18 Top Keyless Drill Chucks

 

Brand New 0-12 Ultra High Precision Keyless Drill Chuck with R8 Shank KDCRS-13R8T

Brand New 0-1/2″ Ultra High Precision Keyless Drill Chuck with R8 Shank; KDCRS-13R8T

Brand New 0-1/2″ Ultra High Precision Keyless Drill Chuck with R8 Shank; KDCRS-13R8T - Very high precision, high quality, these are the highest quality drill chucks that you will find out there you are looking at a high precision keyless drill chuck, with a capacity from 0, 1/2″, and has an integrated r8 shank to fit just about any milling machine that is out there. 00078, which is almost unheard of in a drill chuck. It includes the keyless drill chuck, and wrench as shown. These are self tightening drill chucks, with very high gripping power and very low runout, making these the best drill chucks out there like this. There is nothing out there better than these drill chucks, they are absolutely top of the line. (yes, plus or minus less than one thousandth of an inch). Runout on these chucks is +/-.

 

Keyless Drill Chuck - Universal 38-in 24 UNF Thread - Holds 132-38 08-10mm 132-38 Bits

Keyless Drill Chuck – Universal 3/8-in 24 UNF Thread – Holds 1/32-3/8″ 0.8-10mm 1/32-3/8″ Bits

Keyless Drill Chuck – Universal 3/8-in 24 UNF Thread – Holds 1/32-3/8″ 0.8-10mm 1/32-3/8″ Bits - Easy to replace your defective chuck with this replacement or upgrade you keyed chuck to keyless. Then using the existing screw/bolt from your old chuck, install the new chuck in the same manner. . To install this chuck to replace open the jaws on your old chuck all the way and remove the screw/bolt in the bottom middle of your old chuck. While holding the shaft unscrew your old or broken chuck. Package includes 1 drill chuck in bulk packaging. Screw the new chuck onto the drill or by using the drill’s own power in the opposite direction. Open the new keyless chuck jaws all the way.

 

Rohm 893352 Type 104-61 Extra-RV13 Metal Single Sleeve Keyless Drill Chuck with Radial Lock and Through-Hole 12-20 NC Thread 427mm Diameter 15-13mm Clamping Capacity

Rohm 893352 Type 104-61 Extra-RV13 Metal Single Sleeve Keyless Drill Chuck with Radial Lock and Through-Hole, 1/2″-20 NC Thread, 42.7mm Diameter, 1.5-13mm Clamping Capacity

Rohm 893352 Type 104-61 Extra-RV13 Metal Single Sleeve Keyless Drill Chuck with Radial Lock and Through-Hole, 1/2″-20 NC Thread, 42.7mm Diameter, 1.5-13mm Clamping Capacity - With through-hole for clockwise and anti-clockwise rotation (security screw m 5 or m 6). With carbide inserts in the clamping jaws (size 13). Rohm keyless drill chucks in plastic or metal design with radial locking, for corded and cordless drills, for percussion drilling, with hexagon for assembling and disassembling on the machine spindle. One-piece design without retaining ring for machines with spindle stop.

 

38 Keyless Drill Chuck Adaptor for Cordless Impact Driver

3/8″ Keyless Drill Chuck Adaptor for Cordless Impact Driver

3/8″ Keyless Drill Chuck Adaptor for Cordless Impact Driver - Instant conversion from driving to drilling using the 1/4-inch hex quick connect shank. Fiber re-enforced composite material provides strength. 3-jaw chuck works with drill bits up to 3/8″. Free shipping same day on all orders in by 300 pm, no minimum.

 

Jacobs 31050 3000 Series 38-Inch SoftGrip Sleeve Keyless Drill Chuck with 38 to 24 Mount

Jacobs 31050 3000 Series 3/8-Inch SoftGrip Sleeve Keyless Drill Chuck with 3/8 to 24 Mount

Jacobs 31050 3000 Series 3/8-Inch SoftGrip Sleeve Keyless Drill Chuck with 3/8 to 24 Mount - With this patented softgrip sleeve design, the jacobs 31050 3000 series softgrip 3/8-inch keyless chuck not only increases the comfort level when tightening the bit, but also prevents hands from being irritated during frequent tightening. Upgrade it now, and get a better grip the jacobs 31050 3000 series softgrip 3/8-inch keyless drill chuck comes with one year factory warranty. More importantly, the jacobs 31050 3000 series softgrip 3/8-inch keyless drill chuck allows users to apply more input torque, therefore, more output torque is applied to the drill bit, which eliminates the bit slippage problem. The patented softgrip sleeve allows users to tighten the drill bit faster and easier. Technical details 3/8-inch capacity (1. The jacobs 31050 3000 series softgrip 3/8-inch keyless drill chuck with 3/8 to 24 threaded mount is one of the best drill chucks for 3/8-inch rotary drills. 0 to 10 mm) 3/8 to 24 threaded mount patented softgrip sleeve for easier tightening and better grip torque more comfortable from the manufacturer get a better grip. This jacobs 3000 series softgrip 3/8-inch keyless chuck is noticeably easier to grip than a traditional hard metal or plastic chuck.

