Top 15 M6 Metrics for 2019

 

The Hillman Group 43285 M6 Metric Hardened Split Lock Washer 60-Pack #ad

The Hillman Group 43285 M6 Metric Hardened Split Lock Washer, 60-Pack

The Hillman Group 43285 M6 Metric Hardened Split Lock Washer, 60-Pack #ad - Lock washers are commonly used in any application using a bolt where two pieces are being drawn together. This split lock washer provides a circular bearing surface with offset split ends which help bite into the mating material to provide a locking feature when tightened beneath a nut. . It is round with a hole in the center and can be used where loosening from corrosion or vibration is a concern.

 

CRL M6 Metric Hanger Bolt Driver - 165HBM6 #ad

CRL M6 Metric Hanger Bolt Driver – 165HBM6

CRL M6 Metric Hanger Bolt Driver – 165HBM6 #ad - Instructions first, drill a pilot for hanger bolt second, replace drill bit with appropriate hanger bolt driver third, slip on appropriate flat washer and thread on hex nut fourth, thread hanger bolt into the hanger bolt driver and drive hanger bolt into pilot hole up to where it is stopped by the flat washer lastly, remove hanger bolt driver from hanger bolt. The flat washer and nut gives you the ability to help remove the hanger bolt driver if it gets stuck on the hanger bolt. Crl hanger bolt drivers make installing m6 hanger bolts into wood studs a breeze. Minimum order is one each.

 

The Hillman Group 1435 M6 - Metric Split Lock Washer 110-Pack #ad

The Hillman Group 1435 M6 – Metric Split Lock Washer 110-Pack

The Hillman Group 1435 M6 – Metric Split Lock Washer 110-Pack #ad - . This split lock washer provides a circular bearing surface with offset split ends which help bite into the mating material to provide a locking feature when tightened beneath a nut. It is round with a hole in the center and can be used where loosening from corrosion or vibration is a concern. Lock washers are commonly used in any application using a bolt where two pieces are being drawn together.

 

The Hillman Group 45562 M6 Metric Whiz Nut 50-Pack #ad

The Hillman Group 45562 M6 Metric Whiz Nut, 50-Pack

The Hillman Group 45562 M6 Metric Whiz Nut, 50-Pack #ad - . Whiz-lock, one-piece, all-metal, free-spinning nuts have been proven to overcome vibration and a variety of other forces the underside, or bearing surface of the fastener, has a series of spiraling serrations, or teeth, to provide a locking, reliable hold the application of this nut is as simple as spinning it on.

 

Allied Titanium 0062612 Pack of 20 M6 Metric Titanium Flat Washer X 16mm Thick X 12mm OD Grade 5 Ti-6Al-4V #ad

Allied Titanium 0062612, (Pack of 20) M6 Metric Titanium Flat Washer X 1.6mm Thick X 12mm OD, Grade 5 (Ti-6Al-4V)

Allied Titanium 0062612, (Pack of 20) M6 Metric Titanium Flat Washer X 1.6mm Thick X 12mm OD, Grade 5 (Ti-6Al-4V) #ad - M6 allied titanium flat washer x 16mm thick x 12mm outside diameter. Grade 5 (ti-6al-4v) titanium with polished finish. Titanium is good for use in or near saltwater. General tolerance +0/-043 mm. True titanium(tm), stronger, lighter and corrosion free.

 

Dormer E005M6 Spiral Point Taps Bright Coating M6 Metric Coarse Full Length 212 Flute Length 05075 Shank Diameter 02550 #ad

Dormer E005M6 Spiral Point Taps, Bright Coating, M6, Metric Coarse, Full Length 2.1/2″, Flute Length 0.5075″, Shank Diameter 0.2550″

Dormer E005M6 Spiral Point Taps, Bright Coating, M6, Metric Coarse, Full Length 2.1/2″, Flute Length 0.5075″, Shank Diameter 0.2550″ #ad - Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Spiral point pushes chips ahead of tool to reduce clogging. Plug chamfer for easier starting and correct perpendicular alignment. Spiral point and straight flutes for cutting threads in through holes. Gold oxide finish reduces grinding stress within the tool.

 

Clarik Threaded Rod-M6 Metric Thread 1 Metre Long X 5 Pcs by Clarik #ad

Clarik Threaded Rod-M6 Metric Thread 1 Metre Long X 5 Pcs by Clarik

Clarik Threaded Rod-M6 Metric Thread 1 Metre Long X 5 Pcs by Clarik #ad - Stainless steel. Clarik threaded rod-m6 metric thread 1 metre long x 5 pcs.

