18 Most Wanted Panel Clamps

 

Automatic Grip Door and Panel Clamp - Adjusts 34 - 2 Thickness 5 x 11-12 x 2-14

Automatic Grip Door and Panel Clamp – Adjusts: 3/4″ – 2″ Thickness, 5″ x 11-1/2″ x 2-1/4″

Automatic Grip Door and Panel Clamp – Adjusts: 3/4″ – 2″ Thickness, 5″ x 11-1/2″ x 2-1/4″ - Adjusts from 3/4″ to 2″ door or panel thickness will support solid core doors and panels. Self-adjusting, foam-padded jaw clamps door firmly size 5″ x 11-1/2″ x 2-1/4″. Capable of being mounted to moveable objects normally present at a worksite (including tool boxes). Holds door in an upright position for edge-routing and planing operations.

 

1-38x1-38 Panel Clamp by Stephens Pipe Steel

1-3/8×1-3/8 Panel Clamp by Stephens Pipe & Steel

1-3/8×1-3/8 Panel Clamp by Stephens Pipe & Steel - 200 lbs. Upc 754761785088weight 1.

 

CRL Oil Rubbed BronzeNo-Drill Fixed Panel Glass Clamp for 14 Glass

CRL Oil Rubbed BronzeNo-Drill Fixed Panel Glass Clamp for 1/4″ Glass

CRL Oil Rubbed BronzeNo-Drill Fixed Panel Glass Clamp for 1/4″ Glass - Two nylon tipped set screws are tightened to secure the glass. Mounting screws are also provided for the wall/ceiling/floor. Silicone must also be used for reinforcement along all glass edges where clamps are used. Made of solid brass, and available in numerous stock finishes, these crl no-drill fixed panel clamps provide an alternative to clamps requiring drilled holes or notches in the glass.

 

1-38x1-38 Panel Clamp by Stephens Pipe Steel

1-3/8×1-3/8 Panel Clamp by Stephens Pipe & Steel

1-3/8×1-3/8 Panel Clamp by Stephens Pipe & Steel - No-drill fixed panel clamps allow securing of fixed panels of glass, but only under certain circumstances. 1-3/8×1-3/8 panel clamp. Includes clear gaskets and mounting screws. No glass fabrication required. For 1/4″ (6 mm) glass.

 

CRL Brushed Bronze No-Drill Fixed Panel Glass Clamp for 14 Glass

CRL Brushed Bronze No-Drill Fixed Panel Glass Clamp for 1/4″ Glass

CRL Brushed Bronze No-Drill Fixed Panel Glass Clamp for 1/4″ Glass - D. D. 6 mm) o. Height 13/16 in (20. Mounting screw is provided for wall/ceiling/floor. Minimum order is one each. Depth 9/16 in (14. Made of solid brass includes clear gaskets and mounting screw for glass thickness 1/4″ (6 mm) the crl no-drill fixed panel glass clamp is made of solid brass, and is available in numerous stock finishes. Color brushed bronze width 1-9/16 in (39. Nylon tipped screw should be tightened to clamp glass. Silicone must be used for reinforcement along all glass edges where clamps are used. 3 mm). This clamp provides an alternative to clamps requiring drilled holes or notches in the glass. 7 mm) o.

 

9 Locking Panel Clamp Tools Equipment Hand Tools

9″” Locking Panel Clamp Tools Equipment Hand Tools

9″” Locking Panel Clamp Tools Equipment Hand Tools - The shipping weight reflected is the dimensional weight. This product also meets the large package requirement per ups/fedex. Features and benefits provides quick clamping and alignment of auto body panels bottom jaw slides in a straight line motion turn screw to adjust pressure and fit work stays adjusted for repetitive use constructed of high-grade heat treated alloy steel for maximum toughness and durability classic trigger release designed to provide maximum locking force this product meets the oversized requirement per ups/fedex. The estimated shipping cost will include this fee.

