Best 24 Er Collets for 2019

 

uxcell ER20 12 Spring Collet Milling Lathe Tool Bit Holder #ad

uxcell ER20 1/2″ Spring Collet Milling Lathe Tool Bit Holder

uxcell ER20 1/2″ Spring Collet Milling Lathe Tool Bit Holder #ad - This er collet is the most widely used clamping system in the world used for a variety of machining applications including boring, milling, reaming, tapping and grinding. Power clamping ability, high accuracy. .

 

GS 531429 Premium Balanced ER Collet Chuck-COLLET RANGE 118 - 1023 GAGE LENGTH 400 #ad

GS 531429 Premium Balanced ER Collet Chuck-COLLET RANGE: .118″ – 1.023″ GAGE LENGTH: 4.00″

GS 531429 Premium Balanced ER Collet Chuck-COLLET RANGE: .118″ – 1.023″ GAGE LENGTH: 4.00″ #ad - Threaded through holes for a back-up screw (tool stop) or coolant through when removed. Featuresflexibility to allow and combine drilling, reaming, milling and tapping utilizing the same chuck without sacrificing accuracy or rigidity. Factory balanced to save spindle life, tool life and increased productivity. .

 

ER Combination Collet Wrench combines ER 32 ER 16 and ER 11 collet wrench and has a Retention KnobPull Stud and Vise Wrench combo bundle also available to include ER 40 ER 25 and ER 20 collet wrench #ad

ER Combination Collet Wrench (combines ER 32, ER 16 and ER 11 collet wrench and has a Retention Knob/Pull Stud and Vise Wrench) (combo bundle also available to include ER 40, ER 25 and ER 20 collet wrench)

ER Combination Collet Wrench (combines ER 32, ER 16 and ER 11 collet wrench and has a Retention Knob/Pull Stud and Vise Wrench) (combo bundle also available to include ER 40, ER 25 and ER 20 collet wrench) #ad - Er 32 collet wrench, er 16 collet wrench, er 11 collet wrench, retention knob/pull stud, vise wrench. Combines the most commonly used er collet wrenches for cnc milling/lathing machines for cost savings and convenience.

 

ER20 COLLETS SET 11 PCs 18 to 12 PRIME QUALITY TESTED RUN OUT 00003 #ad

ER20 COLLETS SET 11 PCs 1/8″ to 1/2″ PRIME QUALITY TESTED RUN OUT 0.0003″

ER20 COLLETS SET 11 PCs 1/8″ to 1/2″ PRIME QUALITY TESTED RUN OUT 0.0003″ #ad - Made from alloy spring steel and hardened to hrc 44-48. Hole size 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, 1/2″. Indicated fractional size is true imperial size not from metric conversion. Suitable for r8, mt, cat, bt chuck holders. Tested tir 00003″.

 

M-TYPE M64 X 2 ER COLLET CHUCK NUT- ER-50 #ad

M-TYPE M64 X 2 ER COLLET CHUCK NUT- ER-50

M-TYPE M64 X 2 ER COLLET CHUCK NUT- ER-50 #ad - Thread m64 x 200. Fits er-50. L(mm) 355. D(mm) 78.

 

Sandvik Coromant 39314-11 0450 ER Collet #ad

Sandvik Coromant 393.14-11 0450 ER Collet

Sandvik Coromant 393.14-11 0450 ER Collet #ad - . 50mm collets tool style code 393. 14 collet connection din 6499, form b pack of 1. Er collet size 11, 4.

 

B-TYPE M32 X 15 ER COLLET CHUCK NUT- ER-25 #ad

B-TYPE M32 X 1.5 ER COLLET CHUCK NUT- ER-25

B-TYPE M32 X 1.5 ER COLLET CHUCK NUT- ER-25 #ad - L(mm) 20. D(mm) 42. Thread m32 x 150. Fits er-25.

 

uxcell ER20 3mm Stainless Steel Spring Collet Chuck Milling Lathe Tool #ad

uxcell ER20 3mm Stainless Steel Spring Collet Chuck Milling Lathe Tool

uxcell ER20 3mm Stainless Steel Spring Collet Chuck Milling Lathe Tool #ad - Clamping range 3-2mm/ 012″-008″clamping diameter 3mm/ 012″. Overall size 20 x 31mm/ 079″ x 12″(maxdiah)material stainless steel. Package content 1 x spring collet chuck. Color silver tonenet weight 45g. Product name spring colletmodel no er20.

