22 Best and Coolest Beam Clamps

 

17 Steel I-Beam Clamp - Climbing Rope EA

17″ Steel I-Beam Clamp – Climbing Rope (EA)

17″ Steel I-Beam Clamp – Climbing Rope (EA) - 1/4 with 3/8 hex nut and u bolt (stock thickness). Manufacturer’s number rp2785eg. Store sku 3407509. 3-3/8 x 1-5/8 x 13/16 to 1-5/8 x 1-5/8 od. Develops upper and lower body strength.

 

Halex 96560 14-20 Steel Beam Clamp

Halex 96560 1/4-20 Steel Beam Clamp

Halex 96560 1/4-20 Steel Beam Clamp - Easy to use. The product is 1″ unit stl beam clamp. Made from steel. Eliminates the need to drill a hole through the beam. Use to secure conduit to a metal beam. Beam clamp. The product is manufactured in china. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod.

 

Allied Tube&Conduit RP2785EG Strut U-Bolt Beam Clamp

Allied Tube&Conduit RP2785EG Strut U-Bolt Beam Clamp

Allied Tube&Conduit RP2785EG Strut U-Bolt Beam Clamp - 1/4 with 3/8 hex nut and u bolt (stock thickness). Design load 1000 lbs. Manufacturer’s number rp2785eg. 3-3/8 x 1-5/8 x 13/16 to 1-5/8 x 1-5/8 od. Store sku 3407509.

 

Platinum Tools JH965-50 Pressed Beam Clamp For 12-Inch Flanges 14-20 Threaded Rod 50 Per Box

Platinum Tools JH965-50 Pressed Beam Clamp For 1/2-Inch Flanges, 1/4-20 Threaded Rod, 50 Per Box

Platinum Tools JH965-50 Pressed Beam Clamp For 1/2-Inch Flanges, 1/4-20 Threaded Rod, 50 Per Box - â€œThis item is not sold directly by platinum tools. All platinum products absolutely must satisfy three critical benchmark criteria, utility of function, quality of function, and economic value. Platinum tools, founded in 1997, was created based upon two very simple objectives. ”. High quality all steel construction. The platinum tools jh965-50 pressed beam clamp for 1/2″ flanges, 1/4-20 threaded rod can hang ceiling wire & jack chain, threaded rod and eye lag screws. First, develop and source the absolute best possible solutions for the preparation, installation and hand termination of wire and cable. Our hardware is designed for the most efficient, secure and cost effective solution. Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod. Second, implement an operational infrastructure that can deliver these products in an efficient, timely and high quality manner.

 

Skywalker Signature Series Beam Clamp for Threaded Wire Rings Qty25

Skywalker Signature Series Beam Clamp for Threaded Wire Rings, Qty25

Skywalker Signature Series Beam Clamp for Threaded Wire Rings, Qty25 - Use this clamp to secure threaded wire rings to metal surfaces. Easy, efficient management of drop cable.

 

I-Beam Clamp

I-Beam Clamp

I-Beam Clamp - 5 nps threaded fitting is compatible with peerless extension columns (several models available, both fixed length and adjustable). 8 x 10mm phillips screwoperating systembatteries includedbatteries requirednumber of batteriesbattery typelanguageassembly required. The i-beam clamp is designed to anchor a peerless ceiling mount to an overhead i-beam. The 1 1/2-11. Two sizes are available, with a 4″ (102 mm) or 5″ (127 mm) adjustment range. Package contenti-beam clamp includes1 x tray2 x clamp for i-beam4 x carriage bolt 3/8-16 x 3/44 x cone bolt 3/8-16 x 1 1/24 x lock nut 3/8-164 x flat washer 3/8 x 3/4 x 1/82 x m5 x 0.

 

Northern Industrial Steel Beam Clamp - 10 Ton

Northern Industrial Steel Beam Clamp – 10 Ton

Northern Industrial Steel Beam Clamp – 10 Ton - Compact and easy to install with minimum headroom. All-steel construction for long-lasting strength. Adjusts in seconds to fit a variety of girder widths. ) 3 1/8 to 13 3/4. Capacity (ton) 10, material steel, flange width (in.

