24 Top Npt Tapers

 

RedLine Tools RT32208 - 38-18 H4 Limit Uncoated HSS High-Speed Steel NPT Taper Pipe Tap

RedLine Tools RT32208 – 3/8-18, H4 Limit, Uncoated, HSS (High-Speed Steel), NPT Taper Pipe Tap

RedLine Tools RT32208 – 3/8-18, H4 Limit, Uncoated, HSS (High-Speed Steel), NPT Taper Pipe Tap - Made in the usa. Thread limit h4. Type npt, taper pipe. Thread size/pitch 3/8-18. Coating uncoated.

 

Hanson 8203 Tap 14-18 Npt Taper for Tap Die Extraction

Hanson 8203 Tap 1/4-18 Npt Taper for Tap Die Extraction

Hanson 8203 Tap 1/4-18 Npt Taper for Tap Die Extraction - Taps are tapered at a rate of 3/4 inches per foot. Each taper tap is used to cut internal threads in pipes. This taper tap is ideal for pipe fittings. Nominal size of the tap is that of the pipe fitting being tapped. 1/4″ size with 18 npt (national pipe taper).

 

RedLine Tools RTG7013 - 34-14 Oxide Coated Powdered Metal Steel NPT Taper Pipe Tap

RedLine Tools RTG7013 – 3/4-14, Oxide Coated, Powdered Metal Steel, NPT Taper Pipe Tap

RedLine Tools RTG7013 – 3/4-14, Oxide Coated, Powdered Metal Steel, NPT Taper Pipe Tap - Made in the usa. Thread size/pitch 3/4-14. Type npt, taper pipe. Thread limit. Coating oxide coated.

 

Kodiak Cutting Tools KODIAK233517 USA Made NPT Taper Pipe Threading Tap 4 Flutes Ground Threads High Speed Steel 06875 Shank 1-38 Thread Length 3-18 Overall Length 12-14 Size

Kodiak Cutting Tools KODIAK233517 USA Made NPT Taper Pipe Threading Tap, 4 Flutes, Ground Threads, High Speed Steel, 0.6875″ Shank, 1-3/8″ Thread Length, 3-1/8″ Overall Length, 1/2-14 Size

Kodiak Cutting Tools KODIAK233517 USA Made NPT Taper Pipe Threading Tap, 4 Flutes, Ground Threads, High Speed Steel, 0.6875″ Shank, 1-3/8″ Thread Length, 3-1/8″ Overall Length, 1/2-14 Size - 6875″ shank 1-3/8 thread length 3-1/8″ overall length 4 flute pipe threading tap for national pipe taper threads. 1/2-14 npt taper pipe tap. .

 

Morse Cutting Tools 86338 MARXBORE NPT Taper Pipe Taps High Speed Steel Gold and Black Finish 7 Flutes 2 - 11-12 Size

Morse Cutting Tools 86338 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 7 Flutes, 2″ – 11-1/2 Size

Morse Cutting Tools 86338 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 7 Flutes, 2″ – 11-1/2 Size - Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. . Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads and improved thread quality. Assembly requires the use of a thread sealant to ensure a tight seal.

 

Kodiak Cutting Tools KCT212023 USA Made NPT Taper Pipe Threading Tap for National Pipe Taper Threads Ground Threads High Speed Steel 4 Flute 03125 Shank 1116 Thread Length 2-18 Overall Length 116-27 Size

Kodiak Cutting Tools KCT212023 USA Made NPT Taper Pipe Threading Tap for National Pipe Taper Threads, Ground Threads, High Speed Steel, 4 Flute, 0.3125″ Shank, 11/16 Thread Length, 2-1/8″ Overall Length, 1/16-27 Size

Kodiak Cutting Tools KCT212023 USA Made NPT Taper Pipe Threading Tap for National Pipe Taper Threads, Ground Threads, High Speed Steel, 4 Flute, 0.3125″ Shank, 11/16 Thread Length, 2-1/8″ Overall Length, 1/16-27 Size - 3125″ shank 11/16 thread length 2-1/8″ overall length 4 flute pipe threading tap for national pipe taper threads. . 1/16-27 npt taper pipe tap.

 

RedLine Tools RT32206 - 14-18 H4 Limit Uncoated HSS High-Speed Steel NPT Taper Pipe Tap

RedLine Tools RT32206 – 1/4-18, H4 Limit, Uncoated, HSS (High-Speed Steel), NPT Taper Pipe Tap

RedLine Tools RT32206 – 1/4-18, H4 Limit, Uncoated, HSS (High-Speed Steel), NPT Taper Pipe Tap - Type npt, taper pipe. Thread limit h4. Made in the usa. Thread size/pitch 1/4-18. Coating uncoated.

