20 Best Spot Weld Drill Bits

 

Cobalt Spot Weld Drill Bit 8X80Mm by Dent Fix

Cobalt Spot Weld Drill Bit 8X80Mm by Dent Fix

Cobalt Spot Weld Drill Bit 8X80Mm by Dent Fix - 80mm hsco spot weld drill bit. 6489292. Cobalt spot weld drill bit 8x80mm.

 

8mm HSCo Spot Weld Drill Bit

8mm HSCo Spot Weld Drill Bit

8mm HSCo Spot Weld Drill Bit - -High speed steel and cobalt composition. -Specialized head for efficient cutting of spot welds. Number of bits -1. Generic dimensions -3. Unit material -steel. -Specialized head to maximum usage life of bit. -1” h x 1” w x 1” d. Saw cutting depth -1 3/4/1 7/8. 15” length for use in any drill. Size -5/16″. Use -drill bits. Dendf-1780 features -spot weld drill bit.

 

Malco SW3 516-Inch Spot Weld Cobalt Drill Bit

Malco SW3 5/16-Inch Spot Weld Cobalt Drill Bit

Malco SW3 5/16-Inch Spot Weld Cobalt Drill Bit - The squared-off drill bit tip leaves a precise, clean hole only in the panel to be removed. Removal of spot welds by this method is accomplished without drilling through both joined metal panels. Remaining panel requires minimal surface grinding. Long-life, 5/16-in cobalt, steel drill bit features a self-centering, non-walking, shallow design.

 

Dent Fix DF-1780T Titanium Spot Weld Drill Bit Hsco Tin 8x80mm

Dent Fix DF-1780T Titanium Spot Weld Drill Bit Hsco Tin 8x80mm

Dent Fix DF-1780T Titanium Spot Weld Drill Bit Hsco Tin 8x80mm - Use with any drill the high speed steeland cobalt (hsco) composition and heat resistant titanium coatingof this bit will maximize the cutting life. There is nopilot drill to break or create an unwanted hole. Features and benefitsspecialized head for efficient cutting of weldsspecialized head to maximum usage life of bithigh speed steel and cobalt composition8. 0 mm or 5/16th is most popular spot weld bit sizetitanium coating for greater heat resistance and longevitythis bit is&ampnbspspecifically designed to help thetechnician remove spot welds efficiently and fully. There are no plugsleft behind to grind away. Precision made ingermany.

 

Wurth Cobalt Spot Weld Drill Bit 8mm

Wurth Cobalt Spot Weld Drill Bit 8mm

Wurth Cobalt Spot Weld Drill Bit 8mm - Tips to enhance the lifespan of the centering tip, do not use in drills with an impact chuck or spindles -set the drill to a suitable speed the speed of compressed air devices is generally set too high total length 78mm groove length 38mm max. Speed 850 rpm.

 

80mm HSCO Spot Weld Drill Bit

8.0mm HSCO Spot Weld Drill Bit

8.0mm HSCO Spot Weld Drill Bit - 8mm hsco spot weld drill bit. 6489292. 80mm hsco spot weld drill bit.

 

65mm HSCO Spot Weld Drill Bit Tools Equipment Hand Tools

6.5mm HSCO Spot Weld Drill Bit Tools Equipment Hand Tools

6.5mm HSCO Spot Weld Drill Bit Tools Equipment Hand Tools - 5mm hsco spot weld drill bit tools equipment hand tools. 6.

 

Dent Fix Equipment Df1610 and Spot Weld Drill Bit 10Mm Hsco and Germany

Dent Fix Equipment Df1610 and Spot Weld Drill Bit 10Mm Hsco and Germany

Dent Fix Equipment Df1610 and Spot Weld Drill Bit 10Mm Hsco and Germany - The twist is larger than the shank which is 80mm and has a flat spot on it to be tightened into our. Specifically designed for the abuse of spot weld drilling. This bit is our 100 mm and the largest diameter high speed steel cobalt (hsco) spot weld bit. Our cobalt high speed steel mix bits are 1-3/4 in (450 mm) long and work with all brands. Flat ground for strength, centering nib to prevent walking.

