22 Most Wanted Square Nose End Mills for 2020

 

CGC Tools GMA14F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum Flat End 3 Flute 14 Diameter 34 LOC 2-12 OAL #ad

CGC Tools GMA14F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools GMA14F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL #ad - Engineered to repel aluminum for roughing and finishing of non-ferrous materials, high velocity, high material removal rate. Usa, silverback, flat, 3 flute, 1/4″ diameter, 3/4″ length of cut, 2-1/2″ overall length. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable.

 

Niagara Cutter N46890 Cobalt Steel Square Nose End Mill Weldon Shank TiCN Finish Finishing Cutting Non-Center 30-Degree 4-Flute 325 OAL 0500 Cut Diameter 0500 Shank Diameter #ad

Niagara Cutter N46890 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Finishing Cutting, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter

Niagara Cutter N46890 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Finishing Cutting, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter #ad - Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating. Non-center-cutting design supports peripheral milling and finishing. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Square nose end mills (also called square end) create sharp, unrounded cuts. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.

 

CGC Tools CEM18F4TIALN Primate Square Nose End Mill TiAlN Coating 4 Flute 18 Diameter 12 LOC 1-12 OAL #ad

CGC Tools CEM18F4TIALN Primate Square Nose End Mill, TiAlN Coating, 4 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL

CGC Tools CEM18F4TIALN Primate Square Nose End Mill, TiAlN Coating, 4 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL #ad - This weapon of mass production destroy any competition. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Usa, flat, 4 flute, 1/8” diameter, 1/2” length of cut, 1-1/2” overall length, tialn coating. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.

 

Melin Tool CC Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish 30 Deg Helix 4 Flutes 33750 Overall Length 05313 Cutting Diameter 05 Shank Diameter #ad

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750″ Overall Length, 0.5313″ Cutting Diameter, 0.5″ Shank Diameter

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750″ Overall Length, 0.5313″ Cutting Diameter, 0.5″ Shank Diameter #ad - 30 degree helix angle. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc.

 

Niagara Cutter N45061 High Speed Steel Square Nose End Mill Weldon Shank Uncoated RoughingFinishing Cut Non-Center 30-Degree 4-Flute 325 OAL 0188 Cut Diameter 0375 Shank Diameter #ad

Niagara Cutter N45061 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.188″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N45061 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.188″ Cut Diameter, 0.375″ Shank Diameter #ad - High-speed steel is compatible with a variety of materials. Four flutes produce a better finish than fewer flutes. Square nose end mills (also called square end) create sharp, unrounded cuts. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Double-end end mills have cutting edges on both ends for longer tool life.

 

Precision Twist E6302 Carbide Square Nose End Mill Long Reach Uncoated Bright Finish Roughing Cut 30 Deg Helix 2 Flutes 3 Overall Length 316 Cutting Diameter 316 Shank Diameter #ad

Precision Twist E6302 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Roughing Cut, 30 Deg Helix, 2 Flutes, 3″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter

Precision Twist E6302 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Roughing Cut, 30 Deg Helix, 2 Flutes, 3″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter #ad - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Extra-long length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Niagara Cutter N52182 Cobalt Steel Square Nose End Mill Inch Weldon Shank Uncoated Bright Finish Finishing Cut 30 Degree Helix 4 Flutes 3375 Overall Length 0563 Cutting Diameter 0500 Shank Diameter #ad

Niagara Cutter N52182 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.375″ Overall Length, 0.563″ Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N52182 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.375″ Overall Length, 0.563″ Cutting Diameter, 0.500″ Shank Diameter #ad - Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Melin Tool EMG-M-M Carbide Micro Square Nose End Mill Metric Uncoated Bright Finish 30 Deg Helix 3 Flutes 38mm Overall Length 1mm Cutting Diameter 3mm Shank Diameter #ad

Melin Tool EMG-M-M Carbide Micro Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 38mm Overall Length, 1mm Cutting Diameter, 3mm Shank Diameter

Melin Tool EMG-M-M Carbide Micro Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 38mm Overall Length, 1mm Cutting Diameter, 3mm Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. 30 degree helix angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. General purpose square end.

 

Niagara Cutter N41672 Cobalt Steel Square Nose End Mill Weldon Shank TiCN Finish Roughing and Finishing Cutting 30-Degree 4-Flute 25 OAL 0375 Cut Diameter 0375 Shank Diameter #ad

Niagara Cutter N41672 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 2.5″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N41672 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 2.5″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter #ad - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Truncated rougher-finisher removes material in less time than conventional end mills while producing a finer finish than fine- or coarse-pitch roughers. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Number of flutes varies by diameter for optimum feed and cut rate. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating.