 

Titan TT93401 Taper Pipe Tap HSS Uncoated NPT 18 - 2 4 Flutes

Titan TT93401 Taper Pipe Tap, HSS Uncoated, NPT, 1/8″ – 2″, 4 Flutes

Titan TT93401 Taper Pipe Tap, HSS Uncoated, NPT, 1/8″ – 2″, 4 Flutes - 1/8-27 4fl npt taper. Series 775. High speed steel.

 

Morse Cutting Tools 31251 Solid Round NPT Taper Pipe Dies Carbon Steel 1 Outside Diameter 38 Thick 18 27 Size

Morse Cutting Tools 31251 Solid Round NPT Taper Pipe Dies, Carbon Steel, 1″ Outside Diameter, 3/8″ Thick, 1/8″, 27 Size

Morse Cutting Tools 31251 Solid Round NPT Taper Pipe Dies, Carbon Steel, 1″ Outside Diameter, 3/8″ Thick, 1/8″, 27 Size - Round dies are designed for cutting external screw threads, either by hand, using a die stock or by machine, using a floating die holder. Solid round dies are non-adjustable.

 

Kodiak Cutting Tools KODIAK212089 USA Made NPT Taper Pipe Tap Ground Threads High Speed Steel Pipe Threading Tap 5 Flute 09063 Shank 1-38 Thread Length 3-14 Overall Length 34-14 Size

Kodiak Cutting Tools KODIAK212089 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 5 Flute, 0.9063″ Shank, 1-3/8 Thread Length, 3-1/4″ Overall Length, 3/4-14 Size

Kodiak Cutting Tools KODIAK212089 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 5 Flute, 0.9063″ Shank, 1-3/8 Thread Length, 3-1/4″ Overall Length, 3/4-14 Size - 3/4-14 npt taper pipe tap. 9063″ shank 1-3/8 thread length 3-1/4″ overall length 5 flute pipe threading tap for national pipe taper threads.

 

RedLine Tools RT34308 - 38-18 H5 Limit Oxide Coated HSS High-Speed Steel NPT Taper Pipe Tap

RedLine Tools RT34308 – 3/8-18, H5 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap

RedLine Tools RT34308 – 3/8-18, H5 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap - Made in the usa. Coating oxide coated. Thread size/pitch 3/8-18. Type npt interrupted, taper pipe. Thread limit h5.

 

Morse Cutting Tools 86334 MARXBORE NPT Taper Pipe Taps High Speed Steel Gold and Black Finish 5 Flutes 34 - 14 Size

Morse Cutting Tools 86334 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 3/4″ – 14 Size

Morse Cutting Tools 86334 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 3/4″ – 14 Size - Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads and improved thread quality. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Assembly requires the use of a thread sealant to ensure a tight seal.

 

HHIP 1011-3303 3 Piece NPT Taper Pipe Tap Set 1-14~2 Inch

HHIP 1011-3303 3 Piece NPT Taper Pipe Tap Set, 1-1/4~2 Inch

HHIP 1011-3303 3 Piece NPT Taper Pipe Tap Set, 1-1/4~2 Inch - 3 piece npt taper piper tap set ~ thread ground. ~ Ideal for pipe fitting. ~ Cuts internal threads in pipes. ~ High speed steel. ~ Tapered at a rate of 3/4″ per foot. . ~ Includes 1 each of the following sizes 1-1/4~11-1/2, 1-1/2~11-1/2 and 2~11-1/2.

 

HHIP 1011-3306 6 Piece NPT Taper Pipe Tap Set 14~1-14 Inch

HHIP 1011-3306 6 Piece NPT Taper Pipe Tap Set, 1/4~1-1/4 Inch

HHIP 1011-3306 6 Piece NPT Taper Pipe Tap Set, 1/4~1-1/4 Inch - ~ ideal for pipe fitting. ~ High speed steel. ~ Cuts internal threads in pipes. 6 piece npt taper piper tap set ~ thread ground. ~ Includes 1 each of the following sizes 1/4~18, 3/8~18, 1/2~14, 3/4~14, 1~11-1/2, 1-1/4~11-1/2. ~ Tapered at a rate of 3/4″ per foot.

 

ZFE 1Pc 38-18 NPT Taper HSS Pipe Tap Machine Thread Tap

ZFE 1Pc 3/8″-18 NPT Taper HSS Pipe Tap Machine Thread Tap

ZFE 1Pc 3/8″-18 NPT Taper HSS Pipe Tap Machine Thread Tap - Hand threading tap with straight flutes cuts threads in through holes and blind holes. Zfe 1pc 3/8″-18 npt taper hss pipe tap machine thread tap. Round shank with square end allows tap to be used in hand or power-driven applications. Uncoated (bright) tools have no additional surface treatment or coating. High-speed steel for compatibility with a variety of materials.

