Best and Coolest 22 Walton Tap Extractors

 

Walton Tools 10374 - 38 910Mm 4-Flute Tap Extractor

Walton Tools 10374 – 3/8″ (9/10Mm) 4-Flute Tap Extractor

Walton Tools 10374 – 3/8″ (9/10Mm) 4-Flute Tap Extractor - 3/8″ (9/10mm) 4-flute tap extractor.

 

Walton 30103 10 3 Flute STI Tap Extractor With Square Shank

Walton 30103 #10, 3 Flute STI Tap Extractor With Square Shank

Walton 30103 #10, 3 Flute STI Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For helical coil wire screw thread insert taps.

 

Walton 10084 8 4 Flute Tap Extractor With Square Shank

Walton 10084 #8, 4 Flute Tap Extractor With Square Shank

Walton 10084 #8, 4 Flute Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10103 10 3 Flute Tap Extractor With Square Shank

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10062 6 2 Flute Tap Extractor With Square Shank

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank - 13 piece set contains sizes #4, #5, #6, #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″. Packed in 15-compartment plastic case. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 10254 14 4 Flute Tap Extractor With Square Shank

Walton 10254 1/4″, 4 Flute Tap Extractor With Square Shank

Walton 10254 1/4″, 4 Flute Tap Extractor With Square Shank - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps.

 

Walton Replacement Finger for 4 Flute Tap Extractor 516 Size

Walton Replacement Finger for 4 Flute Tap Extractor, 5/16″ Size

Walton Replacement Finger for 4 Flute Tap Extractor, 5/16″ Size - For removing machine screws and broken hand taps. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Made of hardened steel to help prevent the damage of the workpieces threads. Replacement finger for walton 4 flute, tap extractors.

 

Walton 30253 14 3 Flute STI Tap Extractor With Square Shank

Walton 30253 1/4″, 3 Flute STI Tap Extractor With Square Shank

Walton 30253 1/4″, 3 Flute STI Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For helical coil wire screw thread insert taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 30373 38 3 Flute STI Tap Extractor With Square Shank

Walton 30373 3/8″, 3 Flute STI Tap Extractor With Square Shank

Walton 30373 3/8″, 3 Flute STI Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For helical coil wire screw thread insert taps.

 

Walton 10064 6 4 Flute Tap Extractor With Square Shank

Walton 10064 #6, 4 Flute Tap Extractor With Square Shank

Walton 10064 #6, 4 Flute Tap Extractor With Square Shank - For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10624 58 4 Flute Tap Extractor With Square Shank

Walton 10624 5/8″, 4 Flute Tap Extractor With Square Shank

Walton 10624 5/8″, 4 Flute Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps.

 

Walton 30313 516 3 Flute STI Tap Extractor With Square Shank

Walton 30313 5/16″, 3 Flute STI Tap Extractor With Square Shank

Walton 30313 5/16″, 3 Flute STI Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. For helical coil wire screw thread insert taps.

 

Walton 18002-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18002-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18002-3 6 Piece 3 Flute Tap Extractor Set With Square Shank - Packed in 6-compartment plastic case. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. 6 piece set contains sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 30043 4 3 Flute STI Tap Extractor With Square Shank

Walton 30043 #4, 3 Flute STI Tap Extractor With Square Shank

Walton 30043 #4, 3 Flute STI Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For helical coil wire screw thread insert taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10063 6 3 Flute Tap Extractor With Square Shank

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10082 8 2 Flute Tap Extractor With Square Shank

Walton 10082 #8, 2 Flute Tap Extractor With Square Shank

Walton 10082 #8, 2 Flute Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 30434 716 4 Flute STI Tap Extractor With Square Shank

Walton 30434 7/16″, 4 Flute STI Tap Extractor With Square Shank

Walton 30434 7/16″, 4 Flute STI Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For helical coil wire screw thread insert taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank - Packed in 6-compartment plastic case. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. 11 piece set contains sizes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″, 1″.

 

Walton 20504 12 4 Flute Pipe NPT Tap Extractor With Square Shank

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank - Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. For pipe taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 10284 932 4 Flute Tap Extractor With Square Shank

Walton 10284 9/32″, 4 Flute Tap Extractor With Square Shank

Walton 10284 9/32″, 4 Flute Tap Extractor With Square Shank - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 18015-3 15 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18015-3 15 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18015-3 15 Piece 3 Flute Tap Extractor Set With Square Shank - For removing machine screws and broken hand taps. 15 piece set contains sizes #4, #5, #6, #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″, 1″. Packed in 15-compartment plastic case. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.