Best 21 Diamond Hole Saw Drill Bits for 2020

 

uxcell 85mm Dia Diamond Hole Saw Drill Bit Cutter for Glass Ceramic Tile

uxcell® 85mm Dia Diamond Hole Saw Drill Bit Cutter for Glass Ceramic Tile

uxcell® 85mm Dia Diamond Hole Saw Drill Bit Cutter for Glass Ceramic Tile - Attention the hinge boring bit is used on bench drill or drill machine. Hand drill or electric drill is not recommended. Can be used to drill hole in glass, tile and ceramic. Should be used with a electric drill, here is not included. Attention the hole saw is used on bench drill or drill machine. . Hand drill or electric drill is not recommended.

 

Aiskaer 15 pcs High quality Diamond Hole Saw Drill Bit Set - Diamond Hole SAW Drill BIT FOR Ceramic Porcelain Tiles Glass Marble Granite Hole Sizes from 4mm to 40mm

Aiskaer 15 pcs High quality Diamond Hole Saw Drill Bit Set – Diamond Hole SAW Drill BIT FOR Ceramic, Porcelain Tiles, Glass, Marble, Granite, Hole Sizes from 4mm to 40mm

Aiskaer 15 pcs High quality Diamond Hole Saw Drill Bit Set – Diamond Hole SAW Drill BIT FOR Ceramic, Porcelain Tiles, Glass, Marble, Granite, Hole Sizes from 4mm to 40mm - This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, cer. Start your hole diagonally, make a round trace and then hold drill straight. Size4mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm,22mm,26mm,28mm,30mm,32mm,40mm. Easy to use, high quality,good performance, long life, excellent for making clean and accurate hole. Always use lubrication (water ), otherwise the diamond core drill will burn, start your hole diagon.

 

B&S FEEL Diamond Tools 5 Diamond Dust Hole Saw for Tile  Glass Marble  Granite  Ceramic  Porcelain  Stone Holesaw 34 1 1-316 1-38 1-58 Electroplated Diamond Drill Bits

B&S FEEL Diamond Tools 5 Diamond Dust Hole Saw for Tile / Glass/ Marble / Granite / Ceramic / Porcelain / Stone Holesaw 3/4″, 1″, 1-3/16″, 1-3/8″, 1-5/8″ Electroplated Diamond Drill Bits

B&S FEEL Diamond Tools 5 Diamond Dust Hole Saw for Tile / Glass/ Marble / Granite / Ceramic / Porcelain / Stone Holesaw 3/4″, 1″, 1-3/16″, 1-3/8″, 1-5/8″ Electroplated Diamond Drill Bits - Excellent results in granite, ceramic, porcelain, glass, marble, slate, and tile. To prolong the life of these bits, use on a low speed with coolant (water/oil). Sizes 3/4″, 1″, 1-3/16″, 1-3/8″, 1-5/8″. The diamond coating on these saws give superior performance and life.

 

Yosoo 2PCS Diamond Coated Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

Yosoo 2PCS Diamond Coated Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

Yosoo 2PCS Diamond Coated Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain - Can be used with a standard electric drill( excluding in this item ). Excellent for making clean and accurate hole on glass , tile and marble. Easy to use, high quality,good performance, long life. This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, cer. This is a brand new item.

 

58 Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

5/8″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

5/8″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile - Drilling ceramic tile, drilling bathroom tile, drilling stone tile, drilling glass block, cutting holes in glass tile, drilling through glass tile, glass drill bit. High quality new hi-tech design diamond hole saw drill bits (plated series) should handle all your glass drilling and porcelain tile drilling needs.