 

116 - 27 NPT Taper Pipe Die

1/16″ – 27 NPT Taper Pipe Die

1/16″ – 27 NPT Taper Pipe Die - 1/16″, 27 npt taper pipe die. Outside diameter is 25mm. Carbon steel.

 

Morse Cutting Tools 36126 Taper Pipe Taps High-Speed Steel Bright Finish NPT Regular Thread 4 Flutes 12-14 Size

Morse Cutting Tools 36126 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/2″-14″ Size

Morse Cutting Tools 36126 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/2″-14″ Size - Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads. Assembly requires the use of a thread sealant to ensure a tight seal. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips.

 

1-12-11 12 NPT Hex Rethreading Die for Taper Pipe Threads- Carbon Steel

1-1/2″-11 1/2 NPT Hex Rethreading Die for Taper Pipe Threads- Carbon Steel

1-1/2″-11 1/2 NPT Hex Rethreading Die for Taper Pipe Threads- Carbon Steel - For rethreading standard “1-1/2″ pipe”, the actual thread dimension is greater than 1-1/2″. Great in tight places. Can be used with an adjustable wrench. Size 1 1/2″-11 1/2″ npt. For repairing worn or damaged npt taper pipe threads.

 

Morse Cutting Tools 86335 MARXBORE NPT Taper Pipe Taps High Speed Steel Gold and Black Finish 5 Flutes 1 - 11-12 Size

Morse Cutting Tools 86335 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 1″ – 11-1/2 Size

Morse Cutting Tools 86335 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 1″ – 11-1/2 Size - Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Assembly requires the use of a thread sealant to ensure a tight seal. Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads and improved thread quality.

 

RedLine Tools RTY7011 - 12-14 Oxide Coated Powdered Metal Steel NPT Taper Pipe Tap

RedLine Tools RTY7011 – 1/2-14, Oxide Coated, Powdered Metal Steel, NPT Taper Pipe Tap

RedLine Tools RTY7011 – 1/2-14, Oxide Coated, Powdered Metal Steel, NPT Taper Pipe Tap - Type npt, taper pipe. Made in the usa. Thread size/pitch 1/2-14. Thread limit. Coating oxide coated.

 

Kodiak Cutting Tools KODIAK212078 USA Made NPT Taper Pipe Tap Ground Threads High Speed Steel Pipe Threading Tap 4 Flute 06875 Shank 1-38 Thread Length 3-18 Overall Length 12-14 Size

Kodiak Cutting Tools KODIAK212078 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.6875″ Shank, 1-3/8 Thread Length, 3-1/8″ Overall Length, 1/2-14 Size

Kodiak Cutting Tools KODIAK212078 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.6875″ Shank, 1-3/8 Thread Length, 3-1/8″ Overall Length, 1/2-14 Size - . 1/2-14 npt taper pipe tap. 6875″ shank 1-3/8 thread length 3-1/8″ overall length 4 flute pipe threading tap for national pipe taper threads.

 

ZFE 1Pc 34-14 NPT HSS High Speed Steel Taper Pipe Die Machine Thread Die

ZFE 1Pc 3/4″-14 NPT HSS High Speed Steel Taper Pipe Die Machine Thread Die

ZFE 1Pc 3/4″-14 NPT HSS High Speed Steel Taper Pipe Die Machine Thread Die - The round die is a thread cutting tool for processing and revising the external thread. Zfe 3/4″-14 npt hss high speed steel taper pipe die machine thread die designed with clearance hole and coarse thread type. It can be installed in the die wrench or machine tool to manufacture the thread, it is easy to operate. This die needs to use with a die handle stock (not included).

 

AccusizeTools - 116-27 HSS M2 NPT Taper Pipe Tap 4 Flute ANSI Fully Ground NPT-116

AccusizeTools – 1/16″-27 HSS (M2) NPT Taper Pipe Tap, 4 Flute, ANSI, Fully Ground, #NPT-116

AccusizeTools – 1/16″-27 HSS (M2) NPT Taper Pipe Tap, 4 Flute, ANSI, Fully Ground, #NPT-116 - Thread length 11/16”. Number of flutes 4. Overall length 2-1/8”. Thread size 1/16″-27. Thread type npt.

 

Eazypower 82613 18x27 NPT Taper Tap - Quantity 6

Eazypower 82613 1/8×27 NPT Taper Tap – Quantity 6

Eazypower 82613 1/8×27 NPT Taper Tap – Quantity 6 - Coating oxide coated. 1/8×27 npt taper tap. 1/4×18 npt taper tap. 3/8×18 npt taper tap. 1/2×14 npt taper tap.