 

Stephens Pipe Steel 1-38X1-38 Panel Clamp HD19010RP087053 by STEPHENS PIPE STEEL

Stephens Pipe & Steel 1-3/8X1-3/8 Panel Clamp HD19010RP/087053 by STEPHENS PIPE & STEEL

Stephens Pipe & Steel 1-3/8X1-3/8 Panel Clamp HD19010RP/087053 by STEPHENS PIPE & STEEL - For 1/4″ (6 mm) glass. 1-3/8×1-3/8 panel clamp. Includes clear gaskets and mounting screws. No-drill fixed panel clamps allow securing of fixed panels of glass, but only under certain circumstances.

 

92299 Midget Panel Clamp Set 5pc By Toolconnection

92299 Midget Panel Clamp Set 5pc By Toolconnection

92299 Midget Panel Clamp Set 5pc By Toolconnection - Selected steel. Allows the door to be shut to check alignment. Ideal for door panel and pillars. Time saver. Please leave feed back as we value all our customers’ comments.

 

Chain Link Fence PANEL CLAMPS ~ KENNEL CLAMPS set of 8 for 1-38 chain link fence pipe panel frames For Dog kennels  dog runs or tempory chain link fence Saddle clamps Chain link fence parts for connecting panels ~ farm fencing systems

Chain Link Fence PANEL CLAMPS ~ KENNEL CLAMPS: (set of 8) for 1-3/8″ chain link fence pipe panel frames. For Dog kennels / dog runs, or tempory chain link fence. Saddle clamps. Chain link fence parts for connecting panels ~ farm fencing systems.

Chain Link Fence PANEL CLAMPS ~ KENNEL CLAMPS: (set of 8) for 1-3/8″ chain link fence pipe panel frames. For Dog kennels / dog runs, or tempory chain link fence. Saddle clamps. Chain link fence parts for connecting panels ~ farm fencing systems. - Chain link panel clamps for chain link fence temporary panel sections. These clamps fit a chain link fence pipe 1-3/8″. Includes carriage bolt and nut clamps, bolts, and nuts = galvanized. Aka saddle clamp. Also kennel clamps for chain link dog kennels (or chain link dog runs).

 

Master Halco Panel Clamp 1-38  X 1-38  Galvanized Bagged

Master Halco Panel Clamp 1-3/8 ” X 1-3/8 ” Galvanized Bagged

Master Halco Panel Clamp 1-3/8 ” X 1-3/8 ” Galvanized Bagged - Bagged. 1-3/8″ x 1-3/8″. For clamping panels of chain link fencing. And pet kennels ace no 7020142, 7020159, and 7025232. 2 sets/package.

 

CR LAURENCE NDC6BN CRL Brushed Nickel No-Drill Fixed Panel Glass Clamp

C.R. LAURENCE NDC6BN CRL Brushed Nickel No-Drill Fixed Panel Glass Clamp

C.R. LAURENCE NDC6BN CRL Brushed Nickel No-Drill Fixed Panel Glass Clamp - Color brushed nickel width 1-9/16 in (39. 7 mm) o. Depth 9/16 in (14. Height 13/16 in (20. D. Nylon tipped screw should be tightened to clamp glass. D. 6 mm) o. Made of solid brass includes clear gaskets and mounting screw for glass thickness 1/4″ (6 mm) the crl no-drill fixed panel glass clamp is made of solid brass, and is available in numerous stock finishes. Mounting screw is provided for wall/ceiling/floor. Minimum order is one each. This clamp provides an alternative to clamps requiring drilled holes or notches in the glass. 3 mm). Silicone must be used for reinforcement along all glass edges where clamps are used.

 

CR LAURENCE BS60BN CRL Brushed Nickel Beretta End Mount Light-Duty Fixed Panel Clamp

C.R. LAURENCE BS60BN CRL Brushed Nickel Beretta End Mount Light-Duty Fixed Panel Clamp

C.R. LAURENCE BS60BN CRL Brushed Nickel Beretta End Mount Light-Duty Fixed Panel Clamp - Color brushed nickel. Clear gaskets and stainless steel securing plates included. For use with 3/8″ to 1/2″ (10 to 12 mm) thick tempered glass fastened with set screws, no notches or holes needed in the glass available in polished chrome and brushed nickel finishes non-handed the beretta end mount light-duty fixed panel clamp can be used to secure glass panels adjacent to the door, or transom panels above the door. This hardware requires no glass fabrication, making installation quick and easy.

