23 Top Diamond Core Drills

 

Cayken 10 Diamond Core Drill Rig With 58HP 435W Motor For Wet Or Dry Drilling Of Reinforced Concrete Or Brick

Cayken 10″ Diamond Core Drill Rig With 5.8HP 435W Motor For Wet Or Dry Drilling Of Reinforced Concrete Or Brick

Cayken 10″ Diamond Core Drill Rig With 5.8HP 435W Motor For Wet Or Dry Drilling Of Reinforced Concrete Or Brick - Stand is not included. Will cut up to 10-inch diameter holes. Includes wrench set. For use on concrete, brick, stone, rock, ceramic, and fireproof materials. Cayken 10″ diamond core drill rig with 5. 1/4 -inch water valve for wet drilling. X 7 tpidesigned for wet or dry core drilling. 8 hp, 435 w motor. The cayken 2550 has a 110 v, 5. Spline is 1-1/4 in. Soft start electronic current limiter. X 7 tpi. Ce/rohs/iso90001 certified. Drill bit not included. Specificationsmotor specs 5. This drill will cut up to 10-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. 8hp 435w motor for wet or dry drilling of reinforced concrete or brickthe cayken 2550 is designed for wet or dry core drilling. Package includes wrench set, two (2) motor brushes, and 1/4-inch water valve with shut off. Drill features safety clutch and overload protection. 8 hp, 110 v, 60 hz, 435 w, 580 rpmspline 1-1/4 in.

 

Steel Dragon Tools 3 Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 3″ Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 3″ Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs - Diam. Steel dragon tools® 3″ wet laser welded diamond core drill concrete bit fits hilti® milwaukee® rigsuse for wet drilling on a full range of materials from reinforced concrete, asphalt, block, pavement, brick, etc. X 16. 960″ outer. 393″)1 year warranty against manufacture defect. Laser-welded diamond wet core bitsspindle thread 1 1/4″, 72. 25″ hextra tall 10mm segment height (. Wet drilling only. 715″ inner. , 2. Diam.

 

Steel Dragon Tools 4 Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 4″ Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 4″ Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs - Wet drilling only. 671″ inner. 393″)1 year warranty against manufacture defect. 996″ outer. X 16. 25″ hextra tall 10mm segment height (. , 3. Laser-welded diamond wet core bitsspindle thread 1 1/4″, 73. Steel dragon tools® 4″ wet laser welded diamond core drill concrete bit fits hilti® milwaukee® rigsuse for wet drilling on a full range of materials from reinforced concrete, asphalt, block, pavement, brick, etc. Diam. Diam.

 

Hardin HHPSET Hydro-Handle Glass Tile Concrete Wet Diamond Core Drill Bit Hole Saw Set Cordless Drill Adapter

Hardin HHP+SET Hydro-Handle Glass Tile Concrete Wet Diamond Core Drill Bit Hole Saw Set Cordless Drill Adapter

Hardin HHP+SET Hydro-Handle Glass Tile Concrete Wet Diamond Core Drill Bit Hole Saw Set Cordless Drill Adapter - With pads (not included) effectively remove hard water on shower doors, windows and glass on boats. Drill most material with diamond bits in kit 1/4″, 5/16″, 3/8″, 1/2″, 3/4″, 1″, 1-3/8″, 1-1/2″, 2″. Shape edges of tile, granite, marble and stone with vacuum brazed profile wheels (sold separately). Polish tile, marble, porcelain, glass and stone with 3″ diamond polishing pads (not included).

 

3-Pack 18 Diamond Core Drill Bits For Glass and Tile  Free Beginners Drilling Guide  Youll Drill Glass and Tile

3-Pack, 1/8″ Diamond Core Drill Bits For Glass and Tile | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile

3-Pack, 1/8″ Diamond Core Drill Bits For Glass and Tile | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile - This set contains 3 new 1/8″ diamond core bits for glass they fit your drill, drill press or dremel tool. You’ll drill glass, ceramic tile, porcelain, wine bottles, ceramics, and stone. Free shipping in the us no risk, 100% money back guarantee. Free beginner’s drilling instructions easy to use. Easy, use your kitchen scrubbing sponge to hold the glass and cool the bit we’ll show you how.

 

1 12 Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt 1 12 Diameter x 11 Length

1 1/2″ Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 1 1/2″ Diameter x 11″ Length

1 1/2″ Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 1 1/2″ Diameter x 11″ Length - Length 11″ long to produce 10″ core. The professional quality laser welded dry diamond core bits offers the best lifetime available on market. Laser wielded. Segment height 0400″. 5/8″-11 thread.

