20 Top Amana Router Bits

 

Amana Tool 45200 Straight Plunge 18-Inch Diameter by 716-Inch Cutting Height by 14-Inch Shank Solid Carbide Router Bit

Amana Tool 45200 Straight Plunge 1/8-Inch Diameter by 7/16-Inch Cutting Height by 1/4-Inch Shank Solid Carbide Router Bit

Amana Tool 45200 Straight Plunge 1/8-Inch Diameter by 7/16-Inch Cutting Height by 1/4-Inch Shank Solid Carbide Router Bit - New superior geometric design for super clean cuts. Solid carbide, industrial quality. 7/16-inch cutting height, 2-inch length. 1/4-inch shank, 2 flute. 1/8-inch cutting diameter.

 

Amana Tool 49492 Corner Round 58-Inch Diameter by 516-Inch Cut Height by 116-Inch Radius by 14-Inch Shank Carbide Tipped Router Bit

Amana Tool 49492 Corner Round 5/8-Inch Diameter by 5/16-Inch Cut Height by 1/16-Inch Radius by 1/4-Inch Shank Carbide Tipped Router Bit

Amana Tool 49492 Corner Round 5/8-Inch Diameter by 5/16-Inch Cut Height by 1/16-Inch Radius by 1/4-Inch Shank Carbide Tipped Router Bit - Radius 1/16-inch. 5/16-inch cutting height, 1-3/4-inch length. 1/4-inch shank, 2 flute. Carbide tipped, industrial quality. 5/8-inch cutting diameter.

 

Amana Tool 45676 Flooring 2-Flute Rounded Cutter with Changeable Bearings Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 45676 Flooring 2-Flute Rounded Cutter with Changeable Bearings Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 45676 Flooring 2-Flute Rounded Cutter with Changeable Bearings Carbide Tipped Router Bit, 1/4-Inch Shank - Rounded dedicated cutter with shank mounted changeable bearing. 45mm cutting height. 1/4-inch shank, 2 flute carbide tipped, industrial quality. Cutting diameter 1-1/4-inch. 1/8-inch radius, 3/8-inch depth cut.

 

Amana Tool 53400-1 Slotting Cutter Assembly 3 Wing x 1-78 D x 116 CH x 12 Inch SHK Router Bit

Amana Tool 53400-1 Slotting Cutter Assembly 3 Wing x 1-7/8 D x 1/16 CH x 1/2 Inch SHK Router Bit

Amana Tool 53400-1 Slotting Cutter Assembly 3 Wing x 1-7/8 D x 1/16 CH x 1/2 Inch SHK Router Bit - 1-9/16-inch cutting height. 1/4-inch cutting height. Cutting diameter 1-3/8-inch. 1/2 inch shank. 1/2-inch shank, 2 flute.

 

Amana Tool 54176 Flute and Bead 1-12-Inch Diameter by 12-Inch Cutting Height by 12-Inch 2-Flute Shank Router Bit Set

Amana Tool 54176 Flute and Bead 1-1/2-Inch Diameter by 1/2-Inch Cutting Height by 1/2-Inch 2-Flute Shank Router Bit Set

Amana Tool 54176 Flute and Bead 1-1/2-Inch Diameter by 1/2-Inch Cutting Height by 1/2-Inch 2-Flute Shank Router Bit Set - Carbide tipped, industrial quality. 1/2-inch cutting height. 1/8-inch radius. Cutting diameter 1-1/2-inch. Cut plywood, hardwood, softwood, and composition materials, in cnc or table-mounted routers.

 

Amana Tool 45206 Carbide Tipped Undersized Plywood Dado Plunge 732 D x 34 CH x 14 Inch SHK Router Bit for Plywood Thickness 14 minus 132

Amana Tool 45206 Carbide Tipped Undersized Plywood Dado Plunge 7/32 D x 3/4 CH x 1/4 Inch SHK Router Bit for Plywood Thickness 1/4 minus 1/32

Amana Tool 45206 Carbide Tipped Undersized Plywood Dado Plunge 7/32 D x 3/4 CH x 1/4 Inch SHK Router Bit for Plywood Thickness 1/4 minus 1/32 - Undersized plywood dado plunge router bits.