 

Harrington UBC010 UBC Universal Beam Clamp 3 - 75 Holding Size 083 Maximum Beam Flange Thick 1 ton Capacity

Harrington UBC010 UBC Universal Beam Clamp, 3″ – 7.5″ Holding Size, 0.83″ Maximum Beam Flange Thick, 1 ton Capacity

Harrington UBC010 UBC Universal Beam Clamp, 3″ – 7.5″ Holding Size, 0.83″ Maximum Beam Flange Thick, 1 ton Capacity - Overhead lifting and vertical rigging operations holding and positioning beams for construction. Lock nut feature resists loosening to improve secure clamping built-in suspension pin for low headroom. Lightweight portable design left-hand and right-hand clamp screw allows for quick clamping and unclamping. Jaw opening adjusts for a wide range of tapered or flat-flanged beams. Optional ubc suspender for perpendicular mounting and for oversized hooks.

 

Ceiling I-Beam Clamp

Ceiling I-Beam Clamp

Ceiling I-Beam Clamp - Overhead lifting and vertical rigging operations holding and positioning beams for construction. Lock nut feature resists loosening to improve secure clamping built-in suspension pin for low headroom. Lightweight portable design left-hand and right-hand clamp screw allows for quick clamping and unclamping. Jaw opening adjusts for a wide range of tapered or flat-flanged beams. Optional ubc suspender for perpendicular mounting and for oversized hooks.

 

THOMAS BETTS Z502-10 38 Malle I Beam Clamp

THOMAS & BETTS Z502-10 3/8″ Malle I Beam Clamp

THOMAS & BETTS Z502-10 3/8″ Malle I Beam Clamp - Easy to use. . The product is manufactured in china. The product is 3/8″ male i beam clamp.

 

STRUT 14 BEAM CLAMP by UNISTRUT MfrPartNo RP2894-25EG

STRUT 1/4″ BEAM CLAMP by UNISTRUT MfrPartNo RP2894-25EG

STRUT 1/4″ BEAM CLAMP by UNISTRUT MfrPartNo RP2894-25EG - Unistrut strut beam clamp. Rod or insulator support. Designed load 150 lbs(with 25 minimum safety factor). Cast malleable iron construction. 1/4 x 7/8 maximum flange thickness.

 

JET 252710 JBC-1 1-Ton Capacity Beam Clamp

JET 252710 JBC-1 1-Ton Capacity Beam Clamp

JET 252710 JBC-1 1-Ton Capacity Beam Clamp - 2 31/32 in [min], 8 21/32 in [max]. -Type beam/rail clamp. -iso. -Price is for 1 each. -Asme. Testing and approvals -ansi. 252710 style working load limit2000″lb, wt. 11lb (252710) this item features -grip cap. -Locking type t-bolt.

 

Steel Beam Clamp 1

Steel Beam Clamp #1

Steel Beam Clamp #1 - Top mount strut to beam clamp. For use with 1/2″ bolt in all 1-5/8″ series strut channels. Silver finish electro-galvanized zinc astm b633, type iii. 9/16″ diameter hole thickness 1/4″ (6mm). Genuine unistrut brand.

 

Morris 17462 Strut to Beam Clamp with Square U-Bolt 1316 - 1-58 Channel

Morris 17462 Strut to Beam Clamp with Square U-Bolt, 13/16″ – 1-5/8″ Channel

Morris 17462 Strut to Beam Clamp with Square U-Bolt, 13/16″ – 1-5/8″ Channel - Strut-to-beam clamp features zinc electroplate finish. Strut to beam clamp with square u-bolt for 13/16″ and 1-5/8″ channel, a strut-to-beam clamp with a small channel. Design load 1200lbs when used in pairs. Strut-to-beam clamp for small 13/16” & 1-5/8” channel.

 

JET HD-2T 2-Ton Heavy Duty Beam Clamp

JET HD-2T 2-Ton Heavy Duty Beam Clamp

JET HD-2T 2-Ton Heavy Duty Beam Clamp - Portable, lightweight steel construction allows you to mount hoists or lift beams easily adjustable from 2-15/16 in. To 8-11/16 in. To fit a broad range of wide flange h- or standard i-beams specially designed clamp jaw distributes the load away from the beam flange edge low headroom with built-in suspension rod. This jet heavy-duty beam clamp with 2-ton capacity is a secure choice for construction and commercial vertical or horizontal rigging operations. 2 15/16-8 11/16, material steel, capacity ton 2. Flange width in.

