22 Top Michigan Drills

 

Michigan Drill 700C Series Cobalt Steel Square Tool Bit Ground Finish 12 Size 8 Length

Michigan Drill 700C Series Cobalt Steel Square Tool Bit, Ground Finish, 1/2″ Size, 8″ Length

Michigan Drill 700C Series Cobalt Steel Square Tool Bit, Ground Finish, 1/2″ Size, 8″ Length - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Both ends beveled 10 degrees. Ground finish suitable for most materials. Square tool bit. 8-inches length.

 

Michigan Drill 208A Series High-Speed Steel Extra Long Drill Bit Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point 1164 Size Pack of 1

Michigan Drill 208A Series High-Speed Steel Extra Long Drill Bit, Bright Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 11/64″ Size (Pack of 1)

Michigan Drill 208A Series High-Speed Steel Extra Long Drill Bit, Bright Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 11/64″ Size (Pack of 1) - Round shanks allow use with a wide variety of tool holding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 11/64-inches size.

 

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit Round Shank Spiral Flute 118 Degrees Conventional Point 1-964 Size Pack of 1

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1-9/64″ Size (Pack of 1)

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1-9/64″ Size (Pack of 1) - 1/2 inches standard shank diameter. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Comes with 1-9/64-inches size.

 

Michigan Drill 212M Series High-Speed Steel Extra-Long Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 13mm Size 12 Length Pack of 1

Michigan Drill 212M Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 13mm Size, 12″ Length (Pack of 1)

Michigan Drill 212M Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 13mm Size, 12″ Length (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Long length for extra reach ideal for deep hole drilling. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available in ground finish.

 

Michigan Drill 218 Series High-Speed Steel Extra-Long Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 532 Size 18 Length Pack of 1

Michigan Drill 218 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/32″ Size, 18″ Length (Pack of 1)

Michigan Drill 218 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/32″ Size, 18″ Length (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. For general purpose drilling in applications where extra reach is required. Round shanks allow use with a wide variety of toolholding systems. Available in ground finish. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Michigan Drill 208B Series High-Speed Steel Extra Long Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 38 Size Pack of 1

Michigan Drill 208B Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 3/8″ Size (Pack of 1)

Michigan Drill 208B Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 3/8″ Size (Pack of 1) - Round shanks allow use with a wide variety of tool holding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 118 degrees conventional point. 3/8-inches size. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Michigan Drill 307R 15 Piece High-Speed Steel Jobber Length Drill Bit Set Black Oxide Finish Round Shank Spiral Flute 118 Degrees Conventional Point Pack of 1

Michigan Drill 307R 15 Piece High-Speed Steel Jobber Length Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point (Pack of 1)

Michigan Drill 307R 15 Piece High-Speed Steel Jobber Length Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point (Pack of 1) - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Set includes 1/16-inches to 1/2-inches sizes in metal case.

 

Michigan Drill 703C P1 Super Cobalt Steel P Type Cut-Off Blade T-Shaped 4-12 Length x 116 Width x 12 Height

Michigan Drill 703C P1 Super Cobalt Steel “P” Type Cut-Off Blade, T-Shaped, 4-1/2″ Length x 1/16″ Width x 1/2″ Height

Michigan Drill 703C P1 Super Cobalt Steel “P” Type Cut-Off Blade, T-Shaped, 4-1/2″ Length x 1/16″ Width x 1/2″ Height - Increased clearance angles on each side of the blade reduces friction. Available in t-shaped style. Produces a chip narrower than the blade itself and is suited for cutting off, grooving and similar operations. The narrow design conserves material being cut and reduces the heat generated when cutting. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 2 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 2532 Size Pack of 1

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 25/32″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 25/32″ Size (Pack of 1) - Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 25/32-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 118 degrees conventional point. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Michigan Drill 789 Series High-Speed Steel Machine Screw Combined Tap and Drill Bit Uncoated Bright Finish Round with Square End 2 Spiral Flute 4-40 Ground Thread

Michigan Drill 789 Series High-Speed Steel Machine Screw Combined Tap and Drill Bit, Uncoated (Bright) Finish, Round with Square End, 2 Spiral Flute, 4-40 Ground Thread

Michigan Drill 789 Series High-Speed Steel Machine Screw Combined Tap and Drill Bit, Uncoated (Bright) Finish, Round with Square End, 2 Spiral Flute, 4-40 Ground Thread - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available with 2 spiral flute. Also can be used on multiple spindle heads with reversing mechanisms. Comes with 1-15/16-inches length. Designed to drill and tap thru holes in a single pass up to two times the tap diameter.