 

Amana Tool 45364 Down Shear Plunge Template 34-Inch Dia x 2-Inch Cut Height x 12 Shank 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing

Amana Tool 45364 Down Shear Plunge Template 3/4-Inch Dia x 2-Inch Cut Height x 1/2 Shank 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing

Amana Tool 45364 Down Shear Plunge Template 3/4-Inch Dia x 2-Inch Cut Height x 1/2 Shank 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing - Can be used with hand-held and table-mounted portable routers. 2-inch cutting height. 1/2-inch shank, 2 flute. Carbide tipped, industrial quality. Cutting diameter 3/4-inch.

 

Amana Tool 46201 Solid Carbide Spiral Plunge 316 D x 34 CH x 14 SHK x 2 Inch Long Down-Cut Router Bit

Amana Tool 46201 Solid Carbide Spiral Plunge 3/16 D x 3/4 CH x 1/4 SHK x 2 Inch Long Down-Cut Router Bit

Amana Tool 46201 Solid Carbide Spiral Plunge 3/16 D x 3/4 CH x 1/4 SHK x 2 Inch Long Down-Cut Router Bit - Solid carbide spiral flute plunge-2 flute-downcut.

 

Amana Tool 45415 Straight Plunge 38-Inch Diameter by 1-14-Inch Cutting Height by 12-Inch Shank Solid Carbide Router Bit

Amana Tool 45415 Straight Plunge 3/8-Inch Diameter by 1-1/4-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit

Amana Tool 45415 Straight Plunge 3/8-Inch Diameter by 1-1/4-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit - 3/8-inch cutting diameter. Carbide tipped, industrial quality. New superior geometric design for super clean cuts. 1/2-inch shank, 2 flute. 1-1/4-inch cutting height, 3-inch length.

 

Amana Tool 54108 Carbide Tipped Classical Bead Cove 732 x 1564 R x 1-12 D x 58 CH x 12 Inch SHK w Lower BB Router Bit

Amana Tool 54108 Carbide Tipped Classical Bead & Cove 7/32 x 15/64 R x 1-1/2 D x 5/8 CH x 1/2 Inch SHK w/ Lower BB Router Bit

Amana Tool 54108 Carbide Tipped Classical Bead & Cove 7/32 x 15/64 R x 1-1/2 D x 5/8 CH x 1/2 Inch SHK w/ Lower BB Router Bit - Classical bead & cove router bits.

 

Amana Tool 45481 Flush TrimPattern Plunge 12-Inch Diameter by 38-Inch Cutting Height by 14-Inch Shank Carbide Tipped Router Bit

Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit

Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit - 2-1/4-inch length. Carbide tipped, industrial quality. 3/8-inch cutting height. 1/4-inch shank, 2 flute. 1/2-inch cutting diameter.

 

Amana Tool 54269 Handrail 1-14-Inch Diameter by 1-12-Inch Cutting Height by 12-Inch Shank 2-Flute Router Bit

Amana Tool 54269 Handrail 1-1/4-Inch Diameter by 1-1/2-Inch Cutting Height by 1/2-Inch Shank 2-Flute Router Bit

Amana Tool 54269 Handrail 1-1/4-Inch Diameter by 1-1/2-Inch Cutting Height by 1/2-Inch Shank 2-Flute Router Bit - Carbide tipped, industrial quality. Make attractive handrails with this bit. 1-1/2-inch cutting height, 3/8-inch lower radius, 1/2-inch upper radius. Cutting diameter 1-1/4-inch. 1/2-inch shank.

 

Amana Tool 45418 Straight Plunge 12-Inch Diameter by 1-Inch Cutting Height by 12-Inch Shank Carbide Tipped Router Bit

Amana Tool 45418 Straight Plunge 1/2-Inch Diameter by 1-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit

Amana Tool 45418 Straight Plunge 1/2-Inch Diameter by 1-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit - 1/2-inch cutting diameter. 1/2-inch shank, 2 flute. Carbide tipped, industrial quality. New superior geometric design for super clean cuts. 1-inch cutting height, 2-5/8-inch length.