 

DIAOSnx 18 532 316 14 516 38 12 High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools Set of 7 #ad

DIAOSnx 1/8″ 5/32” 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools (Set of 7)

DIAOSnx 1/8″ 5/32” 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools (Set of 7) #ad - Note due to the different measurement methods, the size may have 1-2cm error. Suitable for cnc data processing center, carved, high-speed machines can milling of copper, aluminum, tool steel, cast iron, etc square nose endmills size 1/8” cutter blade diameter=1/8”, shank diameter=1/4”, flute length=7/16”, overall length=2-3/8” 5/32” cutter blade diameter=5/32”, shank diameter=1/4, flute length=1/2”, overall length=2-1/4” 3/16” cutter blade diameter=3/16”, shank diameter=1/4”, flute length=9/16”, overall length=2-1/4” 1/4” cutter blade diameter=1/4”, shank diameter=1/4”, flute length=3/4”, overall length=2-1/3” 5/16” cutter blade diameter=5/16”, shank diameter=5/16””, flute length=7/8”, overall length=2-4/9” 3/8” cutter blade diameter=3/8”, shank diameter=3/8”, flute length=1”, overall length=2-3/4” 1/2” cutter blade diameter=1/2”, shank diameter=1/2”, flute length=1-1/2”,overall length=3-3/8”. Package includes 7×end mill cutter hss-al, 4 flute, straight shank, square nose.

 

YG-1 E5977 Carbide Square Nose End Mill Extra Long Reach TiCN Monolayer Finish Finishing Cut Non-Center Cutting 37 Deg Helix 3 Flutes 4 Overall Length 025 Cutting Diameter 025 Shank Diameter #ad

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter #ad - 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than uncoated tools. Extended-reach neck style provides access to recessed areas of the workpiece. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for high-performance machining on aluminum and other nonferrous materials.

 

Niagara Cutter N61647 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 4 Overall Length 0375 Cutting Diameter 0375 Shank Diameter #ad

Niagara Cutter N61647 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

Niagara Cutter N61647 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter #ad - Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials.

 

Niagara Cutter N41120 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish Roughing and Finishing Cutting 30-Degree 4-Flute 2875 OAL 0375 Cut Diameter 0375 Shank Diameter #ad

Niagara Cutter N41120 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 2.875″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N41120 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 2.875″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter #ad - Designed for turning operations, roughing to medium machining — on aluminum in average machining conditions. Roughing (kr) and medium-machining (km) chipbreaker styles help prevent chip buildup at a range of cutting depths and feed rates. Square shape offers edge strength and is suitable for roughing, facing, interrupted cuts, and large lead angles. Positive single-sided insert with 7-degree clearance angle for light cutting forces and side clearance. H13a uncoated carbide grade provides a balance of hardness and toughness for resistance to wear and shock.

 

Niagara Cutter N85440 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 2 Overall Length 0250 Cutting Diameter 0250 Shank Diameter #ad

Niagara Cutter N85440 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 2″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter

Niagara Cutter N85440 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 2″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter #ad - Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cuttings speeds, offering better heat resistance than tin and ticn coatings. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

CGC Tools CEM14F3TICN Primate Square Nose End Mill TiCN Coating 3 Flute 14 Diameter 34 LOC 2-12 OAL #ad

CGC Tools CEM14F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL #ad - This weapon of mass production destroy any competition. Usa, flat, 3 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length, ticn coating. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.

 

CGC Tools CEM316F3TICN Primate Square Nose End Mill TiCN Coating 3 Flute 316 Diameter 58 LOC 2 OAL #ad

CGC Tools CEM316F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 3/16″ Diameter, 5/8″ LOC, 2″ OAL

CGC Tools CEM316F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 3/16″ Diameter, 5/8″ LOC, 2″ OAL #ad - This weapon of mass production destroy any competition. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable.

 

Wokesi 1mm 15mm 2mm 3mm Cutter DiaPack of 4Std Length4FlutesHRC55TiAlN CoatedMetricSolid CarbideSquare Nose End MillCNC Router Bits Cutting Milling Tools 1mm15mm2mm3mm HRC55 #ad

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55)

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55) #ad - 5package 1 pack of 4 pieces endmill cutter. 3suitable for process alloy,iron and steel under hrc55high performance. 2materialtungsten carbide,high quality tialn coating,getting long tool life. 1contains 4pcs square endmills1pc×1mmdia,1pc×15mmdia,1pc×2mmdia and 1pc×3mmdia. 4high micro hardness,high abrasion resistance,good toughness.

 

Niagara Cutter N61655 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 3 Overall Length 0500 Cutting Diameter 0500 Shank Diameter #ad

Niagara Cutter N61655 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 3″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N61655 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 3″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter #ad - Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Niagara Cutter N35160 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish RoughingFinishing Cut Non-Center 30-Degree 4-Flute 325 OAL 0500 Cut Diameter 05000 Shank Diameter #ad

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter #ad - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills. High-speed steel is compatible with a variety of materials. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Precision Twist E3302 Carbide Square Nose End Mill Uncoated Bright Finish 30 Deg Helix 2 Flutes 2 Overall Length 316 Cutting Diameter 316 Shank Diameter #ad

Precision Twist E3302 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter

Precision Twist E3302 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter #ad - Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for machining steel, hardened steel, steel alloys, stainless steel, cast iron, copper, brass, bronze, aluminum, and aluminum alloys. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Niagara Cutter N61645 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 25 Overall Length 0375 Cutting Diameter 0375 Shank Diameter #ad

Niagara Cutter N61645 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

Niagara Cutter N61645 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter #ad - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications.

 

Niagara Cutter N85267 Carbide Square Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter #ad

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter #ad - Square nose end mills (also called square end) create sharp, unrounded cuts. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.