Best and Coolest 22 Step Pulleys

 

V-Belt Pulley 6 In OD 58 Bore 4 Step

V-Belt Pulley, 6 In OD, 5/8 Bore, 4 Step

V-Belt Pulley, 6 In OD, 5/8 Bore, 4 Step - 5/8 or 1/2 in. , Fits shaft dia. V-belt pulley, 4 step fixed bore, bore dia. , 4 groove, die cast (zamak #3) material, for use with one 4l or a section v-belt per pair (or set), includes reducer bushing 3- and 4-step die-cast sheavesbore and grooves are machined together to provide high concentricity. Pitch dia. 15″ less than outside dia. Use in pairs (1 inverted), in any combination, for effective speed regulation. Shaft. Is 0. , Outside dia. Zamak/zinc alloy reducer bushing included solid construction. Use only one 4l or a section v-belt per pair (or set). 6, 5, 4, 3 in. Will fit a 5/8″ or 1/2″ dia. 5/8 or 1/2 in.

 

4 Diameter - 4 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

4″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

4″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - 2nd step = 2 5/8″. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 4th step = 4″. 3rd step = 3 3/8″. 1st step = 2″.

 

JET 692187 9 in x 42 in Step Pulley Mill with Newall DP500 DRO

JET 692187 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO

JET 692187 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO - Spindle head is internally cooled. Certified meehanite castings. Precision bored and honed milling head. Large diameter quill is chromed. High precision class 7 spindle bearings.

 

8x36 Step Pulley Milling Machine

8×36 Step Pulley Milling Machine

8×36 Step Pulley Milling Machine - Precision bored and honed milling head high precision spindle bearings over 10″ of front to back ram travel large diameter quill is chromed locks on all movable surfaces hardened and ground precision table head tilts left or right equipped with one-shot lubrication system way covers draw bar tool box and tools.

 

Palmgren 12 16- Speed Bench step pulley drill press

Palmgren 12″ 16- Speed Bench step pulley drill press

Palmgren 12″ 16- Speed Bench step pulley drill press - They have the weight and rigidity to maintain the built-in tight tolerances required for metalworking applications. The oversized, massive drill heads have widely spaced bearing surfaces that provide full quill support throughout its travel. Fully enclosed spindle for accurate drilling operations maximum spindle run out of 00005″. A wider range of operation speeds for drilling both large and small holes.

 

JET 692189 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeed

JET 692189 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeed

JET 692189 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeed - Spindle head is internally cooled. High precision class 7 spindle bearings. Certified meehanite castings. Precision bored and honed milling head. Large diameter quill is chromed.

 

4 Diameter - 4 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress by CONGRESS DRIVES

4 Diameter – 4 Step Pulley 1/2 – 5/8 Fixed Bore – Die Cast by Congress by CONGRESS DRIVES

4 Diameter – 4 Step Pulley 1/2 – 5/8 Fixed Bore – Die Cast by Congress by CONGRESS DRIVES - Arbor length (each side) 8-1/4-inch. Minimum recommended horsepower 1/3 horsepower, drive belt size 4l280, approx shipping weight 30-pound. 4 diameter, 4 step pulley 1/2, 5/8 fixed bore, die cast by congress. Maximum buffing wheel 10-inch. Recommended motor speed 1,725 rpm.

 

Palmgren 20 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press - Digital readout displays spindle depth and spindle rpm. Table can be tilted 45-degree both right and left. 3/4-inch chuck and self-ejecting key are included. Other features include an enclosed ball bearing quill assembly, quick belt change and tension mechanism, positive quick adjust feed depth stop and a 1 1/2 hp, 1725 rpm motor. Work table height is adjustable using rack and pinion mechanism. Work table surface is precision ground and features t-slots for secure, accurate mounting of work piece and also a coolant trough. 16 spindle speeds range from 120 to 3605 rpm for drilling steel, cast iron, aluminum, wood, and plastic. The palmgren 20-inch floor model drill press features a heavy duty cast iron base, column collar, work table, and head.

