Best Psi Woodworking out of top 24 in 2020

 

PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center 2MT #ad

PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT

PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT #ad - Spring-loaded center point retracts when tailstock pressure is applied. Spring-loaded center point simplifies positioning of your spindle. 1″ diameter with #2mt. Sharp spurs give a strong bite into wood work piece. Spring-loaded center point helps avoid splitting your work piece.

 

PSI Woodworking PENPRESSXL Assembly Disassembly Pen Press #ad

PSI Woodworking PENPRESSXL Assembly & Disassembly Pen Press

PSI Woodworking PENPRESSXL Assembly & Disassembly Pen Press #ad - Assemble and disassemble pen parts on one easy to use tool acts as traditional pen press to press your pen parts together disassembly function provides invaluable way to take virtually any pen apart. The (6) disassembly rods handle nearly all tube diameters and parts configurations including pen tips and clips dedicated 7mm bushing allows for disassembly of any 7mm pen soft-grip tube and v-profile clamp provides parts protection during disassembly process. Provides 250 lbs of pressure spring-loaded ram acts as a 3rd hand for quick and easy parts positioning sled mechanism slides the stop into position locking lever then securely locks the rod in place. Included components press assembly with adjustment sled and handle, (6) disassembly rods, spring-loaded stopper, 6″ of soft-grip tubing, 7mm mechanism bushing for parts protection.

 

PSI Woodworking CJAM10C Expanding Jam Chuck Set 5 Piece #ad

PSI Woodworking CJAM10C Expanding Jam Chuck Set, 5 Piece

PSI Woodworking CJAM10C Expanding Jam Chuck Set, 5 Piece #ad - Works perfect with cjam10f 5-piece forstner bit set to drill out jam chuck holes. Ideal solution for securing small turning projects with hollow centers. Chuck expands by turning nut to secure work piece. Chuck sizes 3/4″, 1″, 1-1/4″, 1-1/2″, 2″. 1-1/4″ long with 1/4″ shank.

 

PSI Woodworking PKMJAM Mandrel Jam Chuck System with No2 Morse Taper #ad

PSI Woodworking PKMJAM Mandrel Jam Chuck System with No.2 Morse Taper

PSI Woodworking PKMJAM Mandrel Jam Chuck System with No.2 Morse Taper #ad - Ideal for turning peppermill blanks, kaleidoscope blanks, and any other project blank that has a completely drilled-thru hole of 1″, 1-1/2″, or 2″. Use for mounting and fastening wooden spindles for turning the outer surfaces. The system holds a spindle up to 7″ long. For support, lock the tailstock in place with a 60 degree live center. Includes (1)9″ threaded mandrel shaft 3/8″x16tpi , (1)#2mt arbor, (3)sets jam chuck wheels 1″,1-1/2″,2″ diameter, (3)sets washers, (6)lock nuts 3/8″x16tpi, (1)tightening wrench, (4)spacer bushings.

 

PSI Woodworking PKM-CL Slip-On Pen Mandrel for 58 Lathe Spindle #ad

PSI Woodworking PKM-CL Slip-On Pen Mandrel for 5/8″ Lathe Spindle,

PSI Woodworking PKM-CL Slip-On Pen Mandrel for 5/8″ Lathe Spindle, #ad - Replacement shafts (xpkm-elc2) are available from penn state industries. Psi woodworking mandrel savers (pkmsts1 & pkmsts2) are compatible with this shaft. 244″ od). Pkm-cl is a slip-on pen mandrel for a 5/8″ lathe headstock spindle. 7mm mandrel shaft (. Psi woodworking has many other mandrels available to meet your specific turning needs pkms2set, pkms1set, pkm-elc, pkm-flc, pkm-fsm, pkmsman1, pkmsman2, pkm-al, pkm-bl, pkmbcm1, pkmbcm2, pkmbcm3. Also includes (7) 7mm bushings, (1) knurled nut, (1) 7mm brad point drill bit, and (1) allen wrench for the set screw to lock on the spindle. For shop smith lathes.

 

PSI Woodworking PKDISET Pen Kit Disassembly Punch Set #ad

PSI Woodworking PKDISET Pen Kit Disassembly Punch Set

PSI Woodworking PKDISET Pen Kit Disassembly Punch Set #ad - Rods are 4-7/8″ (125mm) long and made of hardened alloy steel with a black oxide finish. Includes (28) rods from 3/32″ to 17/32″ in diameter. Disassembles nearly all pen and pencil kits with tubes and components of any size. For easiest and best results, use with our locking soft-grip pliers for pen disassembly (pkdisgrip). Salvage your pen parts, replace components, exchange components, and help avoid buying new pen parts.

 

PSI Woodworking LIXU Universal Lathe Indexing Attachment #ad

PSI Woodworking LIXU Universal Lathe Indexing Attachment

PSI Woodworking LIXU Universal Lathe Indexing Attachment #ad - Lathe compatibility split bed, 1″ x 8tpi headstock spindle thread, swing range of 10″ to 16″. Lathe not included. Indexing wheel is 1/2″ in depth and 3″ in diameter. Add the benefit of indexing to your lathe with this handy attachment. 24 indexing positions to add uniform decoration and fluting segments to your turnings.

