Coolest 12 Reduced Shanks

 

Chicago Latrobe 190C-TN Cobalt Steel Reduced-Shank Drill Bit TiN Coated Round Shank 118 Degree Split Point 916 Size

Chicago Latrobe 190C-TN Cobalt Steel Reduced-Shank Drill Bit, TiN Coated, Round Shank, 118 Degree Split Point, 9/16″ Size

Chicago Latrobe 190C-TN Cobalt Steel Reduced-Shank Drill Bit, TiN Coated, Round Shank, 118 Degree Split Point, 9/16″ Size - Features 6″ overall length and 3 1/8″ flute length for increased rigidity, less deflection, and better hole accuracy. Titanium nitride (tin) coating adds lubricity and hardness, enhancing chip flow, finish hole quality, and drill life. Larger size general-purpose drills with 1/2″ reduced shank. Manufactured from cobalt premium highspeed steel for use in highly abrasive applications also 118 degree split point for easier, more precise penetration. Standardized lengths result in minimal adjustment during tool changes in screw machines and machining centers and increased rigidity is ideal for portable drilling.

 

Irwin Tools 3016032 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank 12 x 6

Irwin Tools 3016032 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank, 1/2″ x 6″

Irwin Tools 3016032 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank, 1/2″ x 6″ - Made from industrial grade high-speed steel for increased durability 8% cobalt alloy is heat and abrasion-resistant. Bit has a straight shank. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel.

 

Irwin Tools 3016028 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank 716 x 5-12

Irwin Tools 3016028 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank, 7/16″ x 5-1/2″

Irwin Tools 3016028 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank, 7/16″ x 5-1/2″ - 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. Made from industrial grade high-speed steel for increased durability 8% cobalt alloy is heat and abrasion-resistant. Bit has a straight shank.

 

200mm Metric Drill Bits 12 Shank High Speed Steel Reduced Shank Drill HSS

20.0mm Metric Drill Bits 1/2″ Shank High Speed Steel Reduced Shank Drill HSS

20.0mm Metric Drill Bits 1/2″ Shank High Speed Steel Reduced Shank Drill HSS - Surface treated flutes. 118 degree point. 1/2″ reduced shank. High speed steel. 6″ oal with 3″ flute.

 

IVY Classic 01125 2564-Inch M2 High Speed Steel Drill Bit 118-Degree Point Reduced Shank 1Card

IVY Classic 01125 25/64-Inch M2 High Speed Steel Drill Bit, 118-Degree Point, Reduced Shank, 1/Card

IVY Classic 01125 25/64-Inch M2 High Speed Steel Drill Bit, 118-Degree Point, Reduced Shank, 1/Card - Hardened and tempered high speed steel. Precision ground, bright finish with polished flutes that increase chip ejection. Jobber length drill bits for steel, wood and plastic, premium swift bore (registered trademark). Diameter 25/64-inch, overall length 5-1/8-inch, shank 3/8-inch reduced shank. General purpose 118-degree standard point for easy drilling.

 

Goplus 12 - 1 8pc Reduced Shank Drill Bit Set Silver Deming Large Heat Treated New

Goplus® 1/2″ – 1″ 8pc Reduced Shank Drill Bit Set Silver & Deming Large Heat Treated New

Goplus® 1/2″ – 1″ 8pc Reduced Shank Drill Bit Set Silver & Deming Large Heat Treated New - It has 8 drill bits in different size. This bit set has heat treated for added durability. . The drill bits come in a fitted wooden storage box to keep them organized and ready to access for any project. This 8pc drill bit set with high quality is useful for work and household.

