Coolest 17 Router Plates in 2020

 

Rockler Router Plate Insert With 1-12 Opening For Standard Plates

Rockler Router Plate Insert With 1-1/2″ Opening For Standard Plates

Rockler Router Plate Insert With 1-1/2″ Opening For Standard Plates - Large 2″ bit hole allows maximum visibility. Lifetime guarantee against defects in material or workmanship made in the usa. Includes mounting screws. Hand held router plate designed for a trim or compact router provides a safe and stable base when routing includes two handles for greater freehand control 1/4″ thick phenolic. Sold on amazon.

 

Rockler Pro Lift Router Lift 8-14 x 11-34 plate

Rockler Pro Lift Router Lift (8-1/4” x 11-3/4” plate)

Rockler Pro Lift Router Lift (8-1/4” x 11-3/4” plate) - Includes one insert ring with a 1-1/2” opening additional inserts and zero clearance insert assembly sold separately. Indexed marks on the fine adjustment screw let you raise the bit by a specific increment with the naked eye. 2018 wood magazine innov8 award winner. 3/8” thick machined aluminum plate and heavy-duty steel constructed guide posts with bronze bushings-designed for demanding daily use. Push the button to release the insert ring for fast bit changes-no tools to search for no screws to lose.

 

EEmerson Tool T23075 Contractor Router Plate by E Emerson Tool Co

E.Emerson Tool T23075 Contractor Router Plate by E. Emerson Tool Co

E.Emerson Tool T23075 Contractor Router Plate by E. Emerson Tool Co - Includes one insert ring with a 1-1/2” opening additional inserts and zero clearance insert assembly sold separately. Indexed marks on the fine adjustment screw let you raise the bit by a specific increment with the naked eye. Push the button to release the insert ring for fast bit changes-no tools to search for no screws to lose. 2018 wood magazine innov8 award winner. 3/8” thick machined aluminum plate and heavy-duty steel constructed guide posts with bronze bushings-designed for demanding daily use.

 

DCT Universal 65in Acrylic Router Table Base Plate Mount for Porter-Cable Ryobi Bosch Makita Hitachi Dewalt

DCT Universal 6.5in Acrylic Router Table Base Plate Mount for Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt

DCT Universal 6.5in Acrylic Router Table Base Plate Mount for Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt - Contents package includes (1) base plate, (1) alignment pin, (12) machine screws, and installation instructions for your convenience bushings, collect, and router not included. Make routing enjoyable use the dct universal 65″ inches acrylic router table base plate mount for porter-cable, ryobi, bosch, makita, hitachi, dewalt to enhance your visibility and increase the stability of your router while accepting porter-cable style guide bushings to complete woodworking projects such as dovetailed drawers and more. Increase visibility the transparent base is a plus when routing freehand as you can easily see the woodwork/lines for simple inlay it is clear to show the bit contacting the material instead of working entirely by feel built to last with extra thick acrylic with 65-inch diameter and 5/8-inch thickness acrylic material is durable but can be drilled to fit any scenario centering pin constructed from brass for strength and longevity. Easy installation mounting instructions included install and tighten porter-cable style guide bushing (not included), align 1/4-inch collect (not included) and plate on router, install included screws, insert included alignment guide pin in collet to tighten (for setting a template guide centered on router collect) pre-drilled and includes screws for different routers 1-3/16-inch main hole inner diameter with 1-3/8-inch surrounding stepped diameter that creates a pocket for standard bushing. Use your router compatible router model numbers included porter-cable (690 series, 7529, 8529) ryobi (most models) bosch (1615, 1617, 1618) makita (most models) sears (315 275 000, 315 175 040, 315 175 050, 315 175 060, 315 175 070, 315 275 100, 315 275 110) fein (ft 1800) milwaukee (5615, 5616, 5619) freud (ft2000e) hitachi, (m8v, tr12, m12v) elu (177) dewalt (621, 625, 616 series, 618 series).

 

Bench Dog Aluminum Router Plate D

Bench Dog Aluminum Router Plate D

Bench Dog Aluminum Router Plate D - Router plate tracks along the all-in-one straight edge clamping tool guide eliminating router kick for a smooth cut. Router plate rail fits over raised t-track on the a, twin, and ultra series clamps. Predrilled with a variety of hole patterns to accommodate most routers. Fits routers with up to a 6” diameter base.