 

DerBlue 10 pcs Diamond Hole Saw Drill Bit Set - Diamond Hole SAW Drill BIT FOR Ceramic Porcelain Tiles Glass Marble Granite Hole Sizes from 6mm to 32mm

DerBlue 10 pcs Diamond Hole Saw Drill Bit Set – Diamond Hole SAW Drill BIT FOR Ceramic, Porcelain Tiles, Glass, Marble, Granite, Hole Sizes from 6mm to 32mm

DerBlue 10 pcs Diamond Hole Saw Drill Bit Set – Diamond Hole SAW Drill BIT FOR Ceramic, Porcelain Tiles, Glass, Marble, Granite, Hole Sizes from 6mm to 32mm - Size6mm,8mm,10mm,12mm,14mm,16mm,18mm,22mm,26mm,32mm. Always use lubrication (water ), otherwise the diamond core drill will burn, start your hole diagon. Easy to use, high quality,good performance, long life, excellent for making clean and accurate hole. Start your hole diagonally, make a round trace and then hold drill straight. This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, cer.

 

New 2pc 12 1 Diamond Hole Saw Drill Bit Set Ceramic Tile Marble Glass Granite

New 2pc 1/2″ 1″ Diamond Hole Saw Drill Bit Set Ceramic Tile Marble Glass Granite

New 2pc 1/2″ 1″ Diamond Hole Saw Drill Bit Set Ceramic Tile Marble Glass Granite - Surface by nickel plated for vitrified tiles, glass, tiles, artificial stone, ceramics and other brittle materials, drilling operations. Description this 2pc nickel plated diamond dust hole saw bit set will put a hole where you need it shank 1/4″ sizes 1″, 1/2″ excellent results in glass, marble, slate, and tile. Small incision resistance, chip easily, improved drilling speed, ease of decoration after opening. Suitable for the tool drill, bench drill, high power grinders, pneumatic drills, magnet drill, pistol drill. Material alloy.

 

4-14 Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

4-1/4″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

4-1/4″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile - It is also recommended to use a suitable diamond coolant, such as crl diamond tool coolant. Heavier and deeper layer of diamond coating and notches in the core allow to drill up to 200 holes in ¼” thick glass. The diamond drills must always be used at a proper speed. You may also use a crl sharpening stone (part number pdss) to achieve maximum life of you diamond drill. High quality new hi-tech design diamond hole saw drill bits (plated series) should handle all your glass drilling and porcelain tile drilling needs.

 

85mm Glass Hole Saw - SODIALR 85mm Dia Diamond Hole Saw Drill Bit Cutter for Glass Ceramic Tile

85mm Glass Hole Saw – SODIAL(R) 85mm Dia Diamond Hole Saw Drill Bit Cutter for Glass Ceramic Tile

85mm Glass Hole Saw – SODIAL(R) 85mm Dia Diamond Hole Saw Drill Bit Cutter for Glass Ceramic Tile - Sodial is a registered trademark. 94″ x 0. 3″material metal, diamond particlescolor silver toneshank size 24mm x 10mm/ 0. 1″package content 1 x 85mm glass hole sawnotelight shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/-1-3 cm. Sodial(r) 85mm dia diamond hole saw drill bit cutter for glass ceramic tileproduct name glass hole sawhole diameter 85mm/3. Our products will enhance your experience to unparalleled inspiration. Only authorized seller of sodial can sell under sodial listings. 39″ (ld)total length 54mm/2.

 

2-18 Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

2-1/8″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

2-1/8″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile - High quality new hi-tech design diamond hole saw drill bits (plated series) should handle all your glass drilling and porcelain tile drilling needs. Drilling ceramic tile, drilling bathroom tile, drilling stone tile, drilling glass block, cutting holes in glass tile, drilling through glass tile, glass drill bit.

 

8 Pcs Diamond Hole Saw Drill Bit Set 10-50mm Granite Glass Tile - Tools 8 Piece Diamond Dust Hole Saw Drill Bit for Ceramic Tile Marble Porcelain

8 Pcs Diamond Hole Saw Drill Bit Set 10-50mm Granite Glass Tile – Tools 8 Piece Diamond Dust Hole Saw Drill Bit for Ceramic Tile Marble Porcelain

8 Pcs Diamond Hole Saw Drill Bit Set 10-50mm Granite Glass Tile – Tools 8 Piece Diamond Dust Hole Saw Drill Bit for Ceramic Tile Marble Porcelain - Excellent for making clean and accurate hole. Size 10 / 14 / 18 / 20 / 26 / 32 / 45 / 50mm. The diamond coated drill bit removes a complete circle from glass, tiles, marble, granite, ceramic,etc. Can be used with a standard electric drill(not included). Note use water for lubrication, or the diamond core drill will burn.