 

PSI Woodworking LCENTLT1 1MT Heavy Duty Live Tailstock Center #ad

PSI Woodworking LCENTLT1 1MT Heavy Duty Live Tailstock Center

PSI Woodworking LCENTLT1 1MT Heavy Duty Live Tailstock Center #ad - Heavy duty #1mt live tailstock center with a 60 degree point. Well balanced and runs true for smooth, effective turning. Ideal to support your work at the tailstock end of your lathe. Cone is 2″ long by 1-1/4″ diameter. Precision ball bearings.

 

PSI Woodworking Products TM32 12-Inch Drill Chuck with 2 Morse Taper Arbor 12 2MT #ad

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2″ 2MT)

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2″ 2MT) #ad - Includes the 1/2″ drill chuck, #2 morse taper arbor, and jaw tightening key. This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2mt accessories. The #2mt arbor accepts 1/4″ x 20tpi draw bolt draw bolt not included. Removes easily with knock out bar. Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.

 

PSI Woodworking PKSPSET5 Penturners 5-Roll Multi Pack Sanding Set #ad

PSI Woodworking PKSPSET5 Penturner’s 5-Roll Multi Pack Sanding Set

PSI Woodworking PKSPSET5 Penturner’s 5-Roll Multi Pack Sanding Set #ad - Includes (5) different grits 150x, 240x, 320x, 400x, & 600x. Each roll is 1″ wide x 20′ long. J-weight cloth backed sandpaper rolls. Conveniently finish your pens in five graduated sanding steps with this handy dispenser. Can also be used for other small turning projects.

 

PSI Woodworking LCGRIND4 Complete 4-Piece Precision Lathe Chisel Sharpening System #ad

PSI Woodworking LCGRIND4 Complete 4-Piece Precision Lathe Chisel Sharpening System

PSI Woodworking LCGRIND4 Complete 4-Piece Precision Lathe Chisel Sharpening System #ad - Includes finger nail jig, for finger nail profiles on shallow gouges, or deep fluted bowl gouges. Includes skew grinding attachment to assist in grinding precision bevels on any skew chisel. Bench grinder not included this sharpening system includes everything you need to grind perfect edges on wood lathe chisels simplifies the task of honing complex tool profiles duplicate angles, sharp edges, and smooth bevels. Includes adjustable ‘v’ pocket jig to hold chisels up to 22″ in overall length. Includes grinding platform for general purpose grinding.

 

PSI Woodworking CLTEZSETC EZ-Glide Bowl Turners 4Piece Toolrest Set #ad

PSI Woodworking CLTEZSETC EZ-Glide Bowl Turner’s 4Piece Toolrest Set

PSI Woodworking CLTEZSETC EZ-Glide Bowl Turner’s 4Piece Toolrest Set #ad - Ultra smooth, round hardened steel rod top will let you effortlessly glide your lathe tool for superior results. Upper support rod will not nick or scratch. See manufacturer’s description below for tool rest measurements. Post on all 4 tool rest is 5/8″ diameter. Use for bowl exterior, interior hollowing, deep penetration, and sharp corners.

 

PSI Woodworking LCHOLSET HSS Hollowing Tool System 6 Piece #ad

PSI Woodworking LCHOLSET HSS Hollowing Tool System (6 Piece)

PSI Woodworking LCHOLSET HSS Hollowing Tool System (6 Piece) #ad - The (6) 5/16″ thick cutters handle multiple interior profiling requirements. Overall tool length is 185″ long with 12″ handle and 65″ blade. (6) cutter profiles 5/8″ round, 1/2″ round, mushroom, nose, angle tip, rounded side. This complete hollowing set system will make your hollowing experiences easy, effective, and affordable. Complete system includes handle and blade, (6) interchangeable hss cutters, hardened set screw, allen wrench.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System #ad

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System #ad - Includes (1) barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) allen wrench, (8) screws, (1) storage case. With the variety of included jaws, the csc3000c will mount most turning projects onto your lathe including bowls, spindles, pens, other small turning projects, and much more. #1 step jaws 3/32″ to 1-3/8″ & 11/16″ to 2-3/8″ #2 round jaws 7/8″ to 1-1/2″ &1-1/4″ to 2″ #3 wide bowl jaws 3-1/16″ to 4-3/8″ pin jaws 1″ to 2-1/4″. This is a c-series chuck compatible with all additional c-series jaws and accessories 7-3/4″ jumbo flat jaws (cjawfj2), 5″ small flat jaws (cjawfj1), set of 2 alligator jaws (lcaljaws), pen blank drilling jaws (cjawpen), 8-1/4″ super finishing jaws (cjawxl), and more. Barracuda2 chuck body is 3 5″ diameter and weighs 4 lbs pre-threaded to 1″ x 8tpi and includes 3/4″ x 16tpi spindle adapter.