 

Michigan Drill 355 Series High-Speed Steel Jobber Length Step Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Point 8-32 Screw Size Pack of 1

Michigan Drill 355 Series High-Speed Steel Jobber Length Step Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 8-32 Screw Size (Pack of 1)

Michigan Drill 355 Series High-Speed Steel Jobber Length Step Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 8-32 Screw Size (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. For screw size 8-32. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit Round Shank Spiral Flute 118 Degrees Conventional Point 1-3164 Size Pack of 1

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1-31/64″ Size (Pack of 1)

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1-31/64″ Size (Pack of 1) - Comes with 1-31/64-inches size. 1/2 inches standard shank diameter. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 732 Size 12 Length Pack of 1

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 7/32″ Size, 12″ Length (Pack of 1)

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 7/32″ Size, 12″ Length (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Long length for extra reach ideal for deep hole drilling. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available in ground finish. Round shanks allow use with a wide variety of toolholding systems.

 

Michigan Drill 301 Series High-Speed Steel Jobber Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Point 1525mm Size Pack of 1

Michigan Drill 301 Series High-Speed Steel Jobber Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Point, 15.25mm Size (Pack of 1)

Michigan Drill 301 Series High-Speed Steel Jobber Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Point, 15.25mm Size (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. Ground finish suitable for most materials. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Flute to oal for maximum rigidity ground to ansi specifications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit 3 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1-932 Size Pack of 1

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-9/32″ Size (Pack of 1)

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-9/32″ Size (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 1-9/32-inches size. 118 degrees conventional point. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.

 

Michigan Drill AR5 Carbide Tipped Straight Turning Tool Bit Right Hand 516 Square Shank 2-14 Length

Michigan Drill AR5 Carbide Tipped Straight Turning Tool Bit, Right Hand, 5/16″ Square Shank, 2-1/4″ Length

Michigan Drill AR5 Carbide Tipped Straight Turning Tool Bit, Right Hand, 5/16″ Square Shank, 2-1/4″ Length - Michigan drill carbide tipped straight turning tool bit for turning on the outside of the part. Designed to use with right hand. Ideal for c-5/c-6 steel and ferrous materials. 2-1/4-inches length.

 

Michigan Drill 600 Series High-Speed Steel Screw Machine Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point K Letter Size Pack of 6

Michigan Drill 600 Series High-Speed Steel Screw Machine Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, K Letter Size (Pack of 6)

Michigan Drill 600 Series High-Speed Steel Screw Machine Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, K Letter Size (Pack of 6) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of tool holding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. It is often used in screw machine set-ups where spindle clearance is limited. High speed steel screw machine length drill bit are good for most general purpose applications.

 

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 2764 Size Pack of 1

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 27/64″ Size (Pack of 1)

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 27/64″ Size (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 27/64-inches size. Round shanks allow use with a wide variety of tool holding systems. 118 degrees conventional point.

 

Michigan Drill 212C Series Cobalt Steel Extra-Long Length Drill Bit Gold Oxide Finish Round Shank Spiral Flute 135 degrees Split Point 58 Size 12 Length Pack of 1

Michigan Drill 212C Series Cobalt Steel Extra-Long Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 degrees Split Point, 5/8″ Size, 12″ Length (Pack of 1)

Michigan Drill 212C Series Cobalt Steel Extra-Long Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 degrees Split Point, 5/8″ Size, 12″ Length (Pack of 1) - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems. 135 degrees split point for nonslip starting on hard materials.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 3 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1516 Size Pack of 1

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 15/16″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 15/16″ Size (Pack of 1) - 118 degrees conventional point. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 15/16-inches size.

 

Michigan Drill 212M Series High-Speed Steel Extra-Long Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 12mm Size 12 Length Pack of 1

Michigan Drill 212M Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 12mm Size, 12″ Length (Pack of 1)

Michigan Drill 212M Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 12mm Size, 12″ Length (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Long length for extra reach ideal for deep hole drilling. Round shanks allow use with a wide variety of toolholding systems. Available in ground finish.

 

Michigan Drill 212X Series High-Speed Steel Reduced Shank Drill Bit Ground Finish 12 Round Shank Spiral Flute 118 Degrees Conventional Point 58 Size 12 Length Pack of 1

Michigan Drill 212X Series High-Speed Steel Reduced Shank Drill Bit, Ground Finish, 1/2″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/8″ Size, 12″ Length (Pack of 1)

Michigan Drill 212X Series High-Speed Steel Reduced Shank Drill Bit, Ground Finish, 1/2″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/8″ Size, 12″ Length (Pack of 1) - 1/2-inches diameter reduced shank for 1/2-inches capacity chucks. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Available in ground finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.