23 Greatest Walton Tap Extractors for 2019

 

Walton Replacement Finger for 4 Flute Tap Extractor 12 Size #ad

Walton Replacement Finger for 4 Flute Tap Extractor, 1/2″ Size

Walton Replacement Finger for 4 Flute Tap Extractor, 1/2″ Size #ad - Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Made of hardened steel to help prevent the damage of the workpieces threads. For removing machine screws and broken hand taps. Replacement finger for walton 4 flute, tap extractors.

 

Walton Tools 18001 Tap Extractor Set #ad

Walton Tools 18001 Tap Extractor Set

Walton Tools 18001 Tap Extractor Set #ad - The hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. 3/16 inch-1/2 inch. 4 flute design. Replacement flutes available.

 

Walton Replacement Finger for 4 Flute Tap Extractor 716 Size #ad

Walton Replacement Finger for 4 Flute Tap Extractor, 7/16″ Size

Walton Replacement Finger for 4 Flute Tap Extractor, 7/16″ Size #ad - Made of hardened steel to help prevent the damage of the workpieces threads. For removing machine screws and broken hand taps. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Replacement finger for walton 4 flute, tap extractors.

 

Walton 20124 18 4 Flute Pipe NPT Tap Extractor With Square Shank #ad

Walton 20124 1/8″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank

Walton 20124 1/8″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank #ad - All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For pipe taps. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged.

 

Walton 30043 4 3 Flute STI Tap Extractor With Square Shank #ad

Walton 30043 #4, 3 Flute STI Tap Extractor With Square Shank

Walton 30043 #4, 3 Flute STI Tap Extractor With Square Shank #ad - For helical coil wire screw thread insert taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10063 6 3 Flute Tap Extractor With Square Shank #ad

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank #ad - When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps.

 

Walton 20504 12 4 Flute Pipe NPT Tap Extractor With Square Shank #ad

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank #ad - When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. For pipe taps.

 

Walton 10062 6 2 Flute Tap Extractor With Square Shank #ad

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 18001-2 6 Piece 2 Flute Tap Extractor Set With Square Shank #ad

Walton 18001-2 6 Piece 2 Flute Tap Extractor Set With Square Shank

Walton 18001-2 6 Piece 2 Flute Tap Extractor Set With Square Shank #ad - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Packed in 6-compartment plastic case. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. 6 piece set contains sizes 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″.

 

Walton 11004 1 4 Flute Tap Extractor With Square Shank #ad

Walton 11004 1″, 4 Flute Tap Extractor With Square Shank

Walton 11004 1″, 4 Flute Tap Extractor With Square Shank #ad - When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 10124 12 4 Flute Tap Extractor With Square Shank #ad

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank #ad - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps.

 

Walton 10103 10 3 Flute Tap Extractor With Square Shank #ad

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 30434 716 4 Flute STI Tap Extractor With Square Shank #ad

Walton 30434 7/16″, 4 Flute STI Tap Extractor With Square Shank

Walton 30434 7/16″, 4 Flute STI Tap Extractor With Square Shank #ad - When fingers become bent or broken or are too short for further use, replacement fingers are available. For helical coil wire screw thread insert taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10564 916 4 Flute Tap Extractor With Square Shank #ad

Walton 10564 9/16″, 4 Flute Tap Extractor With Square Shank

Walton 10564 9/16″, 4 Flute Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank #ad

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank #ad - Packed in 6-compartment plastic case. For removing machine screws and broken hand taps. 5 piece set contains sizes 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10102 10 2 Flute Tap Extractor With Square Shank #ad

Walton 10102 #10, 2 Flute Tap Extractor With Square Shank

Walton 10102 #10, 2 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank #ad

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank #ad - Packed in 15-compartment plastic case. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. 13 piece set contains sizes #4, #5, #6, #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″.

 

Walton 20254 14 4 Flute Pipe NPT Tap Extractor With Square Shank #ad

Walton 20254 1/4″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank

Walton 20254 1/4″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank #ad - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. For pipe taps. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 10284 932 4 Flute Tap Extractor With Square Shank #ad

Walton 10284 9/32″, 4 Flute Tap Extractor With Square Shank

Walton 10284 9/32″, 4 Flute Tap Extractor With Square Shank #ad - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps.

 

Walton 10624 58 4 Flute Tap Extractor With Square Shank #ad

Walton 10624 5/8″, 4 Flute Tap Extractor With Square Shank

Walton 10624 5/8″, 4 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 10042 4 2 Flute Tap Extractor With Square Shank #ad

Walton 10042 #4, 2 Flute Tap Extractor With Square Shank

Walton 10042 #4, 2 Flute Tap Extractor With Square Shank #ad - For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 10253 14 3 Flute Tap Extractor With Square Shank #ad

Walton 10253 1/4″, 3 Flute Tap Extractor With Square Shank

Walton 10253 1/4″, 3 Flute Tap Extractor With Square Shank #ad - When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 10064 6 4 Flute Tap Extractor With Square Shank #ad

Walton 10064 #6, 4 Flute Tap Extractor With Square Shank

Walton 10064 #6, 4 Flute Tap Extractor With Square Shank #ad - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.