 

Amana Tool 45465 Flush TrimPattern Plunge 34-Inch Diameter by 1-34-Inch Cutting Height by 12-Inch Shank Carbide Tipped Router Bit

Amana Tool 45465 Flush Trim/Pattern Plunge 3/4-Inch Diameter by 1-3/4-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit

Amana Tool 45465 Flush Trim/Pattern Plunge 3/4-Inch Diameter by 1-3/4-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit - 3/4-inch cutting diameter. 1-3/4-inch cutting height. 3-3/4-inch length. Carbide tipped, industrial quality. 1/2-inch shank, 2 flute.

 

Amana Tool 49232 Carbide Tipped Plunge Raised Ogee Style B 38 R x 1-58 D x 2332 CH x 12 Inch SHK Router Bit

Amana Tool 49232 Carbide Tipped Plunge Raised Ogee Style B 3/8 R x 1-5/8 D x 23/32 CH x 1/2 Inch SHK Router Bit

Amana Tool 49232 Carbide Tipped Plunge Raised Ogee Style B 3/8 R x 1-5/8 D x 23/32 CH x 1/2 Inch SHK Router Bit - Plunge raised ogee router bits style b.

 

Amana Tool 45982 CNC Bowl and Tray 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 45982 CNC Bowl and Tray 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 45982 CNC Bowl and Tray 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - Carbide tipped, industrial quality. 1/4-inch radius. 1/4-inch shank, 2 flute. Cutting diameter 3/4-inch. 5/8-inch cutting height.

 

Amana Tool 45984 CNC Bowl and Tray 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45984 CNC Bowl and Tray 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45984 CNC Bowl and Tray 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 1/2-inch shank, 2 flute. 1/4-inch radius. 5/8-inch cutting height. Carbide tipped, industrial quality. Cutting diameter 3/4-inch.

 

Amana Tool 43720 Solid Carbide Single Flute Straight Plunge High Production 14 D x 1 Inch CH x 14 SHK Router Bit

Amana Tool 43720 Solid Carbide Single Flute Straight Plunge High Production 1/4 D x 1 Inch CH x 1/4 SHK Router Bit

Amana Tool 43720 Solid Carbide Single Flute Straight Plunge High Production 1/4 D x 1 Inch CH x 1/4 SHK Router Bit - Solid carbide. 1-3/8 diameter, 1-13/16 cutting height, 1/2-inch shank, 1/4-inch cutting depth, 1/8-inch radius. Carbide tipped, industrial quality. For use only in a table mounted router. Full color instructions included learn step-by-step with master craftsman lonnie bird.

 

Amana Tool 45487 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Ball Bearing 14-Inch Shank

Amana Tool 45487 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Ball Bearing, 1/4-Inch Shank

Amana Tool 45487 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Ball Bearing, 1/4-Inch Shank - It is a versatile bit, useful for template/pattern routing of parts, joints, and internal cuts, and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work with a table-mounted router, the pattern is underneath the work. This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot.

 

Amana Tool 49506 Corner Round 1-Inch Diameter by 12-Inch Cut Height by 14-Inch Radius by 12-Inch Shank Carbide Tipped Router Bit

Amana Tool 49506 Corner Round 1-Inch Diameter by 1/2-Inch Cut Height by 1/4-Inch Radius by 1/2-Inch Shank Carbide Tipped Router Bit

Amana Tool 49506 Corner Round 1-Inch Diameter by 1/2-Inch Cut Height by 1/4-Inch Radius by 1/2-Inch Shank Carbide Tipped Router Bit - Radius 1/4-inch. 1-inch cutting diameter. 1/2-inch shank, 2 flute. Carbide tipped, industrial quality. 1/2-inch cutting height, 2-7/16-inch length.