 

PSI Woodworking LCSIDE2 Round Side Scraper Chisels 2-Piece Set #ad

PSI Woodworking LCSIDE2 Round Side Scraper Chisels, 2-Piece Set

PSI Woodworking LCSIDE2 Round Side Scraper Chisels, 2-Piece Set #ad - Small scraper 16-inch blade is 6-inch by 3/4-inch by 5/16-inch thick. Large scraper 19-inch blade is 6-inch by 1-inch by 3/8-inch thick. Eliminates vibration. Final cuts the inside surface of bowls to be clean and smooth. Blades are m2 high speed steel.

 

PSI Woodworking PKBSYST Bottle Stopper Chuck System #ad

PSI Woodworking PKBSYST Bottle Stopper Chuck System

PSI Woodworking PKBSYST Bottle Stopper Chuck System #ad - Tap set bstapset2 3/8″ x 16tpi drill bit 5/16″. Bottle stopper chuck pk-bs1-mj is pre-threaded to mount on 1″ x 8tpi lathe headstock spindle chuck post is 3/8″ x 16tpi. Consists of (1) bottle stopper chuck, (1) tap set, and (1) drill bit. With this system, making a bottle stopper is now as easy as drill blank, tap blank, mount chuck on lathe, mount blank on chuck, and start turning.

 

PSI Woodworking Long Ranger -III Remote #ad

PSI Woodworking Long Ranger -III Remote

PSI Woodworking Long Ranger -III Remote #ad - Extra remote handpiece for long ranger 3. Turn on a dust collector from anywhere in the shop. Uses rf signal. Programmable. Grounded with reset button.

 

PSI Woodworking LCENT4 4Piece Wood Lathe Center Set For 2MT #ad

PSI Woodworking LCENT4 4Piece Wood Lathe Center Set For #2MT

PSI Woodworking LCENT4 4Piece Wood Lathe Center Set For #2MT #ad - Packaged in wooden box. Live ball bearing tailstock center with cup and point. 4-piece center set contains replacement centers for wood lathes equipped with a #2 morse taper headstock and tailstock. 5/8″ diameter headstock spur center for narrow spindles. 1″ diameter headstock spur center for standard spindles.

 

PSI Woodworking CRJA Flat Jaw Extension System #ad

PSI Woodworking CRJA Flat Jaw Extension System

PSI Woodworking CRJA Flat Jaw Extension System #ad - Expand the bowl holding capacity of your chuck to 14″. Compatible with psi 8″ flat jaws(cjawfj2) or psi dedicated bowl chuck(lcjc8). Made from durable high-density plastic bandsaw the jaws to any diameter to adapt to the swing of any lathe up to a 14″. Bowl mounting pins not included. Crja includes (4) jaws with pre-drilled mounting holes, (16) mounting screws, (1) allen wrench.

 

PSI Woodworking LLED3 Flexible LED Lamp with Magnetic Base #ad

PSI Woodworking LLED3 Flexible LED Lamp with Magnetic Base

PSI Woodworking LLED3 Flexible LED Lamp with Magnetic Base #ad - 9 watt ultra bright 3-bulb led with 700+ lumens total and 25, 000 hour bulb life. Position your light source conveniently out of the way with our ultra bright led sunlight lamp. Lathe not included. 9′ power chord. Bulb included. 30 inch strong flex-neck and super strong magnetic base. Easy to mount and position for any lathe or workshop setup.

 

PSI Woodworking DBGULP Big Gulp Dust Hood #ad

PSI Woodworking DBGULP Big Gulp Dust Hood

PSI Woodworking DBGULP Big Gulp Dust Hood #ad - Perfect for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods. Weighs 22 pounds. Dust hood with a 13-by-16-inch opening. Lightweight and portable made from tough abs plastic. 4-inch port to connect to any dust collection system.

 

PSI Woodworking LCENTLT1X Live Tailstock Center Cup and Point 1MT #ad

PSI Woodworking LCENTLT1X Live Tailstock Center Cup and Point #1MT

PSI Woodworking LCENTLT1X Live Tailstock Center Cup and Point #1MT #ad - Smooth running ball bearings. #1 morse taper arbor. Shipped in protective case for storage. #1mt live tailstock center with cup and point.

 

PSI Woodworking LSR3 Wood Lathe Steady Rest #ad

PSI Woodworking LSR3 Wood Lathe Steady Rest

PSI Woodworking LSR3 Wood Lathe Steady Rest #ad - Mounts in the channel of any split bed or double rail lathe. Non marring soft wheels. 3-point ball bearing spindle support. Compatible with jet, delta, and turncrafter pro midi lathes with extension beds. Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2″.

 

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck #ad

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck #ad - The chuck body has a 1/2″ x 20tpi threaded post that screws into the adapter. This 3-jaw chuck will mount onto the headstock spindle of any lathe that accepts 1″ x 8tpi threaded accessories. Includes the 1/2″ drill chuck, 1″ x 8tpi threaded adapter, and jaw tightening key. Perfect for lathes that do not have a morse taper mount. Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.