 

Rockler Phenolic Router Plate B

Rockler Phenolic Router Plate B

Rockler Phenolic Router Plate B - Two additional tab-loc insert rings to reduce the size of the bit opening. Simple step-by-step instructions make accurately drilling and mounting any router easy. Convenient center-hole bushing used to align the router so it is centered in the bit hole. Plate center-hole is machined to accept a 3-1/2″ raised panel bit. 3/8″ thick phenolic with durable friction-free coating.

 

MuscleChuck Quick Router Bit Change T1 Extended for B&D and PC Router Plate Use

MuscleChuck Quick Router Bit Change T1 Extended for B&D and PC Router Plate Use

MuscleChuck Quick Router Bit Change T1 Extended for B&D and PC Router Plate Use - This american made chuck comes in many versions to fit most routers please refure to the accompanying chart to see which type is approparate for your router. The extra reach afforded by the musclechuck allows you to perform above-table router bit changes in seconds. Musclechuck threads directly onto your router’s existing spindle and accepts 1/2″ shanks out of the box collet are also available for 3/8″, 1/4″, 1/8″, 6mm, 8mm and 12mm shank bits. Ideal for table- or cnc-mounted routers. Just a half-turn of a hex wrench, router bits pop in and out with absolute ease.

 

Rockler Router Plate Insert With 2-12 Opening For Standard Plates

Rockler Router Plate Insert With 2-1/2″ Opening For Standard Plates

Rockler Router Plate Insert With 2-1/2″ Opening For Standard Plates - This clearance is enough to allow for air flow as well as stock support while routing. Sold on amazon. Each ring is molded of abs reinforced with polycarbonate. Includes a blank ring which can be drilled or routed for a custom size. For ideal stock support, it’s recommended that the router bit opening be approximately 1/8″ to -1/4″ larger than the bit diameter. This set of eight is in addition to the standard three rings supplied with each woodpeckers router mounting plate and router lift. Set includes solid, 3/4-inch, 7/8-inch, 1-3/8-inch, 1-5/8-inch, 1-7/8-inch, 2-1/8-inch, and 2-3/8-inch.

 

MLCS 9334 14-Inch Thick Aluminum Router Plate

MLCS 9334 1/4-Inch Thick Aluminum Router Plate

MLCS 9334 1/4-Inch Thick Aluminum Router Plate - 3 removable rings allow 4 opening sizes up to 3-1/4-inch. Pre-marked for mounting popular routers (not pre-drilled). Sturdy and strong 1/4-inch thick aluminum. Leveling screws and magnets included to secure in place. Supports the heaviest routers without sag.

 

Taytools 300003 Router Bit Template Guide Base Plate Centering Tool for 14 and 12 Collets HSS

Taytools 300003 Router Bit Template Guide Base Plate Centering Tool for 1/4″ and 1/2″ Collets HSS

Taytools 300003 Router Bit Template Guide Base Plate Centering Tool for 1/4″ and 1/2″ Collets HSS - This router bit centering pin has multiple uses in the woodshop. It can be used to center template guides to router base plates, align router base plates in both hand-held and router tables, set up router bits for slots or dados and check router collets for run out. Precision machined from high speed steel. 3 inch overall length. Fits both 1/4 inch and 1/2 inch router collets.

 

Aluminum Router Table Insert Plate the Trim Panel for Woodworking Benches with 4 Rings Screws

Aluminum Router Table Insert Plate the Trim Panel for Woodworking Benches with 4 Rings, Screws

Aluminum Router Table Insert Plate the Trim Panel for Woodworking Benches with 4 Rings, Screws - Strong, stiff and smooth made from cast, precision machined aluminum. Easy, exact leveling getting this plate exactly level is easy thanks to 8 top accessible fine-pitch leveling set screws. ✔Simple operation woodworking accessories trimming board multi-functional floor, easy and accurate drilling and installation of any router (except the special types). A pair of adjustable edge plungers enable you to eliminate any slop between the router plate and the plate opening. Multiple starting pin locations and 3 twist-lock rings and a locking wrench included with each router plate.