 

Drill America KFDRSD Series Killer Force High-Speed Steel Reduced-Shank Drill Bit BlackGold Oxide Finish Round with 3-Flats Shank Spiral Flute 135 Degrees Split Point 1 Size Pack of 1

Drill America KFDRSD Series Killer Force High-Speed Steel Reduced-Shank Drill Bit, Black/Gold Oxide Finish, Round with 3-Flats Shank, Spiral Flute, 135 Degrees Split Point, 1″ Size (Pack of 1)

Drill America KFDRSD Series Killer Force High-Speed Steel Reduced-Shank Drill Bit, Black/Gold Oxide Finish, Round with 3-Flats Shank, Spiral Flute, 135 Degrees Split Point, 1″ Size (Pack of 1) - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. Ideal for drilling in low and medium tensile strength materials. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Huot Three-Drawer 12 Reduced Shank Drill Bit Dispenser Cabinet

Huot Three-Drawer 1/2″ Reduced Shank Drill Bit Dispenser Cabinet

Huot Three-Drawer 1/2″ Reduced Shank Drill Bit Dispenser Cabinet - Unit can be stacked with other huot dispenser cabinets. Made of steel with an epoxy finish for durability and protection. Three-drawer cabinet holds two each of 1/2″ reduced shank drill bits in fractional sizes from 1″ to 1-1/2″. Labeled compartments for identification and organization. Made in usa.

 

Cle-Line 1874 Multi Stepped Drill High Speed Steel Bright Finish Reduced Shank 118° Split Point 14 to 34 x 116 Pack of 1

Cle-Line 1874 Multi Stepped Drill, High Speed Steel, Bright Finish, Reduced Shank, 118° Split Point, 1/4″ to 3/4″ x 1/16″ (Pack of 1)

Cle-Line 1874 Multi Stepped Drill, High Speed Steel, Bright Finish, Reduced Shank, 118° Split Point, 1/4″ to 3/4″ x 1/16″ (Pack of 1) - Step standard. Cle-line 1874 step specialty drill, high speed steel, bright finish, reduced shank, 118° split point, wire size (pack of 1). . 118 degree split point for faster, easier drill penetration.

 

T20 Torx -2 Precision Cut Power Bit- 10 Pack with Case - Impact Rated - Reduced Shank

T20 Torx -2″ Precision Cut Power Bit- 10 Pack with Case – Impact Rated – Reduced Shank

T20 Torx -2″ Precision Cut Power Bit- 10 Pack with Case – Impact Rated – Reduced Shank - Manufactured to asme b107 standards. Cnc cut for high torque impact applications. Free shipping same day on all orders in by 300 pm, no minimum. Hch through-hardened tempering process. Impact rated for cordless electric drills, premium s2-1mod3 steel.

 

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit Black Oxide Finish Flatted Shank 118 Degree Conventional Point 1-332 Size

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit, Black Oxide Finish, Flatted Shank, 118 Degree Conventional Point, 1-3/32″ Size

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit, Black Oxide Finish, Flatted Shank, 118 Degree Conventional Point, 1-3/32″ Size - Black oxide finish for increased wear resistance and added lubricity standard from stock. Increased rigidity is ideal for portable drilling. Larger size general-purpose drills with 1/2″ reduced shank. Features 6″ overall length and 3 1/8″ flute length for increased rigidity, less deflection, and better hole accuracy. Standardized lengths result in minimal adjustment during tool changes in screw machines and machining centers.

 

Drillco 1000EC Series Cobalt Steel Reduced-Shank Drill Bit Bronze Finish Round Shank with Flats Spiral Flute 135 Degree Split Point 1 Size

Drillco 1000EC Series Cobalt Steel Reduced-Shank Drill Bit, Bronze Finish, Round Shank with Flats, Spiral Flute, 135 Degree Split Point, 1″ Size

Drillco 1000EC Series Cobalt Steel Reduced-Shank Drill Bit, Bronze Finish, Round Shank with Flats, Spiral Flute, 135 Degree Split Point, 1″ Size - Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging. Reduced shank drill bit has a shank that is smaller in diameter than its shaft, permitting drilling with a 1/2″ drill chuck. Bronze finish lubricates the drill bit and provides wear resistance. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials. Designed for drilling tough, high-tensile strength materials.