 

uxcell Round Chuck Mill Stainless Steel Spring Collet ER20 ER-20 6mm-7mm #ad

uxcell Round Chuck Mill Stainless Steel Spring Collet ER20 ER-20 6mm-7mm

uxcell Round Chuck Mill Stainless Steel Spring Collet ER20 ER-20 6mm-7mm #ad - Color silver tonenet weight 39g. Product name spring colletmodel no er20. Overall size 22 x 32mm/ 09″ x 13″(maxdiah)material stainless steel. Package content 1 x spring collet chuck. Clamping range 6-7mm/ 024″-028″clamping diameter 7mm/ 028″.

 

HHIP 3900-5116 ER Collet Chuck ER-20 Type 34 x 4 Straight Shank 04-511 Capacity #ad

HHIP 3900-5116 ER Collet Chuck, ER-20 Type, 3/4″ x 4″ Straight Shank, .04-.511″ Capacity

HHIP 3900-5116 ER Collet Chuck, ER-20 Type, 3/4″ x 4″ Straight Shank, .04-.511″ Capacity #ad - For heavy duty jobs. Hhip er collet straight shank features precision made with 0. R. 0008″ t. 04-. I. 511″. . Product specifications shank 3/4×4″ type er-20 capacity.

 

B-TYPE M40 X 15 ER COLLET CHUCK NUT- ER-32 #ad

B-TYPE M40 X 1.5 ER COLLET CHUCK NUT- ER-32

B-TYPE M40 X 1.5 ER COLLET CHUCK NUT- ER-32 #ad - D(mm) 50. Fits er-32. Thread m40 x 150. L(mm) 225.

 

uxcell Machine 4-3mm Clamping Range Spring Collet Chuck ER20-4 #ad

uxcell® Machine 4-3mm Clamping Range Spring Collet Chuck ER20-4

uxcell® Machine 4-3mm Clamping Range Spring Collet Chuck ER20-4 #ad - Package content 1 x spring collet chuck. Product name spring colletmodel no er20-4. Color silver tonenet weight 36g. Clamping range 4-3mm/ 016″-012″clamping diameter 4mm/ 016″. Overall size 20 x 32mm/ 078″ x 125″(dialength)material stainless steel.

 

R8 Quick Change End Mill holder ER Collet Chuck Tooling Kit #ad

R8 Quick Change End Mill holder, ER Collet Chuck Tooling Kit

R8 Quick Change End Mill holder, ER Collet Chuck Tooling Kit #ad - Set of (15) er25 collets (full range from 1/16″ to 5/8″ diameter tools). 4 year warranty, made in the usa. Accurate to within 0005″ tir (measured at tool in collet). R8 quick change master holder set of (4) quick change er25 collet adapters. Concentric to within 0002″ (r8 taper to female taper).

 

Techniks 04232-716 Er32 716 Collet #ad

Techniks 04232-7/16 Er32 7/16 Collet

Techniks 04232-7/16 Er32 7/16 Collet #ad - Select your item(s) then click add to cart. Legend below explains sizing. We stock most types of cnc woodworking collets. For er colllets in metric sizes and other brand cnc machine collets, collet sets, nuts, spanner wrenches, tool holders, and accessories, please call 801-592-7835 for pricing and ordering. The number after the dash in the item number is the inside diameter in inches (for example, se04211-116 is 1/16 inch inside diameter). The er collets in inch sizes along with prices are listed below. Check your old collets for the correct number.

 

M-TYPE M40 X 15 ER COLLET CHUCK NUT- ER-32 #ad

M-TYPE M40 X 1.5 ER COLLET CHUCK NUT- ER-32

M-TYPE M40 X 1.5 ER COLLET CHUCK NUT- ER-32 #ad - D(mm) 50. Thread m40 x 150. Fits er-32. L(mm) 225.

 

GS 531423 Premium Balanced ER Collet Chuck-COLLET RANGE 078 - 787 GAGE LENGTH 400 #ad

GS 531423 Premium Balanced ER Collet Chuck-COLLET RANGE: .078″ – .787″ GAGE LENGTH: 4.00″

GS 531423 Premium Balanced ER Collet Chuck-COLLET RANGE: .078″ – .787″ GAGE LENGTH: 4.00″ #ad - Featuresflexibility to allow and combine drilling, reaming, milling and tapping utilizing the same chuck without sacrificing accuracy or rigidity. Threaded through holes for a back-up screw (tool stop) or coolant through when removed. . Factory balanced to save spindle life, tool life and increased productivity.

 

Amana Tool WR-120 CNC Replacement Mini Wrench for ER Collet Holder Extensions TE-100 TE-104 and TE-106 #ad

Amana Tool WR-120 CNC Replacement Mini Wrench for ER Collet Holder Extensions TE-100, TE-104 and TE-106

Amana Tool WR-120 CNC Replacement Mini Wrench for ER Collet Holder Extensions TE-100, TE-104 and TE-106 #ad - Black zinc plated finish. Patent pending design. 1/4″ ar 360 plate.

