19 Top Square Nose End Mills

 

Melin Tool EMG-M-M Carbide Micro Square Nose End Mill Metric Uncoated Bright Finish 30 Deg Helix 3 Flutes 38mm Overall Length 1mm Cutting Diameter 3mm Shank Diameter

Melin Tool EMG-M-M Carbide Micro Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 38mm Overall Length, 1mm Cutting Diameter, 3mm Shank Diameter

Melin Tool EMG-M-M Carbide Micro Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 38mm Overall Length, 1mm Cutting Diameter, 3mm Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 30 degree helix angle. General purpose square end.

 

YG-1 E5065 Carbide Square Nose End Mill Extra Long Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 6 Overall Length 025 Cutting Diameter 025 Shank Diameter

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Four flutes produce a better finish than fewer flutes. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.

 

YG-1 E5977 Carbide Square Nose End Mill Extra Long Reach TiCN Monolayer Finish Finishing Cut Non-Center Cutting 37 Deg Helix 3 Flutes 4 Overall Length 025 Cutting Diameter 025 Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than uncoated tools. Extended-reach neck style provides access to recessed areas of the workpiece. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Suitable for high-performance machining on aluminum and other nonferrous materials.

 

Niagara Cutter N41672 Cobalt Steel Square Nose End Mill Weldon Shank TiCN Finish Roughing and Finishing Cutting 30-Degree 4-Flute 25 OAL 0375 Cut Diameter 0375 Shank Diameter

Niagara Cutter N41672 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 2.5″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N41672 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 2.5″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Truncated rougher-finisher removes material in less time than conventional end mills while producing a finer finish than fine- or coarse-pitch roughers. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Number of flutes varies by diameter for optimum feed and cut rate. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating.

 

Wokesi 1mm 15mm 2mm 3mm Cutter DiaPack of 4Std Length4FlutesHRC55TiAlN CoatedMetricSolid CarbideSquare Nose End MillCNC Router Bits Cutting Milling Tools 1mm15mm2mm3mm HRC55

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55)

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55) - 3suitable for process alloy,iron and steel under hrc55high performance. 5package 1 pack of 4 pieces endmill cutter. 4high micro hardness,high abrasion resistance,good toughness. 2materialtungsten carbide,high quality tialn coating,getting long tool life. 1contains 4pcs square endmills1pc×1mmdia,1pc×15mmdia,1pc×2mmdia and 1pc×3mmdia.

 

CGC Tools CEM14F3 Primate Square Nose End Mill 3 Flute 14 Diameter 34 LOC 2-12 OAL

CGC Tools CEM14F3 Primate Square Nose End Mill, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F3 Primate Square Nose End Mill, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL - Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Usa, flat, 3 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length. This weapon of mass production destroy any competition. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.

 

Melin Tool ELMG-M-M Carbide Square Nose End Mill Metric TiCN Monolayer Finish 30 Deg Helix 3 Flutes 51mm Overall Length 5mm Cutting Diameter 5mm Shank Diameter

Melin Tool ELMG-M-M Carbide Square Nose End Mill, Metric, TiCN Monolayer Finish, 30 Deg Helix, 3 Flutes, 51mm Overall Length, 5mm Cutting Diameter, 5mm Shank Diameter

Melin Tool ELMG-M-M Carbide Square Nose End Mill, Metric, TiCN Monolayer Finish, 30 Deg Helix, 3 Flutes, 51mm Overall Length, 5mm Cutting Diameter, 5mm Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Small corner radius for added strength and smoother cutting action. Titanium carbonitride coatings are harder and more wear-resistant than tin for improved tool life and faster cutting speeds. 3 flute design for lighter finishing cuts. Round shanks allow use with a wide variety of toolholding systems.

 

Precision Twist E6302 Carbide Square Nose End Mill Long Reach Uncoated Bright Finish Roughing Cut 30 Deg Helix 2 Flutes 3 Overall Length 316 Cutting Diameter 316 Shank Diameter

Precision Twist E6302 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Roughing Cut, 30 Deg Helix, 2 Flutes, 3″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter

Precision Twist E6302 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Roughing Cut, 30 Deg Helix, 2 Flutes, 3″ Overall Length, 3/16″ Cutting Diameter, 3/16″ Shank Diameter - Extra-long length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Wokesi Pack of 6Pcs14 38 516 58 12 34 Blade DiameterHigh Speed SteelExtra LongSquare Nose End Mill Cutter CNC Router Bits 1438516581234 Extra Long 4Flute

Wokesi Pack of 6Pcs,1/4 3/8 5/16 5/8 1/2 3/4 Blade Diameter,High Speed Steel,Extra Long,Square Nose End Mill Cutter CNC Router Bits (1/4+3/8+5/16+5/8+1/2+3/4 Extra Long 4Flute)

Wokesi Pack of 6Pcs,1/4 3/8 5/16 5/8 1/2 3/4 Blade Diameter,High Speed Steel,Extra Long,Square Nose End Mill Cutter CNC Router Bits (1/4+3/8+5/16+5/8+1/2+3/4 Extra Long 4Flute) - Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc. Contains 6pcs square nose endmills1/4+3/8+5/16+5/8+1/2+3/4 blade diameter. Package6pc×end mill ball nose cutter. Materialm2ai,high speed steel,long tool life. 2 flute,full grinded,high abrasion resistance,obtain accuracy and fine finish.