 

BQLZR 304 Stainless Steel 12cm Thread Length Button Head Hex Socket Cap Screws Bolts M6 Metric Pack of 25 #ad

BQLZR 304 Stainless Steel 1.2cm Thread Length Button Head Hex Socket Cap Screws Bolts M6 Metric Pack of 25

BQLZR 304 Stainless Steel 1.2cm Thread Length Button Head Hex Socket Cap Screws Bolts M6 Metric Pack of 25 #ad - Note the color of the item may vary slightly due to photography and your own computer applications machinery and industrial fasteners material 304 stainless steel color silvery metric thread m6 thread length 12mm/0. 1. 80g package include 25x screws bolt. 47 inch size approx. 6×0. 5×1 cm/0. 4 inch weight approx.

 

The Hillman Group 3391 M6 Metric Acorn Nut 15-Pack #ad

The Hillman Group 3391 M6 Metric Acorn Nut, 15-Pack

The Hillman Group 3391 M6 Metric Acorn Nut, 15-Pack #ad - . Often used in hobby and furniture projects. Offers protection of threads and a decorative appearance as a finishing fastener. Acorn nuts have a dome top and when threaded on a fastener hide exposed threaded ends and provide a finished look.

 

The Hillman Group 44996 M6 Metric Stainless Steel Fender Washer 12-Pack #ad

The Hillman Group 44996 M6 Metric Stainless Steel Fender Washer, 12-Pack

The Hillman Group 44996 M6 Metric Stainless Steel Fender Washer, 12-Pack #ad - . This fender washer is a flat washer with a thinner body and an increased outer diameter offering greater surface bearing they are chosen when a large outer diameter is required for an increased bearing surface and surface load reduction designed for auto body repair, fender washers are commonly used in sheet metal work, plumbing and electrical applications where a large washer diameter is needed.

 

Allied Titanium 0007292 Pack of 20 M6 Metric Titanium Flat Washer X 16mm Thick X 12mm OD Grade 2 CP #ad

Allied Titanium 0007292, (Pack of 20) M6 Metric Titanium Flat Washer X 1.6mm Thick X 12mm OD, Grade 2 (CP)

Allied Titanium 0007292, (Pack of 20) M6 Metric Titanium Flat Washer X 1.6mm Thick X 12mm OD, Grade 2 (CP) #ad - True titanium(tm), stronger, lighter and corrosion free. Titanium is good for use in or near saltwater. Grade 2 (cp) titanium with polished finish. General tolerance +0/-043 mm. M6 allied titanium flat washer x 16mm thick x 12mm outside diameter.

 

The Hillman Group 4120 M6 Metric Flat Washer 50-Pack #ad

The Hillman Group 4120 M6 Metric Flat Washer (50-Pack)

The Hillman Group 4120 M6 Metric Flat Washer (50-Pack) #ad - The flat washer provides a greater bearing surface which helps prevent a nut or bolt head from tearing through the material. Used in applications with nuts and bolts. Flat washers are commonly used in decks and fence building. . The called out size is the inner diameter of the washer.

 

CNBTR Silver 6mm Female Left Hand M6 Metric Threaded Rod End Joint Bearing Pack of 2 #ad

CNBTR Silver 6mm Female Left Hand M6 Metric Threaded Rod End Joint Bearing Pack of 2

CNBTR Silver 6mm Female Left Hand M6 Metric Threaded Rod End Joint Bearing Pack of 2 #ad - Specification materialzinc alloy colorsilver thread holecounterclockwise neck and inner hole diameter6mm dimension40 x 20mm/1. 79″(l x w) weight56g package include 2 x female threaded rod end joint bearing. Since the outer spherical inlaid with composite material, so the bearing in the work can generate self lubrication. Feature right hand thread no maintenance required oscillating bearing widely used in hydraulic cylinder,forging machine,auto damper and other machine. 57 x 0. Inserts are in two half bronze rings metal to metal support for heavy shock loads inner ball ring ,bearing steel ,polish ,hard- chromed plated fitmentfit for budget motorsport, marine and industrial applications the bearing can bear great load.

 

Colony Chrome Long Pike Nuts Pair - Fit M6 6mm Metric Bolt #ad

Colony Chrome Long Pike Nuts (Pair) – Fit M6 (6mm) Metric Bolt

Colony Chrome Long Pike Nuts (Pair) – Fit M6 (6mm) Metric Bolt #ad - Sold in pairs (2). Fit m6 (6mm) bolt, 10 thread. Top quality, long pike nuts from colony. Approx 30mm (12 inches) long, made from chrome plated steel.

 

Dormer E007M6 Spiral Flute Taps M6 Metric Coarse Full Length 212Flute Length 03937 Shank Diameter 02550 #ad

Dormer E007M6 Spiral Flute Taps, M6, Metric Coarse, Full Length 2.1/2″Flute Length 0.3937″, Shank Diameter 0.2550″

Dormer E007M6 Spiral Flute Taps, M6, Metric Coarse, Full Length 2.1/2″Flute Length 0.3937″, Shank Diameter 0.2550″ #ad - Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Spiral flutes for creating threads in blind holes. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. Gold oxide finish reduces grinding stress within the tool. Spiral flute tap pulls chips back from the tip of the tool and out of the hole to prevent clogging.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.