 

2-13mm Capacity 12-20 UNF Mount SDS Plus Shank Keyless Drill Chuck Black

2-13mm Capacity 1/2-20 UNF Mount SDS Plus Shank Keyless Drill Chuck Black

2-13mm Capacity 1/2-20 UNF Mount SDS Plus Shank Keyless Drill Chuck Black - Mount 1/2-20unfchuck size(approx) 62 x 42cm/24″ x 17″ (ld). Product name keyless drill chuckcapacity 2-13mm/008-05″. Package content 1 x keyless drill chuck 1 x sds plus shank. Shank size 7 x 1 x 2cm/28″ x 04″ x 08″ (lshank dia maxd)color black. Material metal, plasticnet weight 307g.

 

Jacobs 31051 12 SoftGrip Single Sleeve Keyless Drill Chuck

Jacobs 31051 1/2″ SoftGrip Single Sleeve Keyless Drill Chuck

Jacobs 31051 1/2″ SoftGrip Single Sleeve Keyless Drill Chuck - Steel keyless drill chuck designed for comfortable use, even during frequent tightening. Ideal for rotary drills and can also be used on hammer drills faster bit change, helps user to tighten bits quickly and easily steel construction for strength and durability helps make it easy to apply more input torque to help reduce bit slippage for 1/2″ drills with a spindle lock 1/16″, 1/2″ capacity 1/2-20 (13mm) mount fits 1/2″ dewalt, black & decker, milwaukee, makita, skil, bosch, craftsman and most major brands. The jacobs chuck softgrip 1/2 in. Single-sleeve design. Soft sleeve resists surface marring.

 

Presa 10111 14-in Keyless Drill Chuck Black

Presa 10111 1/4-in Keyless Drill Chuck, Black

Presa 10111 1/4-in Keyless Drill Chuck, Black - Easily switch between drilling and driving. Holds drill bits up to 1/4 inch in diameter. Driver shank is 1/4″ hex. Converts any cordless screwdriver into a drill or grinder. Eliminate the need to buy a whole new bit set for your driver.

 

Yakamoz 03-65mm Keyless Drill Chuck Conversion Tool 14 inch Hex Shank Quick Change Adapter Converter

Yakamoz 0.3-6.5mm Keyless Drill Chuck Conversion Tool 1/4 inch Hex Shank Quick Change Adapter Converter

Yakamoz 0.3-6.5mm Keyless Drill Chuck Conversion Tool 1/4 inch Hex Shank Quick Change Adapter Converter - Use in automotives, garages, warehouses, offices, home and etc. General hexagon handle input connection rod from 03mm to 65mm. Instantly convert impact driver to hold non-quick change drill & driver bits. Easily the locks and releases drill bits, quickly convert your quick change hex shank driver unto a drill. Hold drill bits and accessories up to 14 inch diameter.

 

In-tool-home Impact Performance Series SDS Plus Shank Socket Adapter 12-20UNF Keyless Drill Chuck for Electric Hammer Capacity 12 Inch

In-tool-home Impact Performance Series SDS Plus Shank Socket Adapter 1/2-20UNF Keyless Drill Chuck for Electric Hammer Capacity 1/2 Inch

In-tool-home Impact Performance Series SDS Plus Shank Socket Adapter 1/2-20UNF Keyless Drill Chuck for Electric Hammer Capacity 1/2 Inch - 06″ -1/2″ mount1/2-20unf package include 1 x keyless chuck 1 x 1/2 sds shank. Instantly convert impact driver to hold non-quick change drill & driver bits keyless chuck finger-tightens for easy bit changes quick-change sds shank for electric hammer capacity range 0.

 

14inch Keyless Drill Chuck Hex Shank Adapter Converter Quick Change 03-34mm

1/4inch Keyless Drill Chuck Hex Shank Adapter Converter Quick Change 0.3-3.4mm

1/4inch Keyless Drill Chuck Hex Shank Adapter Converter Quick Change 0.3-3.4mm - Instantly convert impact driver to hold non-quick change drill & driver bits. Quickly convert your quick change hex shank driver into a drill. Unlimited use in automotives, garages, warehouses, offices, homes etc. Keyless chuck finger-tightens for easy bit changes. 100% brand new and high quality.

 

316-34 3JT PRO-SERIES KEYLESS DRILL CHUCK JT3-58 STRAIGHT SHANK ARBOR CNC

3/16-3/4″ 3JT PRO-SERIES KEYLESS DRILL CHUCK & JT3-5/8″ STRAIGHT SHANK ARBOR CNC

3/16-3/4″ 3JT PRO-SERIES KEYLESS DRILL CHUCK & JT3-5/8″ STRAIGHT SHANK ARBOR CNC - 1 pc- 1/2″ straight shank to jacobs taper #3 (3jt) arbor. Includes 1 pc- 3/16″, 3/4″ x 3jt premium keyless drill chuck. High quality, heavy-duty ball bearing design for long tool life. Our part # all-49887. Drill chuck designed for drilling applications on portable bench, floor type drill presses, mills, lathes & more smooth jaw movement with advanced gripping torque.