 

Aluminum Universal Router Plate with Replacement Screws and Plastic Insert Rings

Aluminum Universal Router Plate with Replacement Screws and Plastic Insert Rings

Aluminum Universal Router Plate with Replacement Screws and Plastic Insert Rings - Will fit porter cable, 100, 690, 890, 7529, 8529 series. Snap-in rings are interchangeable for easy transitions between multiple router applications. Bosch- 1617, 1618, 1619, and 1619 evs routers. Dewalt, dw625, dw616, dw18 series makita, 1100 series hitachi- mv12vc series. 6-1/2″ x 1/4″ thick aluminum plate with 2 easy to snap insert rings.

 

DCT Brass Router Template Guides Bushing 8-Piece Set 2 BONUS Lock Nuts - Porter-Cable Guide Bushings 516 to 1in

DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16 to 1in

DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16 to 1in - Common sizes standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches) fits 1/4-inch and thinner template material each of the 8 guides have the following outside and inside diameters (od/id), 5/16-inch od 1/4-inch id 3/8-inch od 9/32-inch id 7/16-inch od 11/32-inch id 1/2-inch od 13/32-inch id 5/8-inch od 17/32-inch id 3/4-inch od 21/32-inch id 51/64-inch od 5/8-inch id 1-inch od 7/8-inch id. Contents package includes (8) guides + (2) lock nuts + (1) carrying case for your convenience. Perfectly matched multiples the dct brass router template guides bushing 8-piece set & 2 bonus lock nuts, porter-cable guide bushings 5/16″ to 1″ inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates fits router with template guide adapter. Easy storage heavy-duty 85″ x 2″ x 65″ (216cm x 51cm x 165cm) plastic blow-molded carrying case for easy transportation, safe storage, and simple organization each compartment has a sizing label for quick identification. Improved construction constructed from solid brass to resist vibrating loose and resist water and moisture when inferior steel bushings touch a rotating router bit (ie tapered dovetail bit), sparks fly and the router bit will likely be ruined these solid brass bushings will prevent damage to the bit and the bushings themselves.

 

Bench Dog Aluminum Router Plate C

Bench Dog Aluminum Router Plate C

Bench Dog Aluminum Router Plate C - 88 pounds product. Dimensions 925 x 1175 x 101 inches. This model is designed for use with pc 690/890, bosch 1617/1618, dewalt 610/618/616, craftsman 1754/17540/28190.

 

Cnc Milling Z-Axis Tool Setting Touch Plate Probe Mach3 Router Milling Cnc Engraving Machine Auto-Check Instrument Setting Probe

Cnc Milling Z-Axis Tool Setting Touch Plate Probe Mach3 Router Milling Cnc Engraving Machine Auto-Check Instrument Setting Probe

Cnc Milling Z-Axis Tool Setting Touch Plate Probe Mach3 Router Milling Cnc Engraving Machine Auto-Check Instrument Setting Probe - Milling tools cnc z-axis tool setting touch plate probe mach3 router mill. Cnc z axis router mill touch plate mach3 tool setting probe new milling hot kit. Effective surface diameter 30mm. Cnc router mill z-axis tool setting touch plate works w/ mach3.

 

Rockler Phenolic Router Plate C

Rockler Phenolic Router Plate C

Rockler Phenolic Router Plate C - Bosch- 1617, 1618, 1619, and 1619 evs routers. Snap-in rings are interchangeable for easy transitions between multiple router applications. Dewalt, dw625, dw616, dw18 series makita, 1100 series hitachi- mv12vc series. 6-1/2″ x 1/4″ thick aluminum plate with 2 easy to snap insert rings. Will fit porter cable, 100, 690, 890, 7529, 8529 series.

 

KREG Molded Router Table Insert Plate Blank for All Routers

KREG Molded Router Table Insert Plate Blank, for All Routers

KREG Molded Router Table Insert Plate Blank, for All Routers - Includes removable brass starting pin, level-loc wrench and detailed instructions. Level-loc reducing rings provide three bit opening sizes of 1″, 1-3⁄16″ and 2-5⁄8″. 3⁄8″-thick compression-molded phenolic plate provides a flat plate surface that won’t sag. Alignment marks on undrilled version provide easy router mounting. 9-1⁄4″ x 11-3⁄4″ size accommodates large routers easily.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.