22 Greatest Lathes

 

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set - Chisels are 10-inch in overall length, with 4-inch blades. Comes in an attractive wooden display box. Premium long lasting hss blades with beautifully turned and stained hardwood handles and brass ferrules. Includes-1/4-inch roughing gouge, 1/8-inch spindle gouge,-1/4-inch round nose scraper, 3/32-inch parting tool,-1/4-inch skew chisel. Fantastic buy for five essential chisels.

 

Shark 70B Clamping Silencer Band for Ammco Fmc Accu-Turn and Other Style Lathes

Shark 70B Clamping Silencer Band for Ammco, Fmc, Accu-Turn and Other Style Lathes

Shark 70B Clamping Silencer Band for Ammco, Fmc, Accu-Turn and Other Style Lathes - Used on bench or on-the car brake lathes of all types, the silencer rides behind the tool bit to meet the vibration and noise where it starts-at the tool itself. Chatter depressing, chip deflecting clamping silencer band for accu-turn, fmc and many other brake lathes. . Long-life pad material will give you long life.

 

SHOP FOX W1704 13-Horsepower Benchtop Lathe

SHOP FOX W1704 1/3-Horsepower Benchtop Lathe

SHOP FOX W1704 1/3-Horsepower Benchtop Lathe - Cast iron construction and infinitely variable speed control. 8-inch swing over bed. 12-inch distance between centers. Includes two tool rests. Motor 1/3 hp, 2 amp, 110v, single-phase, 60 hz.

 

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System - This c series chuck works with all “c” series jaws. Includes #1 step jaws 3/32″ to 1-7/8″ external & 11/32″ to 3-3/8″ internal includes #2 round jaws 1-1/2″ to 3-1/8″ external & 2″ to 3-7/8″ internal. Includes screw chuck also includes an allen wrench and a set of tightening levers. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. Chuck is pre-threaded to 1″ x 8tpi includes 3/4″ x 16tpi adaptor.

 

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for 2 MT

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT - Hollow center for drilling 5/16-inch (#2 mt) through holes (for lamps, etc). Packaged in 2 wood boxes. 1-inch diameter headstock spur center for standard spindles. Live ball bearing tailstock center with cup and point. 5/8-inch diameter headstock spur center for narrow spindles.

 

South Bend Lathe SB1365 Way Oil for Lathes

South Bend Lathe SB1365 Way Oil for Lathes

South Bend Lathe SB1365 Way Oil for Lathes - Won’t gum up. Protects against rust and corrosion. Ensures stickfree.

 

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool - Only 1/16″ thick get a clean, sharp and accurate 90 degree inside angle corner for delicate turnings. . The blade is 1-1/4″ wide and 5″ long with a 4″ wood handle. High speed tenon tool # lcten. A must tool for any pen maker for cutting perfect tenons on pen center bands.

 

20pc 14 Carbide Tip Tipped Cutter Tool Bit Cutting Set For Metal Lathe Tooling

20pc 1/4″ Carbide Tip Tipped Cutter Tool Bit Cutting Set For Metal Lathe Tooling

20pc 1/4″ Carbide Tip Tipped Cutter Tool Bit Cutting Set For Metal Lathe Tooling - Specifications 1/4 10, c-2 grade bits 10, c-6 grade bits for cutting steel”. Bits and ten c-6 grade bits for cutting steel and alloys 1/4″. An exceptional value for carbide lathe tool bits twenty piece set offers. And alloys ships same day if paid for by 4pm pst thanks for looking. Tremendous savings over bits sold individually includes ten c-2 grade.

 

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set - Produces excellent well formed beads you can be proud of. This set includes tools to create 3mm, 6mm, 8mm and 10mm beads. Turn beads like at expert take the mystery and skill out of cutting perfect beads to exact sizes with this 4 piece hss bead cutting chisel set. The tools are about 14″ long with hss blades and hardwood handles. Packaged in an attractive wood carrying case. .

 

Anytime Tools 5 Piece 14 MINI LATHE INDEXABLE CARBIDE INSERT TOOL BIT SET

Anytime Tools 5 Piece 1/4″ MINI LATHE INDEXABLE CARBIDE INSERT TOOL BIT SET

Anytime Tools 5 Piece 1/4″ MINI LATHE INDEXABLE CARBIDE INSERT TOOL BIT SET - 1 piece style “e” for turning, facing, boring, chamfering, threading, and v-grooving. Includes 5 inserts tcmt090204 (replacement available on amazon). 2 pieces style “a” for turning, facing, boring, and chamfering. 2 pieces style “b” for turning, facing, boring, and for lead angles. Hex wrench and 3 replacement hold-down screws.

 

Delta Industrial 46-463 Modular Midi-Lathe Bed Extension

Delta Industrial 46-463 Modular Midi-Lathe Bed Extension

Delta Industrial 46-463 Modular Midi-Lathe Bed Extension - Modular design allows you to connect multiple extensions. Delta recommends the use of no more than 2 extensions total. 2 extensions = 67-1/2-inch of length between centers. Midi-lathe bed extension adds an additional 25-1/2-inch of length between centers to accommodate longer turning applications. 1 extension = 42-inch of length between centers.

