Top 15 Stainless Steel Sheet Metal Screws for 2020

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Phillips Drive Type AB 10-16 Thread Size 1 Length Pack of 25 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 1″ Length (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 1″ Length (Pack of 25) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type AB 10-16 Thread Size 1-34 Length Pack of 25 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-3/4″ Length (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-3/4″ Length (Pack of 25) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type A 8-15 Thread Size 34 Length Pack of 100 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Star Drive Type AB 4-24 Thread Size 12 Length Pack of 100 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type AB, #4-24 Thread Size, 1/2″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type AB, #4-24 Thread Size, 1/2″ Length (Pack of 100) #ad - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type A 6-18 Thread Size 516 Length Pack of 100 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #6-18 Thread Size, 5/16″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #6-18 Thread Size, 5/16″ Length (Pack of 100) #ad - Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish 82 degrees Oval Head Phillips Drive Type A 6-18 Thread Size 1-14 Length Pack of 100 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Oval Head, Phillips Drive, Type A, #6-18 Thread Size, 1-1/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Oval Head, Phillips Drive, Type A, #6-18 Thread Size, 1-1/4″ Length (Pack of 100) #ad - Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Oval head has a 82-degree cone shape for a flush fit in a countersunk hole and has a slightly rounded top that sits above the mated surface. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Black Oxide Finish Pan Head Phillips Drive Type AB 14-14 Thread Size 1 Length Pack of 10 #ad

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, 1/4″-14 Thread Size, 1″ Length (Pack of 10)

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, 1/4″-14 Thread Size, 1″ Length (Pack of 10) #ad - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type AB 8-18 Thread Size 2 Length Pack of 25 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #8-18 Thread Size, 2″ Length (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #8-18 Thread Size, 2″ Length (Pack of 25) #ad - Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Undercut 82 degrees Flat Head Phillips Drive Type AB 2-32 Thread Size 14 Length Pack of 100 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #2-32 Thread Size, 1/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #2-32 Thread Size, 1/4″ Length (Pack of 100) #ad - Undercut flat head has a flat top with a 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Hex Washer Head Hex Drive Type AB 14-14 Thread Size 34 Length Pack of 10 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Hex Drive, Type AB, 1/4″-14 Thread Size, 3/4″ Length (Pack of 10)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Hex Drive, Type AB, 1/4″-14 Thread Size, 3/4″ Length (Pack of 10) #ad - Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Undercut 82 degrees Flat Head Phillips Drive Type AB 12 Thread Size 12 Length Pack of 25 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #12 Thread Size, 1/2″ Length (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #12 Thread Size, 1/2″ Length (Pack of 25) #ad - Undercut flat head has a flat top with a 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Undercut 82 degrees Flat Head Phillips Drive Type AB 10-16 Thread Size 38 Length Pack of 50 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/8″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/8″ Length (Pack of 50) #ad - Undercut flat head has a flat top with a 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

Stainless Steel Sheet Metal Screw Plain Finish Flat Head Phillips Drive Self-Drilling Point 34 Length 6-20 Threads Pack of 100 #ad

Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 3/4″ Length, #6-20 Threads (Pack of 100)

Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 3/4″ Length, #6-20 Threads (Pack of 100) #ad - Â Â   Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.   These properties account for their extremely wide use in practically every industry.    Austenitic stainless steels are designated by a 3 digit sae stainless steel grade beginning with the number 3 (e. Sheet metal screws have a pointed end and widely spaced threads. The phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Where the 18 refers to the % of chromium and 8 to the % of nickel contained in the material. 15% carbon, along with nickel (or manganese), and other alloying elements. Length is measured from the top of the head. 304, 316). They’re self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended. G. Austenitic stainless steels are alloys of iron and carbon that contain between 16% and 30% chromium, a maximum of 0. Self-drilling points are excellent for use with sheet metal.   The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   another common naming convention for austenitic stainless steels are 18/8, 18/10, 18/0, etc.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Phillips Drive Type A 10-12 Thread Size 1 Length Pack of 50 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1″ Length (Pack of 50) #ad - 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type AB 10-16 Thread Size 1-14 Length Pack of 25 #ad

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-1/4″ Length (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-1/4″ Length (Pack of 25) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.