 

10mm HSCO Titanium Coated Spot Weld Drill Bit

10mm HSCO Titanium Coated Spot Weld Drill Bit

10mm HSCO Titanium Coated Spot Weld Drill Bit - The shipping weight reflected is the dimensional weight. Features and benefits this bit is our 10. 0mm and has a flat spot on it to be tightened into our df-15 series spot weld drills specifically designed for the abuse of spot weld drilling flat ground for strength, centering nib to prevent walking our cobalt high speed steel mix bits are 1-3/4″ (450 mm) long and work with all brands of spot weld drills titanium is a heat resistant coating that extends drill life by about 50%. This product meets the oversized requirement per ups/fedex. The estimated shipping cost will include this fee. This product also meets the large package requirement per ups/fedex. 0mm and the largest diameter high speed steel cobalt (hsco) spot weld bit we offer the twist is larger than the shank which is 8. .

 

8mm Titanium Coated HSCo Spot Weld Drill Bit Tools Equipment Hand Tools

8mm Titanium Coated HSCo Spot Weld Drill Bit Tools Equipment Hand Tools

8mm Titanium Coated HSCo Spot Weld Drill Bit Tools Equipment Hand Tools - This product meets the oversized requirement per ups/fedex. There are no plugs left behind to grind away. Use with any drill the high speed steel and cobalt (hsco) composition and heat resistant titanium coating of this bit will maximize the cutting life. 0 mm or 5/16th is most popular spot weld bit size titanium coating for greater heat resistance and longevity this bit is specifically designed to help the technician remove spot welds efficiently and fully. Features and benefits specialized head for efficient cutting of welds specialized head to maximum usage life of bit high speed steel and cobalt composition 8. Precision made in germany. The shipping weight reflected is the dimensional weight. There is no pilot drill to break or create an unwanted hole. This product also meets the large package requirement per ups/fedex. The estimated shipping cost will include this fee.

 

Viking Drill and Tool 37680  Twin End Type 492-D Cobalt Gold Spur Point Spot-Weld Drill Bit 5 Pack 100mm362

Viking Drill and Tool 37680 Twin End Type 492-D Cobalt Gold Spur Point Spot-Weld Drill Bit (5 Pack), 10.0mm/3.62″

Viking Drill and Tool 37680 Twin End Type 492-D Cobalt Gold Spur Point Spot-Weld Drill Bit (5 Pack), 10.0mm/3.62″ - Our 74,000 square foot st. All materials used at viking drill and tool meet the rigorous qualifications of national aerospace standard (nas) 907. Consistency is a natural by-product of our experience and dedication to quality. Committed to quality, consistency, service and value quality at viking drill and tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. On our ultra bor super premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. Paul, minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. Manufactured products. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability. S. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. Manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against. Our extensive selection of u. The use of these extreme high quality materials insures that consistency is built in to every one of our u. At viking drill and tool, skilled machine operators working with the world’s finest raw materials have the capability of providing you with consistent high quality products time after time, year after year. S.

 

Magafor 82290309000  Red-X Cobalt Spot Weld Drill Bit 900 mm

Magafor 82290309000 Red-X Cobalt Spot Weld Drill Bit, 9.00 mm

Magafor 82290309000 Red-X Cobalt Spot Weld Drill Bit, 9.00 mm - The product is manufactured in france. 9. 00mm red-x cobalt spot weld drill. Easy installation.

 

Boron Steel Spot Weld Drill Bit for UHSS AHSS and Boron Steels Tools Equipment Hand Tools

Boron Steel Spot Weld Drill Bit for UHSS, AHSS and Boron Steels Tools Equipment Hand Tools

Boron Steel Spot Weld Drill Bit for UHSS, AHSS and Boron Steels Tools Equipment Hand Tools - 0mm, special multi-layered coated, 3 fluted drill bit is the only bit that is tough enough to drill through and survive ultra high strength steel, aka boron steel the three cutting edges help spread cutting forces over a greater area, thus helping prevent premature breakage multi layer coating makes lubrication unnecessary bit may be used with our original red ringed 1800 rpm drill or better yet with our blue ringed 1000 rpm drill  this product meets the large package requirement per ups/fedex. . Features and benefits this drill bit was created to specifically cut spot welds from boron steel made of tungsten carbide this 8. The estimated shipping cost will include this fee.

 

80mm HSCO Boron Steel Spot Weld Drill Bit

8.0mm HSCO Boron Steel Spot Weld Drill Bit

8.0mm HSCO Boron Steel Spot Weld Drill Bit - For high strength steelstitanium coating help prevent the bit from dulling due to overheating, extends drill life by about 50%. Flat ground for strength, centering nib to prevent walking.