 

Niagara Cutter N46712 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Finishing Cut Non-Center 30-Degree 6-Flute 4 OAL 0844 Cut Diameter 0625 Shank Diameter

Niagara Cutter N46712 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Finishing Cut, Non-Center, 30-Degree, 6-Flute, 4″ OAL, 0.844″ Cut Diameter, 0.625″ Shank Diameter

Niagara Cutter N46712 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Finishing Cut, Non-Center, 30-Degree, 6-Flute, 4″ OAL, 0.844″ Cut Diameter, 0.625″ Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Non-center-cutting design supports peripheral milling and finishing. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

 

Niagara Cutter N61655 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 3 Overall Length 0500 Cutting Diameter 0500 Shank Diameter

Niagara Cutter N61655 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 3″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N61655 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 3″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter - 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

 

Niagara Cutter N35160 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish RoughingFinishing Cut Non-Center 30-Degree 4-Flute 325 OAL 0500 Cut Diameter 05000 Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter - Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. High-speed steel is compatible with a variety of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills.

 

Wokesi Pack of 34 6 8mm Blade DiameterExtra Long4FlutesTiAlN CoatedSolid Tungsten steelSquare Nose End MillCNC Router Bits4mm6mm8mm Long HRC45

Wokesi Pack of 3,4 6 8mm Blade Diameter,Extra Long,4Flutes,TiAlN Coated,Solid Tungsten steel,Square Nose End Mill,CNC Router Bits(4mm+6mm+8mm Long, HRC45)

Wokesi Pack of 3,4 6 8mm Blade Diameter,Extra Long,4Flutes,TiAlN Coated,Solid Tungsten steel,Square Nose End Mill,CNC Router Bits(4mm+6mm+8mm Long, HRC45) - Package 1 pack of 3 pieces endmill cutter. Suitable for process alloy,iron and steel under hrc45(hra73)high performance. Contains 3pcs4mm4mmshank75mmoal,6mm6mmshank75mmoal,8mm8mmshank100mmoal. Materialtungsten carbide,high quality tialn coating,getting long tool life. High micro hardness,high abrasion resistance,good toughnesscan be high-speed processing.

 

Precision Twist E6304 Carbide Square Nose End Mill Long Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 6 Overall Length 12 Cutting Diameter 12 Shank Diameter

Precision Twist E6304 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 1/2″ Cutting Diameter, 1/2″ Shank Diameter

Precision Twist E6304 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 1/2″ Cutting Diameter, 1/2″ Shank Diameter - Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Four flutes produce a better finish than fewer flutes. Square nose end mills (also called square end) create sharp, unrounded cuts. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Extra-long length end mills have longer cutting edges and can make deeper cuts than long-length end mills.

 

Niagara Cutter N52182 Cobalt Steel Square Nose End Mill Inch Weldon Shank Uncoated Bright Finish Finishing Cut 30 Degree Helix 4 Flutes 3375 Overall Length 0563 Cutting Diameter 0500 Shank Diameter

Niagara Cutter N52182 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.375″ Overall Length, 0.563″ Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N52182 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.375″ Overall Length, 0.563″ Cutting Diameter, 0.500″ Shank Diameter - Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

CGC Tools CEM14F2 Primate Square Nose End Mill 2 Flute 14 Diameter 34 LOC 2-12 OAL

CGC Tools CEM14F2 Primate Square Nose End Mill, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F2 Primate Square Nose End Mill, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL - Extremely versatile in various materials, center cutting, solid sub-micron carbide. This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Usa, flat, 2 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length.

 

Niagara Cutter N44125 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Finish RoughingFinishing Cut Non-Center 30-Degree 4-Flute 325 OAL 0375 Cut Diameter 0375 Shank Diameter

Niagara Cutter N44125 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N44125 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter - Number of flutes varies by diameter for optimum feed and cut rate. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Square nose end mills (also called square end) create sharp, unrounded cuts. Truncated rougher-finisher removes material in less time than conventional end mills while producing a finer finish than fine- or coarse-pitch roughers. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

 

Niagara Cutter N46420 Carbide Square Nose End Mill Metric AlTiN Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 39mm Overall Length 3mm Cutting Diameter 3000mm Shank Diameter

Niagara Cutter N46420 Carbide Square Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter

Niagara Cutter N46420 Carbide Square Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Four flutes produce a better finish than fewer flutes. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin, tialn, and ticn coatings.

 

Niagara Cutter N85267 Carbide Square Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Square nose end mills (also called square end) create sharp, unrounded cuts. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.