Coolest 19 Lmt Onsruds in 2019

 

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 01250 Shank Diameter #ad

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter #ad - Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle.

 

LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 63-776 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 63-776 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-776 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle.

 

LMT Onsrud 52-703 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 2 Flutes 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 52-703 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 52-703 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Double flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter #ad

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 57-285 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 25000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 57-285 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 57-285 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 66-912ALTIN High Performance Composite Router with Drill Point AlTiN Finish 1 Cutting Length 14 Cutting Diameter 14 Shank Diameter 3 Overall Length Pack of 1 #ad

LMT Onsrud 66-912ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1″ Cutting Length, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 3″ Overall Length (Pack of 1)

LMT Onsrud 66-912ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1″ Cutting Length, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 3″ Overall Length (Pack of 1) #ad - The new high performance composite router is a true cutting tool. Deep cutting flutes increase the chip flow and aids in dissipating heat resulting in longer tool life. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. It cuts the material into distinct chips which remove heat from the cut. The new high performance composite router is designed for more efficient routing of composite materials, in both hand-fed and in cnc applications.

 

LMT Onsrud 63-760 Solid Carbide Upcut Spiral O Flute Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 01250 Shank Diameter #ad

LMT Onsrud 63-760 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-760 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 62-775 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 25000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-775 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-775 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. One flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. One flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool Inch Uncoated Bright Finish 30 Degree Helix 3 Flutes 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Three flute, 30 degree angle.

 

LMT Onsrud 52-702 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 2 Flutes 40000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 52-702 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 52-702 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 37-21 Solid Carbide Engraving Tool Uncoated Bright Finish 1 Flute 0005 Tip Diameter 30 Degree 14 Shank Diameter 2 Overall Length Pack of 1 #ad

LMT Onsrud 37-21 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)

LMT Onsrud 37-21 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1) #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 30 degree angle. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 67-211 Solid Carbide Upcut Phenolic Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 30000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 67-211 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 67-211 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Three flute, 10 degree angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 45000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Three flute, 10 degree angle. Designed for perfect balance and ultra smooth finish over a wide speed range. Round shanks allow use with a wide variety of toolholding systems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.