 

Concord Blades CBW01125SP 1-18 Inch Wet Concrete Diamond Core Drill Bit

Concord Blades CBW01125SP 1-1/8 Inch Wet Concrete Diamond Core Drill Bit

Concord Blades CBW01125SP 1-1/8 Inch Wet Concrete Diamond Core Drill Bit - Does not come with a pilot bit. This core bit is used for wet drilling on cured concrete with hard aggregate and medium to heavy steel reinforcement, and asphalt overlay on concrete. Use wet only. 10 mm segment height, 33mm segment width, 5/8″-11mm arbor. 14″ tube length.

 

Cayken 10 Diamond Core Drill Rig 58HP 435W With Adjustable Angle Stand For Drilling Reinforced Concrete Or Brick

Cayken 10″ Diamond Core Drill Rig 5.8HP 435W With Adjustable Angle Stand For Drilling Reinforced Concrete Or Brick

Cayken 10″ Diamond Core Drill Rig 5.8HP 435W With Adjustable Angle Stand For Drilling Reinforced Concrete Or Brick - 1/4 -inch water valve for wet drilling. Four (4) adjustable slide bearings. For use on concrete, brick, stone, rock, ceramic, and fireproof materials. The ck-kcy-2550-200f has a 5. 4. Drill features safety clutch and overload protection. This drill will cut up to 10-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Will cut up to 10-inch diameter holes. Package includes wrench set, two (2) motor brushes, and 1/4-inch water valve with shut off. X 7 tpi. X 7 tpifeaturesdesigned for wet or dry core drilling. Weight 34 lbs. 5-inch rolling wheels. Top and rear handles. 8 hp, 110 v, 60 hz, 435 w, 580 rpm. Includes wrench set. Cayken 10″ diamond core drill rig 5. Four (4) leveling bolts on base. Spline is 1-1/4 in. Drill specificationsmotor specs 5. Ce/rohs/iso90001 certified. 8 hp, 435 w motor. Reversible slide handle for dual-side operation. Larger mast designed to accommodate large-diameter bits and withstand high torque. Spline 1-1/4 in. Stand specificationsadjustable aluminum stand for drilling at 0 to 45 degrees. Built-in leveling bubble. Angle/vertical position locks. Soft start electronic current limiterincludes wrench set. 8hp 435w with adjustable angle stand for drilling reinforced concrete or brickthe cayken ck-kcy-2550-200f is designed for wet or dry core drilling and comes with the cayken 200 adjustable aluminum stand. Drill bit not included.

 

2 DAMO DryWet Diamond Core Drill Bit for ConcreteGraniteStoneHole Saw

2″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw

2″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw - , they provide the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. They fit on high-speed angle grinders with a 5/8″ -11 spindle. Adopting the vacuum brazed tech. You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8″ shank. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. Available in 1/4″,3/8″,1/2″,3/4″,1″, 1-1/4″, 1-3/8″,1-1/2″,1-3/4″,2″and 2-1/2″ sizes. Although damo dry / wet core bits are designed for use on the job site without using water,wet cutting is recommended whenever possible. They can be used to drill the faucet-mounting holes in countertops and vanities.

 

uxcell 6mm 14 Diameter Ceramic Tile Glass Metal Hole Saw Diamond Core Drill Bit

uxcell 6mm 1/4″ Diameter Ceramic Tile Glass Metal Hole Saw Diamond Core Drill Bit

uxcell 6mm 1/4″ Diameter Ceramic Tile Glass Metal Hole Saw Diamond Core Drill Bit - Designed for drilling 1/4″ diameter holes. Diamond coated tip and sturdy metal body, gives good performance and longer life. Works better with an electric drill which is not included here. Used on glass, ceramic, porcelain, tile, limestone, slate, marble, granite, stone, and fiberglass.

 

Cayken Handheld 5 Diamond Core Drill Rig 25HP 1900W Drill Reinforced Concrete or Brick 2 Gear Variable Speed 132MM

Cayken Handheld 5″ Diamond Core Drill Rig 2.5HP 1900W Drill Reinforced Concrete or Brick, 2 Gear, Variable Speed 132MM

Cayken Handheld 5″ Diamond Core Drill Rig 2.5HP 1900W Drill Reinforced Concrete or Brick, 2 Gear, Variable Speed 132MM - 5 hp, 110 v, 60 hz, 1,900 w, variable speed with two gears (700-1,200 rpm and 1,050-1,750 rpm). Spline is 5/8 in. X 11 tpispline adapter 5/8 in. Drill features safety clutch and overload protection. 5hp 1900w drill reinforced concrete or brick, 2 gear, variable speed 132mmthe cayken ck-scy-18-2ebm is designed for wet or dry core drilling. X 11 tpi box to 1-1/4 in. Will cut up to 5-inch diameter holes. X 7 tpi maleweight 11 lbs. Featuresdesigned for wet or dry core drilling. Ce/rohs/iso90001 certified. Stepless speed regulation. Specificationsbrick drilling range 5 in. 1/4-inch water valve for wet drilling. Brick drilling range is 5 in. 5 hp motor with two (2) gears. Motor specs 2. Soft start electronic current limiterincludes carrying case and wrench. Package includes carrying case, wrench, two (2) motor brushes, and 1/4-inch water valve with shut off. X 11 tpi. Concrete drilling range 3 in. Cayken handheld 5″ diamond core drill rig 2. Spline 5/8 in. For use on concrete, brick, stone, rock, ceramic, and fireproof materials. This drill will cut up to 5-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. The ck-scy-18-2ebm has a variable-speed, 2. Concrete drilling range is 3 in. Drill bit not included.