 

Sigma Electric 49004 Beam Clamp 1-Pack

Sigma Electric 49004 Beam Clamp, 1-Pack

Sigma Electric 49004 Beam Clamp, 1-Pack - . Sigma has been a trusted manufacturer of metal conduit fittings and weatherproof products for over 25 years. 1/4-20 beam clamp from sigma electric.

 

Morris 17472 Rod Support Beam Clamp Malleable Iron 14 - 20

Morris 17472 Rod Support Beam Clamp, Malleable Iron, 1/4″ – 20″

Morris 17472 Rod Support Beam Clamp, Malleable Iron, 1/4″ – 20″ - Malleable iron zinc plated. Used with conduit hangers, bridle rings & drop rods 1/4″ up to 1/2″. Malleable iron rod support beam clamp, strong, durable rod support beam clamp. Tapped for rods, bottom and back on all sizes.

 

14-20 Malleable Beam Clamp Zinc 50 per box

1/4-20 Malleable Beam Clamp, Zinc (50 per box)

1/4-20 Malleable Beam Clamp, Zinc (50 per box) - 1/4-20 malleable beam clamp, zinc (50 per box).

 

10 TRAILER I-BEAM GROUND CLAMP SATELLITE CATV 10 AWG GALVANIZED STEEL 200-230

10 TRAILER I-BEAM GROUND CLAMP SATELLITE CATV 10 AWG GALVANIZED STEEL 200-230

10 TRAILER I-BEAM GROUND CLAMP SATELLITE CATV 10 AWG GALVANIZED STEEL 200-230 - This product is used for connecting a ground wire to a ( grounded )mobile home / trailer i-beam. This sale is for a lot of new 10 trailer i-beam ground clamp satellite catv 10 awg galvanized steel 200-230. Before using this product make sure that your installation company or satellite tv or cable tv service provider allows i-beam clamps as a suitable ground. Always follow nec code when ground your installations.

 

Platinum Tools JH21BC-100 1 516-Inch Beam Clamp J-Hook Size 21 100 Per Box

Platinum Tools JH21BC-100 1 5/16-Inch Beam Clamp J-Hook, Size 21, 100 Per Box

Platinum Tools JH21BC-100 1 5/16-Inch Beam Clamp J-Hook, Size 21, 100 Per Box - The platinum tools jh21bc-100 1 5/16″ beam clamp j-hook, size 21 are traditional style, construction grade, multi-purpose j-hooks provide stress free cable support and help organize and build a distribution pathway for various types of cables. Perfect for the garage and shop too. The perfect solution for heavy duty hanging applications. Popular uses are for above suspended ceilings, below raised floors. All platinum products absolutely must satisfy three critical benchmark criteria, utility of function, quality of function, and economic value. “This item is not sold directly by platinum tools. Platinum tools, founded in 1997, was created based upon two very simple objectives. ”. Second, implement an operational infrastructure that can deliver these products in an efficient, timely and high quality manner. First, develop and source the absolute best possible solutions for the preparation, installation and hand termination of wire and cable.

 

Halex 35600B Beam Clamps Accessory Malleable Iron 25 Piece 1

Halex 35600B Beam Clamps Accessory Malleable Iron (25 Piece), 1″

Halex 35600B Beam Clamps Accessory Malleable Iron (25 Piece), 1″ - Halex was established in 1947 and all products are required to exceed the standard requirements set forth by ul and csa. Halex 35600b 1-inch beam clamps accessory- malleable iron- 25 pieces.

 

Elephant Lifting EBC-3 Eye Beam Clamp 3 ton Capacity 3-12 - 12-316 Flange Width

Elephant Lifting EBC-3 Eye Beam Clamp, 3 ton Capacity, 3-1/2″ – 12-3/16″ Flange Width

Elephant Lifting EBC-3 Eye Beam Clamp, 3 ton Capacity, 3-1/2″ – 12-3/16″ Flange Width - Ideal for any type of construction. The zinc plated clamp screw assembly allows for easy adjustment of the clamp. 35″, 122″ flange width. 3 metric ton capacity. The eye beam clamp can be used as an anchor for various applications.