, provides superior blade hardness and cutting performance. Cuts and renews external and internal threads to exacting standards. Tapered and precisely machined teeth allows easy start and prevents overthreading. Ideal to create new threads or repair lightly damaged threads.

 

Garrett Wade Complete Tap Die Set 34 In

Garrett Wade Complete Tap Die Set 3/4 In.

Garrett Wade Complete Tap Die Set 3/4 In. - Three-part set in sizes from 1/2 inch to 1 and 1/2 inches. Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter. Bottoming tap finishes off the female section. Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads.

 

Fractional Tap and Die Set 17-Piece

Fractional Tap and Die Set (17-Piece)

Fractional Tap and Die Set (17-Piece) - High carbon steel taps ideal for precise threads. The dewalt dw1451 17-piece fractional tap and small hexagon die set is a multi-purpose tap and die set this set is ideal for repairing and creating a wide range of internal and external threads made from high carbon steel, the taps and dies are machined for precise threading, and the black oxide drill bits are designed for long life. Includes 1 of each of the following 6-32 tap, 8-32 tap, 10-24 tap, 10-32 tap, 1/4 in-20 tap, 6-32 die, 8-32 die, 10-24 die, 10-32 die, 1/4 in-20 die,# 36 drill bit, #29 drill bit, #25 drill bit, #21 drill bit, #7 drill bit for, 1/4 in tap handle, 5/8. Black oxide split point drill bits provide greater wear resistance. High carbon steel hexagon dies are ideal for cutting external threads.

 

Hanson 12436 Die Stock 1-716 Hex Adj for Tap Die Extraction

Hanson 12436 Die Stock 1-7/16″ Hex Adj, for Tap Die Extraction

Hanson 12436 Die Stock 1-7/16″ Hex Adj, for Tap Die Extraction - Use for threading hexagon or round dies. These irwin hanson adjustable guide die stock handles maintain alignment for accurate, straight threading.

 

Craftsman 75 pc Inch Metric tap and die Set

Craftsman 75 pc Inch & Metric tap and die Set

Craftsman 75 pc Inch & Metric tap and die Set - Hex-shaped dies permit use of sockets and wrenches as well as die stocks. Craftsman combination carbon steel set combines inch and metric sizes in one convenient kit. Set includes 7 drive tools with accessories, 17 sae plug taps, 17 sae hex dies, 17 metric plug taps, 17 metric hex dies and sturdy storage case with handle. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.

 

vidaXL 110 pcs Tap Die Tool Set

vidaXL 110 pcs Tap & Die Tool Set

vidaXL 110 pcs Tap & Die Tool Set - Delivery includes 1 x t-type tap wrench (m3, m6), 2 x die wrench (1″ / 15″ o/d), 2 x tap wrench (m3, m12, m6, m20), 35 x taper tap, 35 x plug tap, 35 x die. (m6 x 10, m8 x 125, m10 x 10, m10 x 15, m11 x 15, m12 x 125, m12 x 175, m14 x 125, m18 x 15,m4, 40, m6, 32, m8, 32, m10, 24, m10, 32, m12, 24, m1/4, 20, m1/4, 24, m1/4, 28, m1/4, 32, m5/16, 18, m5/16, 24, m3/8, 16, m3/8, 24, m7/16, 14, m7/16, 20, m1/2, 13, m1/2, 20, m9/16, 12, m9/16, 18, m5/8, 18, m5/8, 11, m3/4, 16, m3/4, 10, m1/8, 27, m1/4, 18). Material carbon steel.

 

Hanson 6854 Die 58-18 1 716 NF Sh for Tap Die Extraction

Hanson 6854 Die 5/8-18 1 7/16 NF Sh, for Tap Die Extraction

Hanson 6854 Die 5/8-18 1 7/16 NF Sh, for Tap Die Extraction - Dies are recommended for use with hexagon die stocks. Dies are made of hcs (high-carbon steel) for lasting durability. Dies are ideal for maintenance and repair work. 5/8″, 18 nf. Threading die can be used with a wrench or socket when space is limited.

 

Irwin Tools 1813817 Performance Threading System Deluxe Tap Die and Drill Bit Set 116-Piece

Irwin Tools 1813817 Performance Threading System Deluxe Tap, Die and Drill Bit Set, 116-Piece

Irwin Tools 1813817 Performance Threading System Deluxe Tap, Die and Drill Bit Set, 116-Piece - Spiral-flute screw extractor ex-1, ex-2, ex-3, ex-4 and ex-5. Fractional 1/4″, 20 nc, 1/4″, 28 nf, 5/16″, 18 nc, 5/16″, 24 nf, 3/8″, 16 nc, 3/8″, 24 nf, 7/16″, 14 nc, 7/16″, 20 nf, 1/2″, 13 nc and 1/2″, 20 nf. Tap and die set includes pipe 1/8″, 27 npt and 1/8″, 28 bsp. Metric 3mm, 05, 4mm, 07, 4mm, 075, 5mm, 08, 5mm, 09, 6mm, 10, 7mm, 10, 8mm, 10, 8mm, 125, 9mm, 10, 9mm, 125, 10mm, 125, 10mm, 15, 11mm, 15, 12mm, 125 and 12mm, 175. Machine screw 4, 40 nc, 6, 32 nc, 8, 32 nc, 10, 24 nc, 10, 32 nf and 12, 24 nc.