#ad
PEM ENGINEERING / CAPTIVE FASTENERS S-256-1ZI 2-56 SELF CLINCHING NUT (QTY 100)
#ad - 2-56 self clinching nut z/p. S-256-1zi. Zinc plated. Pem engineering / captive fasteners.
#ad
LASCO 03-3507 1-1/2-Inch Chrome Plated Brass 22 Gauge Captive Nut J-Bend by LASCO
#ad - Chrome plated22 gauge metal tubulardrain connection includes everything needed to install j-bend pipingcommonly used with kitchen, laundry, or bathroom sinksfor use as lavatory/kitchen drain pip with j-bend, intended for connection to 1-1/2-inch cast elbow.
#ad
UNICORP CLS-632-1U Round Captive Nut Self-Clinching, 6-32 Thd x .040 thk, Stainless QTY-100
#ad - They are used to provide load-bearing threads in stainless steel panels with a minimum sheet thickness of. 030 inches. Unicorp’s self-clinching nuts are installed quickly and easily.
#ad
M5 Cage Nut,Steel,Nickel Plating,Pack of 50-piece,M5 Captive Nut
#ad - . A cage nut consists of a square nut in a spring steel cage which wraps around the nut. The cage nut useally used to install equipment rack. Cage nut also called captive or clip nut.
#ad
Leviton 23550-NW Fluorescent Lampholder for T8 T12 HO Slide-On Pedestal Shallow Base Plunger Captive Nut Internal Shunt – White (Pkg of 10)
#ad - For use as lavatory/kitchen drain pip with j-bend, intended for connection to 1-1/2-inch cast elbow. Drain connection includes everything needed to install j-bend piping. Chrome plated. 22 gauge metal tubular. Commonly used with kitchen, laundry, or bathroom sinks.
#ad
Titanium Swingarm Captive Nut Right Side R1 Purple Haze
#ad - This part replaces the cut out nut and washer on the rh side of the swingarm pivot. Titanium swingarm captive nut right side r1 07-08. Swingarm pivot captive nut with integral washer. Yamaha original part nutbers for the parts 4c8-22252-00-00 nut 45 90201-30016-00 washer,plate please note the colour finish on titanium is not identical to our aluminium range.
#ad
LASCO 03-4263 White Plastic Tubular 1-1/2-Inch Slip Joint One End X Captive Nut 90-Degree Elbow with Nuts and Washers
#ad - For use as lavatory/kitchen drain elbow, with 90-degree angled unit. Commonly used with kitchen, laundry, or bathroom sinks. The product is 1-1/2″ od 90 degree slip joint x reverse nut with nuts and washers included, white. The product is manufactured in china. Reverse nut x slip joint connection assembly, includes 2 nuts and washers. Easy and simple use kit. White plastic construction. 1-1/2-inch outside diameter.
#ad
Leviton 23550-NW Fluorescent Lampholder for T8 T12 HO Slide-On Pedestal Shallow Base Plunger Captive Nut Internal Shunt – White
#ad - Tough, rugged, sturdy & made in the usa w/lifetime warranty. Hardened steel / color/black oxide finish. Thread size 12-24, width 052, depth 036″, height 05″ panel 105. Rohs compliant / snap-in design. What’s included qty 50, 12-24 cage nuts.
#ad
PEM ENGINEERING / CAPTIVE FASTENER SS-M4-2ZI 4 mm METRIC SELF CLINCHING NUT (QTY 100)
#ad - Pem engineering / captive fasteners. 4mm metric self clinching nut. S-m4-2zi. Zinc plated.
#ad
Leviton 13551-NW Fluorescent Lampholder for T8 T12 HO Slide-On Pedestal Shallow Base Stationary Captive Nut – White (Pkg of 4)
#ad - New design thermoplastic medium fluorescent lampholder 660w-600v, slide-on, shallow base for t-8 and t-12 lamps, recessed double contact, pedastal type, with fixed end. For 20 guage panel thickness, non-shunted, white. Quickwire terminals, horizontal contacts.
#ad
UNICORP S-632-1U Round Captive Nut Self-Clinching, 6-32 Thread x .040 thk, Steel Zinc QTY-100
#ad - They are used to provide load-bearing threads in stainless steel panels with a minimum sheet thickness of. 030 inches. Unicorp’s self-clinching captive nuts are installed quickly and easily.
#ad
UNICORP S-440-2U Round Captive Nut Self-Clinching, 4-40 Thread x .056 thk, Steel Zinc QTY-100
#ad - Unicorp’s self-clinching captive nuts are installed quickly and easily. They are used to provide load-bearing threads in stainless steel panels with a minimum sheet thickness of. 030 inches.
#ad
UNICORP F-440-1U Hex Captive Nut Self-Clinching, 4-40 Thd x .060 thk, Stainless QTY-50
#ad - 060 inches. . Unicorp’s self-clinching flush mount nuts are installed quickly and easily. They are used to provide load-bearing threads in panels with a minimum sheet thickness of.
#ad
Leviton 13451-NX Medium Base, T8 OnlyBi-Pin, Standard Fluorescent Lampholder, Low Profile, Screw Mount, Straight-In Double Edge, Quick-Connect 18AWG Solid or Str. Tinned, White Captive Nut and Screw
#ad - . Leviton’s line of fluorescent lampholders provides everythig you need for replacement and creating fluorescent lighting applications. From commercial to residential, levitons line of fluorescent lampholders are made of top quality materials that last.
#ad
Leviton 13550-NW Fluorescent Lampholder for T8 T12 HO Slide-On Pedestal Shallow Base Plunger Captive Nut – White (Pkg of 10)
#ad - What’s included qty 50, 10-32 cage nuts. Rohs compliant / snap-in design. Tough, rugged, sturdy & made in the usa w/ lifetime warranty. Thread size 10-32, width 052″, depth 036″, height 05″. Hardened steel / color/black finish.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