 

ER Combination Collet Wrench bundle of 2 but available separately Two wrenches that combine ER 40 ER 32 ER 25 ER 20 ER 16 and ER 11 collet wrench Also has a retention knobpull stud and vise wrench on both #ad

ER Combination Collet Wrench (bundle of 2 but available separately) Two wrenches that combine ER 40, ER 32, ER 25, ER 20, ER 16 and ER 11 collet wrench. Also has a retention knob/pull stud and vise wrench on both)

ER Combination Collet Wrench (bundle of 2 but available separately) Two wrenches that combine ER 40, ER 32, ER 25, ER 20, ER 16 and ER 11 collet wrench. Also has a retention knob/pull stud and vise wrench on both) #ad - Er 32 combo wrench combines er 32, er 16 and er 11 collet wrench. Both combo wrenches have a retention knob/pull stud, vise wrench. Er 40 combo wrench combines er 40, er 25, er 20 and er 11 collet wrench. Combines the most commonly used er collet wrenches for cnc milling/lathing machines for cost savings and convenience.

 

uxcell ER20 1mm-2mm Stainless Steel Spring Collet Chuck Milling Lathe Tool #ad

uxcell ER20 1mm-2mm Stainless Steel Spring Collet Chuck Milling Lathe Tool

uxcell ER20 1mm-2mm Stainless Steel Spring Collet Chuck Milling Lathe Tool #ad - Package content 1 x spring collet chuck. Product name spring colletmodel no er20. Overall size 22 x 32mm/ 09″ x 13″(maxdiah)material stainless steel. Clamping range 1-2mm/ 004″-008″clamping diameter 2mm/ 004″. Color silver tonenet weight 43g.

 

uxcell ER16 Spring Collet 4-3mm Clamp Dia for CNC Chuck Milling Lathe #ad

uxcell ER16 Spring Collet 4-3mm Clamp Dia for CNC Chuck Milling Lathe

uxcell ER16 Spring Collet 4-3mm Clamp Dia for CNC Chuck Milling Lathe #ad - Product name spring collet chuckmodel no er16-4. Color silver graynet weight 23g. Package content 1 x spring collet chuck. Clamping range 4-3mm/016″-012″clamping diameter 4mm/016″. Overall size 16 x 27mm/063″ x 11″(dialength)material stainless steel.

 

T-TYPE M22 X 15 ER COLLET CHUCK NUT- ER-16 #ad

T-TYPE M22 X 1.5 ER COLLET CHUCK NUT- ER-16

T-TYPE M22 X 1.5 ER COLLET CHUCK NUT- ER-16 #ad - Thread m22 x 150. D(mm) 28. L(mm) 175. Fits er-16.

 

uxcell ER32 ER-32 20mm Stainless Steel CNC Milling Spring Collet #ad

uxcell® ER32 ER-32 20mm Stainless Steel CNC Milling Spring Collet

uxcell® ER32 ER-32 20mm Stainless Steel CNC Milling Spring Collet #ad - Product name spring colletmodel no er32. Material stainless steelcolor silver tone. Clamping range 20mm/ 079″clamping diameter 20mm/ 079″. Slotted part diameter 29mm/ 11″overall size 33 x 40mm/ 13″ x 16″(dialength). Net weight 91gpackage content 1 x spring collet chuck.

 

GS 531418 Prem Balance ER Collet Chuck COLLET RANGE 039629 L 250 #ad

GS 531418 Prem Balance ER Collet Chuck COLLET RANGE .039”.629” L 2.50

GS 531418 Prem Balance ER Collet Chuck COLLET RANGE .039”.629” L 2.50 #ad - Features flexibility to allow and combine drilling, reaming, milling and tapping utilizing the same chuck without sacrificing accuracy or rigidity. Threaded through holes for a back-up screw (tool stop) or coolant through when removed. Factory balanced to save spindle life, tool life and increased productivity.

 

Clamping Range 13-12mm Stainless Steel ER32-13 Spring Collet #ad

Clamping Range 13-12mm Stainless Steel ER32-13 Spring Collet

Clamping Range 13-12mm Stainless Steel ER32-13 Spring Collet #ad - Model no er32-13 clamping range 13mm-12mm/0512″-0472″ accuracy 0001mm. Package content 1 x spring collet. Suitable for er collet chuck holder material stainless steel color silver tone. Product name spring collet. Overall size 33 x 40mm/130″ x 157″(dialength) weight 136g.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.