 

Osko LOT 10 Pcs SET Diamond Hole Saw Drill Bit Set 14 38 12 34 1 1 14 1 38 1 12 1 34 2

Osko® LOT 10 Pcs SET Diamond Hole Saw Drill Bit Set 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1 1/4″, 1 3/8″, 1 1/2″, 1 3/4″, 2″

Osko® LOT 10 Pcs SET Diamond Hole Saw Drill Bit Set 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1 1/4″, 1 3/8″, 1 1/2″, 1 3/4″, 2″ - 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1 1/4″, 1 3/8″, 1 1/2″, 1 3/4″, 2″. High quality set is ideal for drilling clean and accurate holesuse with standard electric or batter. Heavy duty hole saws plated with nickel with diamond coating gives superior performance. With special design of diamond brazing, the edge of saw blade will be free cuttingthere is no need. 45# steel base and type 3 diamond,for porcelain, glass, marble, ceramic, rock and granite.

 

MissAJLOT 15 Pcs SET Diamond Hole Saw Drill Bit Set 6mm - 50mm Granite Glass Tile - Tools 15 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain

Miss.AJLOT 15 Pcs SET Diamond Hole Saw Drill Bit Set 6mm – 50mm Granite Glass Tile – Tools 15 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain

Miss.AJLOT 15 Pcs SET Diamond Hole Saw Drill Bit Set 6mm – 50mm Granite Glass Tile – Tools 15 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain - Always use lubrication (water), otherwise the diamond core drill will burn. Start your hole diagonally, make a round trace and then hold drill straight. 4,6,8,10,12,14,16,18,20,22,25,28,30,40,50mm. Excellent for making clean and accurate hole on glass , tile and marble. Can be used with a standard electric drill(excluding in this item).

 

Small 3 Pcs SET Diamond Hole Saw Drill Bit Set Granite Glass Tile - Tools 3 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain 14 - 12 -34 Inch In

Small 3 Pcs SET Diamond Hole Saw Drill Bit Set Granite Glass Tile – Tools 3 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain 1/4″ – 1/2″ -3/4″ Inch In

Small 3 Pcs SET Diamond Hole Saw Drill Bit Set Granite Glass Tile – Tools 3 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain 1/4″ – 1/2″ -3/4″ Inch In - For porcelain, glass, marble, ceramic, rock and granite. 1/4″ inch is one of the most popular sizes. Diamond drill bits, hole saws. 3 popular sizes 1/4″ 1/2″ 3/4″, factory direct products bulk packages.

 

3 Pcs SET Diamond Hole Saw Drill Bit Set Granite Glass Tile - Tools 3 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain - 12 -34 - 1 Inch In

3 Pcs SET Diamond Hole Saw Drill Bit Set Granite Glass Tile – Tools 3 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain – 1/2″ -3/4″ – 1″ Inch In

3 Pcs SET Diamond Hole Saw Drill Bit Set Granite Glass Tile – Tools 3 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain – 1/2″ -3/4″ – 1″ Inch In - Excellent results in glass, marble, slate, and tile. Nickel plated. Sizes (shank diameter 3/4″) 1/2″ 3/4″ 1″ note to prolong the life of these bits, use on a low speed with coolant (water/oil). Segmented design works better and lasts longer. The diamond coating on these saws give superior performance and life.