 

Master Halco Panel Clamp 1-38  X 1-38  Galvanized Bagged

Master Halco Panel Clamp 1-3/8 ” X 1-3/8 ” Galvanized Bagged

Master Halco Panel Clamp 1-3/8 ” X 1-3/8 ” Galvanized Bagged - 2 sets/package. For clamping panels of chain link fencing. 1-3/8 x 1-3/8. And pet kennels ace no 7020142, 7020159, and 7025232. Bagged.

 

CRL Chrome Square Style Notch-in-Glass Fixed Panel U-Clamp

CRL Chrome Square Style Notch-in-Glass Fixed Panel U-Clamp

CRL Chrome Square Style Notch-in-Glass Fixed Panel U-Clamp - Specifications material forged solid brass glass thickness range 3/8 to 1/2 inch (10 to 12 millimeter) fabrication required 3/4 inch (19 millimeter) holes for glass-to-glass clamps, notch for wall mount clamps includes mounting screws (for wall clamps) and gaskets. Two mounting screws are included per clamp. Color chrome width 2 in (51 mm) height 2 in (51 mm) minimum order 1 each note image shows front and back, although these are sold individually. 6 millimeter) clearance. Clear silicone can be used to seal the gap and provide a clean, water-tight appearance. The notch required in the panel allows for a 1/16 inch (1. Forged extra thick glass clamps solid brass for 3/8″ to 1/2″ glass (10 to 12 mm) crl square style notch-in-glass clamps mount directly to the wall, ceiling or floor to secure vertical fixed glass panels. Drawings and templates are available.

 

9 Locking Panel Clamp

9″” Locking Panel Clamp

9″” Locking Panel Clamp - The estimated shipping cost will include this fee. This product also meets the large package requirement per ups/fedex. Features and benefits provides quick clamping and alignment of auto body panels bottom jaw slides in a straight line motion turn screw to adjust pressure and fit work stays adjusted for repetitive use constructed of high-grade heat treated alloy steel for maximum toughness and durability classic trigger release designed to provide maximum locking force this product meets the oversized requirement per ups/fedex. The shipping weight reflected is the dimensional weight.

 

CR LAURENCE BS60CH CRL Chrome Beretta End Mount Light-Duty Fixed Panel Clamp

C.R. LAURENCE BS60CH CRL Chrome Beretta End Mount Light-Duty Fixed Panel Clamp

C.R. LAURENCE BS60CH CRL Chrome Beretta End Mount Light-Duty Fixed Panel Clamp - Clear gaskets and stainless steel securing plates included. The crl beretta end mount light-duty fixed panel clamp can be used to secure glass panels adjacent to the door, or transom panels above the door. . This hardware requires no glass fabrication, making installation quick and easy.

 

Vise Grip 9AC 9 Inch Locking Panel Clamp Pliers

Vise Grip 9AC 9 Inch Locking Panel Clamp Pliers

Vise Grip 9AC 9 Inch Locking Panel Clamp Pliers - Capacity 3/8 jaw depth 3-1/8. Guarded release trigger quickly unlocks and protects from accidental release size 8 throat depth. Turn screw to adjust pressure and fit work stays adjusted for repetitive use. Provides quick clamping and alignment of auto body panels bottom jaw slides in a straight-line motion.

 

Irwin Vise-grip 9 Locking Panel Clamp Locking Plier 38 Jaw Capacity Tool 9ac

Irwin Vise-grip 9″ Locking Panel Clamp Locking Plier 3/8″ Jaw Capacity Tool 9ac

Irwin Vise-grip 9″ Locking Panel Clamp Locking Plier 3/8″ Jaw Capacity Tool 9ac - Locking pliers panel clamp tool 9 long jaw opening 3/8″ provides quick clamping and”. Irwin vise-grip 9 locking panel clamp locking plier 3/8″ jaw capacity tool 9ac vise grip”. Alignment of auto body panels bottom jaw slides in a straight-line motion turn screw to. Heat-treated alloy steel for maximum toughness and durability guarded release trigger. Adjust pressure and fit work stays adjusted for repetitive use constructed of high-grade.