Best and Coolest 19 Power Drill Augers

 

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools - Solid center design provides extra rigidity while boringwide lands keep the bit straight as it bores through the holesingle-spur cutting edge scribes the circumference of the hole for a smoother finishfast boring in hard and soft woods. Bits have a 4-1/2 twist length and a 7-1/2 overall lengthfull-length heat treatment guards against bending and strengthens the twist.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Full-length heat treatment guards against bending and strengthens the twist. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Wide lands keep the bit straight as it bores through the hole the flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut. Solid center design provides extra rigidity while boring. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. All bits have a 4-1/2-inch twist length and a 7-1/2-inch overall length. Coarse screw point provides fast boring in hard and soft woods.

 

Power Tools Auger Drill Bit Set 8pc 24 Extra Long Wood Drills New With Wood Case

Power Tools Auger Drill Bit Set 8pc 24″ Extra Long Wood Drills New With Wood Case

Power Tools Auger Drill Bit Set 8pc 24″ Extra Long Wood Drills New With Wood Case - Set includes indexed storage case. Auger drill bits are constructed of tempered and hardened alloy steel and feature self feed tip auger bit sizes 1/4″, 5/16″, 3/8″, 15/32″, 9/16″, 5/8″, 11/16″, and 25/32″ all 24″ length. Auger drill bits are an essential tool for carpenters, plumbers, electricians, etc. Description auger wood drill bits set in sizes from 1/4″ to 25/32″. Auger drill bits are constructed of tempered and hardened alloy steel and feature self feed tip. Auger bit sizes 1/4″, 5/16″, 3/8″, 15/32″, 9/16″, 5/8″, 11/16″, and 25/32″ all twenty four inch length. Auger wood drill bits set in sizes from 1/4″ to 25/32″ can be used with hand auger drills, or power drills auger drill bits are an essential tool for carpenters, plumbers, electricians, etc. Auger drill bits are primarily used for drilling clean, neat holes in wood, and can be used with hand auger drills, or power drills.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Wide lands keep the bit straight as it bores through the hole. Solid center design provides extra rigidity while boring. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Full-length heat treatment guards against bending and strengthens the twist. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Wide lands keep the bit straight as it bores through the hole the flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. All bits have a 4-1/2-inch twist length and a 7-1/2-inch overall length. Solid center design provides extra rigidity while boring. Coarse screw point provides fast boring in hard and soft woods.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Full-length heat treatment guards against bending and strengthens the twist. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Wide lands keep the bit straight as it bores through the hole.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Full-length heat treatment guards against bending and strengthens the twist. Wide lands keep the bit straight as it bores through the hole.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Full-length heat treatment guards against bending and strengthens the twist.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Full-length heat treatment guards against bending and strengthens the twist. Solid center design provides extra rigidity while boring. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Wide lands keep the bit straight as it bores through the hole.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Full-length heat treatment guards against bending and strengthens the twist. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Wide lands keep the bit straight as it bores through the hole. Solid center design provides extra rigidity while boring.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Full-length heat treatment guards against bending and strengthens the twist. Wide lands keep the bit straight as it bores through the hole. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Solid center design provides extra rigidity while boring. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.

 

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools - Bits have a 4-1/2 twist length and a 7-1/2 overall lengthfull-length heat treatment guards against bending and strengthens the twist. Solid center design provides extra rigidity while boringwide lands keep the bit straight as it bores through the holesingle-spur cutting edge scribes the circumference of the hole for a smoother finishfast boring in hard and soft woods.

 

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools - Bits have a 4-1/2 twist length and a 7-1/2 overall lengthfull-length heat treatment guards against bending and strengthens the twist. Solid center design provides extra rigidity while boringwide lands keep the bit straight as it bores through the holesingle-spur cutting edge scribes the circumference of the hole for a smoother finishfast boring in hard and soft woods.

 

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools - Solid center design provides extra rigidity while boringwide lands keep the bit straight as it bores through the holesingle-spur cutting edge scribes the circumference of the hole for a smoother finishfast boring in hard and soft woods. Bits have a 4-1/2 twist length and a 7-1/2 overall lengthfull-length heat treatment guards against bending and strengthens the twist.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Coarse screw point provides fast boring in hard and soft woods. Solid center design provides extra rigidity while boring. All bits have a 4-1/2-inch twist length and a 7-1/2-inch overall length. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Wide lands keep the bit straight as it bores through the hole the flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Full-length heat treatment guards against bending and strengthens the twist. Wide lands keep the bit straight as it bores through the hole. Solid center design provides extra rigidity while boring. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Full-length heat treatment guards against bending and strengthens the twist. Solid center design provides extra rigidity while boring. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Wide lands keep the bit straight as it bores through the hole.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Full-length heat treatment guards against bending and strengthens the twist. Wide lands keep the bit straight as it bores through the hole. Solid center design provides extra rigidity while boring.