 

Step Pulley Mill Machine 2 HP 3 PH 230 V

Step Pulley Mill Machine, 2 HP, 3 PH, 230 V

Step Pulley Mill Machine, 2 HP, 3 PH, 230 V - . Three-stage power down feed with auto stop, high precision class 7 spindle bearings and the rugged stability of meehanite castings ensures you get everything you need from the jtm-1 and 2 models. The internally cooled spindle head prevents seizing, and jet precision engineering ensures superior results with all the features you’ve come to expect and is backed by the industry-leading jet two year warranty.

 

Palmgren 20 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press - Precision bored and honed milling head. High precision class 7 spindle bearings. Meehanite casting. Palmgren 20″ 12-speed floor step pulley drill press. Large diameter quill is chromed.

 

Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph

Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph

Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph - Certified meehanite castings. Spindle head is internally cooled. High precision class 7 spindle bearings. 9×42 step pulley milling machine. Large diameter quill is chromed.

 

JET 692199 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill with X- and Y-Axis Powerfeeds

JET 692199 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeeds

JET 692199 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeeds - High precision class 7 spindle bearings. Spindle head is internally cooled. Large diameter quill is chromed. Certified meehanite castings. Precision bored and honed milling head.

 

JET 692192 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill with X- and Y-Axis Powerfeed

JET 692192 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeed

JET 692192 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeed - Large diameter quill is chromed. Precision bored and honed milling head. Certified meehanite castings. High precision class 7 spindle bearings. Spindle head is internally cooled.

 

Palmgren 20 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press - Rack and pinion table raiser easily positions the work piece and fixture at proper height. Fully enclosed spindle with a maximum run out of 0005″ for accurate drilled holes. 12-speeds, digital depth and rpm readout, 6″ spindle travel. Rack and pinion table raiser.

 

JET 692190 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill

JET 692190 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill)

JET 692190 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) - Precision bored and honed milling head. Large diameter quill is chromed. Certified meehanite castings. Spindle head is internally cooled. High precision class 7 spindle bearings.

 

CH Hanson Palmgren Machine 9680341 Radial Arm - 5 Speed Bench step pulley drill press

CH Hanson Palmgren Machine 9680341 Radial Arm – 5 Speed Bench step pulley drill press

CH Hanson Palmgren Machine 9680341 Radial Arm – 5 Speed Bench step pulley drill press - Swing depth from 9-inch to 33-inch (45-inch to 165-inch from spindle to column). Head tilts 90-degree right and left with spindle travel of 315-inch. Radial arm design with swing from 9 to 33″, tilting head and table. Palmgren radial arm, 5 speed bench step pulley drill press.

 

6 Diameter - 3 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

6″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

6″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - Manufacture = congress. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 2nd step = 5″. 3rd step = 6″. 1st step = 4″.

 

JET 692197 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill

JET 692197 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill)

JET 692197 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) - High precision class 7 spindle bearings. Precision bored and honed milling head. Spindle head is internally cooled. Large diameter quill is chromed. Certified meehanite castings.

 

Palmgren Radial Arm - 5 Speed Floor step pulley drill press

Palmgren Radial Arm – 5 Speed Floor step pulley drill press

Palmgren Radial Arm – 5 Speed Floor step pulley drill press - Radial arm design with swing from 9 to 33″, tilting head and table. Keyed 5/8-inch chuck with jt3 taper with drilling capacity of 5/8-inch in case iron. Swing depth from 9-inch to 33-inch (45-inch to 165-inch from spindle to column). Head tilts 90-degree right and left with spindle travel of 315-inch.

 

JET 692198 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill with X-Axis Powerfeed

JET 692198 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X-Axis Powerfeed

JET 692198 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X-Axis Powerfeed - High precision class 7 spindle bearings. Large diameter quill is chromed. Certified meehanite castings. Spindle head is internally cooled. Precision bored and honed milling head.

 

6 Diameter - 4 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

6″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

6″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - Fits 1/2″ & 5/8″ shaft, reducer bushing included. 4th step = 6″. 2nd step = 4″. 1st step = 3″. 3rd step = 5″.

 

5 Diameter - 4 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

5″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

5″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - 1st step = 2″. 2nd step = 3″. 3rd step = 4″. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 4th step = 5″.