 

NOVA 46301 Comet II Variable Speed Midi Lathe with Free G3 Chuck 12 x 165 NOVA Silver

NOVA 46301 Comet II Variable Speed Midi Lathe with Free G3 Chuck, 12″ x 16.5″, NOVA Silver

NOVA 46301 Comet II Variable Speed Midi Lathe with Free G3 Chuck, 12″ x 16.5″, NOVA Silver - Swing over bed 12″. 3″ faceplate, handwheel unit, 6″ toolrest, spur-drive center, live tailstock center, knockout bar, manual with parts breakdown and fasteners. 250-4000rpm, 1″x8tpi rh, 2mt hollow. Distance between centers 165″. 3/4hp 120v single phase, 60hz variable speed. 3″ faceplate, handwheel unit, 6″ tool rest, spur-drive center, live tailstock center, knockout bar, manual with parts breakdown and fasteners.

 

Rikon Mini-Lathe Replacement Drive Belt

Rikon Mini-Lathe Replacement Drive Belt

Rikon Mini-Lathe Replacement Drive Belt - Eliminates the need to purchase a separate new chuck for blank drilling. Inexpensive and accurate. Converts your existing chuck fast and easy. Will hold a large variety of blank sizes depending on which chuck you attach these jaws.

 

PSI Woodworking LSR3 Wood Lathe Steady Rest

PSI Woodworking LSR3 Wood Lathe Steady Rest

PSI Woodworking LSR3 Wood Lathe Steady Rest - Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2″. 3-point ball bearing spindle support. Compatible with jet, delta, and turncrafter pro midi lathes with extension beds. Mounts in the channel of any split bed or double rail lathe. Non marring soft wheels.

 

12hp 40 Inch 4 Speed Power Wood Turning Lathe 14x40 In

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14×40 In

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14×40 In - Motor, 350 watt, 1400 rpm, 110 volt ac, mounted to headstock. Spindle speeds 810 rpm to 3400 rpm. Overall measurements, 1457″ high, 945″ wide, 5905″ long. Wood lathes turning capacity 14″ maximum diameter over bed 40″ maximum between centers. Wood lathe pulley system, four speed, v belts.

 

Delta Industrial 46-460 12-12-Inch Variable-Speed Midi Lathe

Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe

Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe - Large 12-1/2-inch swing capacity provides the largest capacity in its class. Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life. Forward and reversing function allows the turner to achieve a superior finish sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Powerful 1 hp max, 1,725 rpm motor. Electronic variable speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position.

 

Triton Industrial Tools 5 Pc Premium HSS 60° Center Drill Combined Drill Countersink Lathe Tool Set

Triton Industrial Tools 5 Pc Premium HSS 60° Center Drill Combined Drill & Countersink Lathe Tool Set

Triton Industrial Tools 5 Pc Premium HSS 60° Center Drill Combined Drill & Countersink Lathe Tool Set - & countersink lathe tool set. Triton industrial tools 5 pc premium hss 60° center drill combined drill.

 

Uxcell CNC Lathe HSS Square Cutting Tool Bits Bar 4 Piece 8mm x 8mm x 200mm

Uxcell CNC Lathe HSS Square Cutting Tool Bits Bar, 4 Piece, 8mm x 8mm x 200mm

Uxcell CNC Lathe HSS Square Cutting Tool Bits Bar, 4 Piece, 8mm x 8mm x 200mm - Used for fabrication of cutting tools for milling, turning, parting, engraving, drilling, punching, etc. Product name lathe hss tool bit material hss. High speed steel tool bit for lathe. Parallelogram design.

 

Shop Fox D4088 Lathe Attachment for Drill Press

Shop Fox D4088 Lathe Attachment for Drill Press

Shop Fox D4088 Lathe Attachment for Drill Press - Easy setup means quick change over from drill press mode to lathe mode. . Perform vertical spindle turning on your multi-speed drill press with this lathe attachment. A 12-inch tool rest allows a maximum work piece length of 24-inch when the work piece is reversed.

 

2 Axis Digital Readout Dro for Milling Lathe Machine with Precision Linear Scale

2 Axis Digital Readout Dro for Milling Lathe Machine with Precision Linear Scale

2 Axis Digital Readout Dro for Milling Lathe Machine with Precision Linear Scale - Slim linear encoder in stock, please contact if you request. It is compete dro kits with parts for mounting. Please leave a massage what travel length do you request and what machine do you install on. The linear scale must choose from 50-1000mm travel length, for over 1000mm ,it cost extra. This order includes 2 pieces 5 micron linear scale and 1 pieces 2 axis dro.

 

Grizzly H3404 Cupped Live Center for Wood Lathe MT2

Grizzly H3404 Cupped Live Center for Wood Lathe, MT2

Grizzly H3404 Cupped Live Center for Wood Lathe, MT2 - Cupped centers provide better grip and prevent splitting. Size mt #2. All ball bearing construction results in very little turning resistance even when loaded.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System

PSI CSC2000C Barracuda Wood Lathe Chuck System

PSI CSC2000C Barracuda Wood Lathe Chuck System - Includes #1 step jaws- for dowels 1/32″ to 1-1/2″, holes 11/16″to 3-1/8″. Includes four(4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1″ x 8 tpi, and has an adapter for 3/4″ x 16 tpi spindles. Includes #2 round jaws, for dowels1-1/2″ to 2-7/8″, holes 2″ to 3-1/2″. Includes #3 round jaws, external grip 3-1/16″, 4-1/2″. Includes pin jaws which hold inside holes 1″, 2-1/2″, and a screw chuck.