19 Greatest Collet Closers for 2019

 

JET 321160 Lathe with Collet Closer and Taper Attachment

JET 321160 Lathe with Collet Closer and Taper Attachment

JET 321160 Lathe with Collet Closer and Taper Attachment - Uniquely designed exclusively by jet. Plined, not keyed, shafts are utilized in the headstock. Headstock is constantly oiled during operation. Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings.

 

Jet GH-2280ZX With Newall DP700 DRO With Taper Attachment and Collet Closer

Jet GH-2280ZX With Newall DP700 DRO With Taper Attachment and Collet Closer

Jet GH-2280ZX With Newall DP700 DRO With Taper Attachment and Collet Closer - Chrome molybdenum headstock gears are hardened, ground and shaved. Uniquely designed exclusively by jet. Includes factory warranty. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. 3-1/8 bore spindle is supported by two tapered and one ball bearing.

 

Sherline 1153 - Collet Closer Stop Kit

Sherline 1153 – Collet Closer Stop Kit

Sherline 1153 – Collet Closer Stop Kit - Included are four different length rods for various ranges of adjustment. Please note that pictured is the collet closer itself and is for reference only, the collet closer is sold separately. This listing is for the collet closer stop kit. 5″ from the end of each rod shows when the rod is extended past a safe operating distance from the end of the spindle. A scribed mark 1. With the proper rod in place, the material is inserted in the collet until it hits the stop, providing a consistent position for a series of identical parts. The rods are held in place by a set screw. If the scribed line can be seen, the next shorter rod should be substituted. Sherline 1153, collet closer stop kitthe stop block threads into the back of the collet knob.

 

5C-CB 5C Collet Block Set - Hex Collet Block Square Collet Block and Collet Closer by 5C Tooling

5C-CB 5C Collet Block Set – Hex Collet Block, Square Collet Block and Collet Closer by 5C Tooling

5C-CB 5C Collet Block Set – Hex Collet Block, Square Collet Block and Collet Closer by 5C Tooling - Made of high quality tool steel, hardened. 5c-cb 5c collet block set, hex collet block, square collet block and collet closer. Capacity 1/16″ thru 1-1/8″. Precision ground, parallel and square to within 0005″.

 

JET CC-ZX Collet Closer for All ZX Lathe Models

JET CC-ZX, Collet Closer for All ZX Lathe Models

JET CC-ZX, Collet Closer for All ZX Lathe Models - Rear mounted lever action. Specially designed for each model. Precision ground components. Collet closer. Uses 5c collets.

 

JET GH1440ZX Lathe with ACU-RITE 200S DRO and Collet Closer Installed

JET GH1440ZX Lathe with ACU-RITE 200S DRO and Collet Closer Installed

JET GH1440ZX Lathe with ACU-RITE 200S DRO and Collet Closer Installed - Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Iso9001 certified manufacturer. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Uniquely designed by jet. Chrome molybdenum headstock gears are hardened, ground and shaved.

 

JET GH-1880ZX Lathe with 2-axis ACU-RITE DRO 200S Collet Closer and Taper Attachment Installed

JET GH-1880ZX Lathe with 2-axis ACU-RITE DRO 200S, Collet Closer and Taper Attachment Installed

JET GH-1880ZX Lathe with 2-axis ACU-RITE DRO 200S, Collet Closer and Taper Attachment Installed - Chrome molybdenum headstock gears are hardened, ground and shaved. Uniquely designed exclusively by jet. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Iso 9001 certified manufacturer.

 

JET GHB-1340A Lathe with Collet Closer and Tak

JET GHB-1340A Lathe with Collet Closer and Tak

JET GHB-1340A Lathe with Collet Closer and Tak - Hardened and ground gears are featured in the headstock and gearbox. One of the most popular jet lathes now comes with an enclosed gearbox as a standard feature. Enclosed gearbox design provides smooth, quiet operation. Fast, easy speed changes. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings.

 

JET GH-1660ZX Lathe with 2-axis ACU-RITE 200S Taper Attachment and Collet Closer Installed

JET GH-1660ZX Lathe with 2-axis ACU-RITE 200S, Taper Attachment and Collet Closer Installed

JET GH-1660ZX Lathe with 2-axis ACU-RITE 200S, Taper Attachment and Collet Closer Installed - Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Iso 9001 certified manufacturer. Uniquely designed exclusively by jet.