 

1 DAMO DryWet Diamond Core Drill Bit for ConcreteGraniteStoneHole Saw

1″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw

1″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw - , They provide the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. They fit on high-speed angle grinders with a 5/8″ -11 spindle. You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8″ shank. They can be used to drill the faucet-mounting holes in countertops and vanities. Available in 1/4″,3/8″,1/2″,3/4″,1″, 1-1/4″, 1-3/8″,1-1/2″,1-3/4″,2″and 2-1/2″ sizes. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. Although damo dry / wet core bits are designed for use on the job site without using water,wet cutting is recommended whenever possible. Adopting the vacuum brazed tech. .

 

38 Diamond Core Drill Bit For Glass and Tile  Put 2 in Your Cart Get the Third FREE  Free Beginners Drilling Guide  Youll Drill Glass and Tile  Free Shipping  100  Money Back Guarantee

3/8″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee

3/8″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee - Free shipping in the us no risk, 100% money back guarantee. You’ll make wine bottle lamps, lighted glass block, bird feeders and more. Easy, use your kitchen scrubbing sponge to hold the glass and cool the bit we’ll show you how. 3/8″ diamond core bit for glass and tile fits your hand drill or drill press. Free 4 page drilling instruction guide free 5 page decorating ideas guide.

 

34 Inch 193 mm DiamondSure Diamond Core Drill Bit Hole Saw for Glass Tile Granite Ceramic Porcelain Stone

3/4″ Inch 19.3 mm DiamondSure Diamond Core Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone

3/4″ Inch 19.3 mm DiamondSure Diamond Core Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone - Tip lubrication hole provides optimum tip lubrication by allowing water flow in and out of bit. Grooved tip edge provides maximum surface area & increases water “churn” for tip lubrication. Bonded diamond grit electroplate bonded diamonds for optimum diamond life. Core extraction hole special holes in back of the “bell” allow easy removal of cores or plugs. Nickel plated reduces bit friction and heat build-up and inhibits rust.

 

12 DAMO DryWet Diamond Core Drill Bit for ConcreteGraniteStoneHole Saw

1/2″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw

1/2″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw - They fit on high-speed angle grinders with a 5/8″ -11 spindle. You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8″ shank. They can be used to drill the faucet-mounting holes in countertops and vanities. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. Although damo dry / wet core bits are designed for use on the job site without using water,wet cutting is recommended whenever possible. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. , They provide the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop. We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. Available in 1/4″,3/8″,1/2″,3/4″,1″, 1-1/4″, 1-3/8″,1-1/2″,1-3/4″,2″and 2-1/2″ sizes. Adopting the vacuum brazed tech.

 

12 Diamond Core Drill Bit For Glass and Tile  Put 2 in Your Cart Well ship the 3rd FREE  Free Beginners Drilling Guide  Drill Glass Tile Wine Bottles Glass Block

1/2″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, We’ll ship the 3rd FREE | Free Beginner’s Drilling Guide | Drill Glass, Tile, Wine Bottles, Glass Block

1/2″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, We’ll ship the 3rd FREE | Free Beginner’s Drilling Guide | Drill Glass, Tile, Wine Bottles, Glass Block - Free shipping in the us no risk, 100% money back guarantee. Free 4 page drilling instruction guide free 5 page decorating ideas guide. You’ll make wine bottle lamps, lighted glass block, bird feeders and more. 1/2″ diamond core bit for glass and tile buy 2 get the 3rd one free. Easy, use your kitchen scrubbing sponge to hold the glass and cool the bit we’ll show you how.

 

1-38 Dry Diamond Core Drill Bit - Granite Marble Hole Saws

1-3/8″ Dry Diamond Core Drill Bit – Granite Marble Hole Saws

1-3/8″ Dry Diamond Core Drill Bit – Granite Marble Hole Saws - This dry core bit also has impregnated with silicon carbide electroplated on the outside of tube ideal for beveling and eliminates pinching and heat build up. For dry cutting. Core bit intended for drilling on granite, marble and similar materials. Full range of sizes for virtually any job. Specially formulated supreme quality segments provide smooth and clean cutting in granite, marble and similar materials. . 1-3/8″ tube length to hold up under extreme heat and cutting pressure.