 

Viking Drill and Tool 66190 Type 493-D Gold Cobalt Spot-weld Drill Bit 5 Pack 100mm225

Viking Drill and Tool 66190 Type 493-D Gold Cobalt Spot-weld Drill Bit (5 Pack), 10.0mm/2.25″

Viking Drill and Tool 66190 Type 493-D Gold Cobalt Spot-weld Drill Bit (5 Pack), 10.0mm/2.25″ - S. Manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against. Our 74,000 square foot st. On our ultra bor super premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability. At viking drill and tool, skilled machine operators working with the world’s finest raw materials have the capability of providing you with consistent high quality products time after time, year after year. Consistency is a natural by-product of our experience and dedication to quality. The use of these extreme high quality materials insures that consistency is built in to every one of our u. S. Manufactured products. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. Committed to quality, consistency, service and value quality at viking drill and tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. All materials used at viking drill and tool meet the rigorous qualifications of national aerospace standard (nas) 907. Paul, minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. Our extensive selection of u.

 

Dent Fix Equip 8mm Titanium Coated Spot Weld Drill Bit

Dent Fix Equip 8mm Titanium Coated Spot Weld Drill Bit

Dent Fix Equip 8mm Titanium Coated Spot Weld Drill Bit - Titanium heat resistant coating extends drill life by 50%. Dent fix equip 8mm titanium coated spot weld drill bit dent-fix drill bits a specifically designed for the abuse of spot weld drilling. Made in germany. Flat ground for strength, centering nib to prevent walking. Genuine dent-fix replacement part for use with the annihilator spot weld drill.

 

Dent Fix Equipment DTF-DF-1680T 80Mm Titanium Spot Weld Drill Bit

Dent Fix Equipment DTF-DF-1680T 8.0Mm Titanium Spot Weld Drill Bit

Dent Fix Equipment DTF-DF-1680T 8.0Mm Titanium Spot Weld Drill Bit - This is our most popular spot weld drill bit 8. Titanium (gold color) is a heat resistant coating that extends drill life by about 50%. 0mm or 5/16th is the most common size of spot welds that need to be removed the titanium coating on this bit will help prevent the bit from dulling due to overheating the twist is the same size as the shank which is also 8. . 0mm and has a flat spot on it to be tightened into our df-15 series spot weld drills specifically designed for the abuse of spot weld drilling flat ground for strength, centering nib to prevent walkingthis cobalt high-speed steel mix bit is 45mm long and works with all brands of spot-weld drills.

 

Century Drill and Tool 17680 Spot Weld Drill Bit 800mm

Century Drill and Tool 17680 Spot Weld Drill Bit, 8.00mm

Century Drill and Tool 17680 Spot Weld Drill Bit, 8.00mm - Made in the usa. Made from premium cobalt steel for a longer useful tool life. Spot weld drill bit with modified center spur designed to cut welds on the top panel leaving the pack panel slightly penetrated.

 

Viking Drill and Tool 37671  Twin End Type 187 Gold Cobalt Spot-Weld Drill Bit 5 Pack 8mm362

Viking Drill and Tool 37671 Twin End Type 187 Gold Cobalt Spot-Weld Drill Bit (5 Pack), 8mm/3.62″

Viking Drill and Tool 37671 Twin End Type 187 Gold Cobalt Spot-Weld Drill Bit (5 Pack), 8mm/3.62″ - On our ultra bor super premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. Consistency is a natural by-product of our experience and dedication to quality. Paul, minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. Our extensive selection of u. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability. S. Manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against. Our 74,000 square foot st. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. Manufactured products. The use of these extreme high quality materials insures that consistency is built in to every one of our u. S. Committed to quality, consistency, service and value quality at viking drill and tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. All materials used at viking drill and tool meet the rigorous qualifications of national aerospace standard (nas) 907. At viking drill and tool, skilled machine operators working with the world’s finest raw materials have the capability of providing you with consistent high quality products time after time, year after year.

 

Magafor 82290308000  Red-X Cobalt Spot Weld Drill Bit 80 mm

Magafor 82290308000 Red-X Cobalt Spot Weld Drill Bit, 8.0 mm

Magafor 82290308000 Red-X Cobalt Spot Weld Drill Bit, 8.0 mm - Easy installation. 8. 0mm red-x co spot weld drill. The product is manufactured in france.