 

JET GH-1640ZX Lathe with Collet Closer

JET GH-1640ZX Lathe with Collet Closer

JET GH-1640ZX Lathe with Collet Closer - Is o9001 certified manufacturer. Uniquely designed exclusively by jet. 3-1/8″ bore spindle is supported by two tapered and one ball bearing. Carriage features one-shot lubrication and turcite-b on bed sliding surfaces. Chrome molybdenum headstock gears are hardened, ground and shaved.

 

JET 322406 Lathe with ACU-RITE VUE DRO and Taper Attachment Collet Closer

JET 322406 Lathe with ACU-RITE VUE DRO and Taper Attachment & Collet Closer

JET 322406 Lathe with ACU-RITE VUE DRO and Taper Attachment & Collet Closer - Uniquely designed exclusively by jet. Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized in the headstock. Includes factory warranty. D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings.

 

JET GH-1640ZX Lathe with ACU-RITE 200S Collet Closer

JET GH-1640ZX Lathe with ACU-RITE 200S Collet Closer

JET GH-1640ZX Lathe with ACU-RITE 200S Collet Closer - Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Uniquely designed exclusively by jet. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Iso 9001 certified manufacturer.

 

JET 321526 Lathe with 200S DRO Collet Closer

JET 321526 Lathe with 200S DRO & Collet Closer

JET 321526 Lathe with 200S DRO & Collet Closer - Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Uniquely designed exclusively by jet. Hardened and ground gears are featured in the headstock and gearbox.

 

JET CC-GHB1340A Collet Closer for 321357A

JET CC-GHB1340A, Collet Closer for 321357A

JET CC-GHB1340A, Collet Closer for 321357A - Some drilling and other modification may be required. Rear mounted lever action. Specially designed for each model. Precision ground components. Uses 5c collets.

 

JET GH-1340W-3 Lathe with ACU-RITE 200S DRO Taper Attachment and Collet Closer Installed

JET GH-1340W-3 Lathe with ACU-RITE 200S DRO, Taper Attachment and Collet Closer Installed

JET GH-1340W-3 Lathe with ACU-RITE 200S DRO, Taper Attachment and Collet Closer Installed - Hardened and ground gears are featured in the headstock and gearbox. Uniquely designed exclusively by jet. Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings.

 

JET GH-1340W-3 Lathe with Collet Closer Installed

JET GH-1340W-3 Lathe with Collet Closer Installed

JET GH-1340W-3 Lathe with Collet Closer Installed - D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Hardened and ground gears are featured in the headstock and gearbox. Splined, not keyed, shafts are utilized. Uniquely designed exclusively by jet.

 

5C Collet Fixture Block Chuck HEX SQUARE Closer Rings Milling Lathe Mill Grinder

5C Collet Fixture Block Chuck HEX SQUARE Closer Rings Milling Lathe Mill Grinder

5C Collet Fixture Block Chuck HEX SQUARE Closer Rings Milling Lathe Mill Grinder - Made of steel hardened and ground to. 0005″. For fast set ups on milling, lathe, surface grinder & drill presses for parallel, square or hex shapes as well as for cross-hole drilling at 60º, 90º or 120º.

 

Jet 321173 GH-1440W-1 Geared Head Engine Lathe with Acu-Rite Vue DRO and Collet Closer 3HP 230460V 1PH

Jet 321173 GH-1440W-1 Geared Head Engine Lathe with Acu-Rite Vue DRO and Collet Closer 3HP 230/460V 1PH

Jet 321173 GH-1440W-1 Geared Head Engine Lathe with Acu-Rite Vue DRO and Collet Closer 3HP 230/460V 1PH - Uses 5c collets. Includes factory warranty. Precision ground components. Rear mounted lever action. Specially designed for each model.

 

JET GH-1440W-1 Lathe with NEWALL DP700 DRO and Collet Closer

JET GH-1440W-1 Lathe with NEWALL DP700 DRO and Collet Closer

JET GH-1440W-1 Lathe with NEWALL DP700 DRO and Collet Closer - Uniquely designed exclusively by jet. Headstock is constantly oiled during operation. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Splined, not keyed, shafts are utilized. Hardened and ground gears are featured in the headstock and gearbox.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.