 

Steel Dragon Tools 85D Wet Dry Hand Held Core Drill Rig for Diamond Core Drill Bits

Steel Dragon Tools 85D Wet & Dry Hand Held Core Drill Rig for Diamond Core Drill Bits

Steel Dragon Tools 85D Wet & Dry Hand Held Core Drill Rig for Diamond Core Drill Bits - Fits 1-1/4 in. One (1) year warranty against manufacturer defects. Motor 2,000 w, 115 v, 60 hz, 2,000 rpmincludes dual spline with adapter. X 11. Includes tubing for use in wet drilling. Ergonomic design with movable handle. Includes plastic carrying case. Weight 17 lbs. A 13/16-inch adapter is also included. Fits 13/16 in. Steel dragon tools® 85d wet & dry hand held core drill rig for diamond core drill bitsthe steel dragon tools® 85d is a powerful and portable hand-held core drill. Bits with adapter. X 11 tpi bits. Water inlet 1/4-inch, ribbed inlet with brass ball valve. 9-foot power cord with grounded plug. Specificationsdrills up to 5-inch holes in concrete, asphalt, block, brick, and more. X 7 and 5/8 in. Equipped with a 2,000-watt motor spinning at 2,000 rpm, the sdt-85d drills up to 5-inch holes in concrete, asphalt, block, brick, and more. Fits 5/8 in. This core drill comes with a dual spline that accepts 1-1/4 in. X 7 tpi bits.

 

OrangeA Diamond Core Drilling Machine 10 Inch 255mm Diamond Core Drill Rig with Stand Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring 255mm

OrangeA Diamond Core Drilling Machine 10 Inch 255mm Diamond Core Drill Rig with Stand Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (255mm)

OrangeA Diamond Core Drilling Machine 10 Inch 255mm Diamond Core Drill Rig with Stand Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (255mm) - The cooling water connection also makes it works more sturdily. Diamond core drill has adjustable stand and features safety clutch and overload protection. Diamond core drill rig can cut holes up to 255mm(10 inch) in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Powerful 4150 watt motor delivers extra torque for the toughest drilling jobs. Maxdrilling diameter 255mm/8 inch, rated power 4150w speed 520 r / min.

 

Concord Blades CBW02000SP 2 Inch Wet Concrete Diamond Core Drill Bit

Concord Blades CBW02000SP 2 Inch Wet Concrete Diamond Core Drill Bit

Concord Blades CBW02000SP 2 Inch Wet Concrete Diamond Core Drill Bit - Does not come with a pilot bit. This core bit is used for wet drilling on cured concrete with hard aggregate and medium to heavy steel reinforcement, and asphalt overlay on concrete. Use wet only. 10 mm segment height, 35mm segment width, 1-1/4″ -7mm arbor. 14″ tube length.

 

916 Diamond Core Drill Bit For Glass and Tile  Put 2 in Your Cart Get the Third FREE  Free Beginners Drilling Guide  Youll Drill Glass and Tile  Free Shipping  100  Money Back Guarantee

9/16″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee

9/16″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee - You’ll make wine bottle lamps, lighted glass block, bird feeders and more. 9/16″ diamond core bit for glass and tile fits your hand drill or drill press. Free 4 page drilling instruction guide free 5 page decorating ideas guide. Free shipping in the us no risk, 100% money back guarantee. Easy, use your kitchen scrubbing sponge to hold the glass and cool the bit we’ll show you how.

 

58 Diamond Core Drill Bit For Glass and Tile  Put 2 in Your Cart Get the Third FREE  Free Beginners Drilling Guide  Youll Drill Glass and Tile  Free Shipping  100  Money Back Guarantee

5/8″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee

5/8″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee - Free 4 page drilling instruction guide free 5 page decorating ideas guide. Free shipping in the us no risk, 100% money back guarantee. 5/8″ diamond core bit for glass and tile fits your hand drill or drill press. You’ll make wine bottle lamps, lighted glass block, bird feeders and more. Easy, use your kitchen scrubbing sponge to hold the glass and cool the bit we’ll show you how.

 

Cayken Handheld Diamond Core Drill Rig With 2 Gear Speeds Cuts Holes Up To 6

Cayken Handheld Diamond Core Drill Rig With 2 Gear Speeds Cuts Holes Up To 6″

Cayken Handheld Diamond Core Drill Rig With 2 Gear Speeds Cuts Holes Up To 6″ - Drill features quick connect water valve with shut off. Package includes carrying case, wrench, allen wrench, motor brushes, water tube. For use on brick, stone, reinforced concrete, ceramic, and fireproof materials. Brick drilling range 6 in. Handheld diamond core drill rig designed for wet or dry drilling.