 

LOT 10 Pcs SET Diamond Hole Saw Drill Bit Set 14 - 2 Inch Granite Glass Tile - Tools 10 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain

LOT 10 Pcs SET Diamond Hole Saw Drill Bit Set 1/4″ – 2″ Inch Granite Glass Tile – Tools 10 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain

LOT 10 Pcs SET Diamond Hole Saw Drill Bit Set 1/4″ – 2″ Inch Granite Glass Tile – Tools 10 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain - For porcelain, glass, marble, ceramic, rock and granite. Diamond drill bits, hole saws. 10 popular sizes 1/4″ to 2″, factory direct products bulk packages. 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1 1/4″, 1 3/8″, 1 1/2″, 1 3/4″, 2″.

 

1-18 Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

1-1/8″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

1-1/8″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile - Drilling ceramic tile, drilling bathroom tile, drilling stone tile, drilling glass block, cutting holes in glass tile, drilling through glass tile, glass drill bit. High quality new hi-tech design diamond hole saw drill bits (plated series) should handle all your glass drilling and porcelain tile drilling needs.

 

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass 3 8 to 1 Inch 5 Pieces

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/ 8 to 1 Inch, 5 Pieces

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/ 8 to 1 Inch, 5 Pieces - Diamond drill sizes diamond drill set includes 5 diameter of 3/ 8, 1/ 2, 5/ 8, 3/ 4, 1 inch, 5 cm and 55 cm in length, good quality diamond drilling tool set. Multiple uses hole saw set can be applied on porcelain, glass, tile, ceramics, stone, granite and other hard surfaces, for most common standard electric drillers. Clean and accurate hole can drill a complete clean and accurate hole from hard surface, no broken edges and no tremor phenomenon, long service life, durable. Warm notice please add lubricants or water frequently to avoid sparks while using these coated grit hole saw set, can also enhance the working life by doing this. Steel and nickel coated material these drill coated hole saws are made from steel and nickel coated material, the drill head is covered by diamond particles, sturdy.

 

BABAN Diamond Holesaw Drill Bit Hole Saw Set For Cutter Glass Ceramic Marble 6-32mm Pack of 10

BABAN Diamond Holesaw Drill Bit Hole Saw Set For Cutter Glass Ceramic Marble 6-32mm Pack of 10

BABAN Diamond Holesaw Drill Bit Hole Saw Set For Cutter Glass Ceramic Marble 6-32mm Pack of 10 - Size, 6mm/023″, 8mm/031″, 10mm/039″, 12mm/047″, 14mm/055″, 16mm/062″, 18mm/07″, 22mm/086″, 26mm/102″, 32mm/126″. Ideal for, this diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or otherthey have diamond coating like any standard bit for these purposes. Easy to use, this diamond drill bits are high quality and good performance that excellent for making clean and accurate hole. Note, when you using the diamond drill bits, please use lubrication (water),otherwise the diamond core drill will burn. Material, these diamond drill bits made of high-speed steel that is durable and have a long sevice life.

 

2-14 Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

2-1/4″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile

2-1/4″ Diamond Hole Saw Drill Bit for Drilling Glass and Porcelain Tile - Drilling ceramic tile, drilling bathroom tile, drilling stone tile, drilling glass block, cutting holes in glass tile, drilling through glass tile, glass drill bit. High quality new hi-tech design diamond hole saw drill bits (plated series) should handle all your glass drilling and porcelain tile drilling needs.

 

2-14 575 mm DiamondSure Diamond Hole Saw Drill Bit for Glass Tile Granite Ceramic Porcelain Stone

2-1/4″ 57.5 mm DiamondSure Diamond Hole Saw Drill Bit for Glass, Tile, Granite, Ceramic, Porcelain, Stone

2-1/4″ 57.5 mm DiamondSure Diamond Hole Saw Drill Bit for Glass, Tile, Granite, Ceramic, Porcelain, Stone - Nickel plated reduces bit friction and heat build-up and inhibits rust. Tip lubrication hole provides optimum tip lubrication by allowing water flow in and out of bit. Grooved tip edge provides maximum surface area & increases water “churn” for tip lubrication. Core extraction hole special holes in back of the “bell” allow easy removal of cores or plugs. Bonded diamond grit electroplate bonded diamonds for optimum diamond life.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.