18 Most Wanted Hand Flutes for 2019

 

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 18 Body Diameter 1-12 Overall Length #ad

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length #ad - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 34180 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 18 Body Diameter 1-12 Overall Length #ad

KEO 34180 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length

KEO 34180 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length #ad - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

KEO 33143 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 14 Body Diameter 2-12 Overall Length #ad

KEO 33143 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length

KEO 33143 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length #ad - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

KEO 38123 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 82 Degree Point Angle 12 Body Diameter 3-34 Overall Length #ad

KEO 38123 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 1/2″ Body Diameter, 3-3/4″ Overall Length

KEO 38123 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 1/2″ Body Diameter, 3-3/4″ Overall Length #ad - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

KEO 33100 High-Speed Steel NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 1 Body Diameter 6 Overall Length #ad

KEO 33100 High-Speed Steel NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length

KEO 33100 High-Speed Steel NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length #ad - Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 33103 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 1 Body Diameter 6 Overall Length #ad

KEO 33103 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length

KEO 33103 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length #ad - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

KEO 34313 Solid Carbide NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 516 Body Diameter 2-12 Overall Length #ad

KEO 34313 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length

KEO 34313 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

CNBTR 150 Straight Shank 8 Blades HSS Hand Flute Taper Pin Reamer Reaming Hand Tool 3mm #ad

CNBTR 1:50 Straight Shank 8 Blades HSS Hand Flute Taper Pin Reamer Reaming Hand Tool (3mm)

CNBTR 1:50 Straight Shank 8 Blades HSS Hand Flute Taper Pin Reamer Reaming Hand Tool (3mm) #ad - Excellent processing technique, it can let your engraving more stable precise. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed the bladed product is not use for people under 18 years the item is only use for industrial cutting/engraving, not hazardous article. Made of solid carbide,high quality tools. Applicationmajority of plastics ,wood,fibre glass,carbon,pcb board.

 

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 18 Body Diameter 1-12 Overall Length #ad

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

KEO 34384 Solid Carbide High Performance NC Spotting Drills Uncoated Bright Finish Round Shank Right Hand Flute 142 Degree Point Angle 38 Body Diameter 2-12 Overall Length #ad

KEO 34384 Solid Carbide High Performance NC Spotting Drills, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 142 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length

KEO 34384 Solid Carbide High Performance NC Spotting Drills, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 142 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

KEO 33100 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 1 Body Diameter 6 Overall Length #ad

KEO 33100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length

KEO 33100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length #ad - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 34312 Solid Carbide NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 90 Degree Point Angle 516 Body Diameter 2-12 Overall Length #ad

KEO 34312 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length

KEO 34312 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 5/16″ Body Diameter, 2-1/2″ Overall Length #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems.

 

KEO 34140 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 14 Body Diameter 2-12 Overall Length #ad

KEO 34140 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length

KEO 34140 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 316 Body Diameter 2 Overall Length #ad

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

KEO 33342 High-Speed Steel NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 34 Body Diameter 8 Overall Length #ad

KEO 33342 High-Speed Steel NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/4″ Body Diameter, 8″ Overall Length

KEO 33342 High-Speed Steel NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/4″ Body Diameter, 8″ Overall Length #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems.

 

Chicago Latrobe 157L High-Speed Steel Short Length Drill Bit Uncoated Bright Round Shank Left Hand Flute 118 Degree Conventional Point Wire Size 11 Pack of 12 #ad

Chicago Latrobe 157L High-Speed Steel Short Length Drill Bit, Uncoated (Bright), Round Shank, Left Hand Flute, 118 Degree Conventional Point, Wire Size #11 (Pack of 12)

Chicago Latrobe 157L High-Speed Steel Short Length Drill Bit, Uncoated (Bright), Round Shank, Left Hand Flute, 118 Degree Conventional Point, Wire Size #11 (Pack of 12) #ad - Left-hand helix drills can substitute for screw extractors. Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates. Manufactured from premium high-speed steel, 118 degree point. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Left-hand helix geometry for drilling in a wide range of operating conditions and materials where the machine spindle rotates counter-clockwise.

 

KEO 32100 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 1 Body Diameter 6 Overall Length #ad

KEO 32100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length

KEO 32100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length #ad - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

KEO 34189 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 142 Degree Point Angle 316 Body Diameter 2 Overall Length #ad

KEO 34189 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 142 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length

KEO 34189 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 142 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length #ad - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.