 

Llambrich 58 JK-Solid Precision Keyless Drill Chuck with Integrated R8 Shank JK-160 R8

Llambrich 5/8″ JK-Solid Precision Keyless Drill Chuck with Integrated R8 Shank JK-160 R8

Llambrich 5/8″ JK-Solid Precision Keyless Drill Chuck with Integrated R8 Shank JK-160 R8 - A high precision keyless drill chuck, with the advantage that the arbor is integrated into the drill chuck. Drill capacity 1/8, 5/8″. The jk-solid is a high precision integrated shank keyless drill chuck the one piece construction offers a tighter tolerance on tir. Greater rigidity and precision. 100% of jk-solid drill chucks are individually controlled to ensure a maximum total indicator run-out of 00016″.

 

132-58 3JT PRO-SERIES KEYLESS DRILL CHUCK JT3-3MT TANGED TANG ARBOR MT3

1/32-5/8″ 3JT PRO-SERIES KEYLESS DRILL CHUCK & JT3-3MT TANGED TANG ARBOR MT3

1/32-5/8″ 3JT PRO-SERIES KEYLESS DRILL CHUCK & JT3-3MT TANGED TANG ARBOR MT3 - 1 pc- tang-style morse taper #3 (3mt) to jacobs taper #3 (3jt) arbor. Our part # all-49912. Drill chuck designed for drilling applications on portable bench, floor type drill presses, mills, lathes & more smooth jaw movement with advanced gripping torque. High quality, heavy-duty ball bearing design for long tool life. Includes 1 pc- 1/32″, 5/8″ x 3jt premium keyless drill chuck.

 

In-tool-home Impact Performance Series Hex Shank Socket Adapter 38-24UNF Keyless Drill Chuck for Electric Hand Drill Capacity 38 Inch

In-tool-home Impact Performance Series Hex Shank Socket Adapter 3/8-24UNF Keyless Drill Chuck for Electric Hand Drill Capacity 3/8 Inch

In-tool-home Impact Performance Series Hex Shank Socket Adapter 3/8-24UNF Keyless Drill Chuck for Electric Hand Drill Capacity 3/8 Inch - 02″ -3/8″ mount3/8-24unf package include 1 x keyless chuck 1 x 3/8 hex shank. Instantly convert impact driver to hold non-quick change drill & driver bits keyless chuck finger-tightens for easy bit changes quick-change hex shank for electric drill capacity range 0.

 

164-14 1JT PRO-SERIES KEYLESS DRILL CHUCK JT1-R8 ARBOR SHANK ADAPTER CNC

1/64-1/4″ 1JT PRO-SERIES KEYLESS DRILL CHUCK & JT1-R8 ARBOR SHANK ADAPTER CNC

1/64-1/4″ 1JT PRO-SERIES KEYLESS DRILL CHUCK & JT1-R8 ARBOR SHANK ADAPTER CNC - Includes 1 pc- 1/64″, 1/4″ x 1jt premium keyless drill chuck. Drill chuck designed for drilling applications on portable bench, floor type drill presses, mills, lathes & more smooth jaw movement with advanced gripping torque. High quality, heavy-duty ball bearing design for long tool life. 1 pc- r8 shank to jacobs taper #1 (1jt) arbor works great on bridgeport and all other machines that hold r8 tooling. Our part # all-49895.

 

HHIP 3701-2500 0-12 Inch MT3 Integrated Keyless Drill Chuck

HHIP 3701-2500 0-1/2 Inch MT3 Integrated Keyless Drill Chuck

HHIP 3701-2500 0-1/2 Inch MT3 Integrated Keyless Drill Chuck - Maximum tir does not exceed 002″ keyless, self tightening design. Integrated design maximizes rigidity & accuracy. Integral shank is more compact than a combined drill chuck and arbor and eliminates the chuck slipping on its arbor. Clamping capacity 0~1/2″ shank mt3.

 

Drillpro 2-13mm Solid Steel Keyless Drill Chuck - Universal 38-in 24 UNF Thread with Removable 14 Quick Change Shank Shank

Drillpro 2-13mm Solid Steel Keyless Drill Chuck – Universal 3/8-in 24 UNF Thread with Removable 1/4” Quick Change Shank Shank

Drillpro 2-13mm Solid Steel Keyless Drill Chuck – Universal 3/8-in 24 UNF Thread with Removable 1/4” Quick Change Shank Shank - Good metal texture, comfortable coat surface. Fits many brands and models with a 3/8 inch 24unf mount. Keyless chuck size 70 x 42mm round handle size 50 x 9mm. Capacity 2 mm to 13 mm / 007 inch to 05 inch. Keyless chuck universal fit for 3/8-in 24unf compatible drills.