18 Best Grooved Pulleys in 2020

 

Single V Grooved Pulley 38 #ad

Single V Grooved Pulley, 3/8″

Single V Grooved Pulley, 3/8″ #ad - The chicago die-cast, single v-grooved pulley is for a belts size 4l or 1/2 by 11/32 inches. Dimensions 2. Has slotted headless set screw. 2-inch diameter with 3/8-inch bore. Packed in sta-pak cartons.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3-12  Dia X 34  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3-1/2 ” Dia X 3/4 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3-1/2 ” Dia X 3/4 ” Bore Bulk #ad - Chicago die casting. Chicago die casting #350a7 3/4×3-1/2 pulley.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3  Dia X 58  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3 ” Dia X 5/8 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3 ” Dia X 5/8 ” Bore Bulk #ad - Chicago die casting #300a6 5/8×3 pulley. Chicago die casting.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2  Dia X 34  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk #ad - Chicago die casting #200a7 3/4×2 pulley. Chicago die casting.

 

Boston Gear G1214 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass #ad

Boston Gear G1214 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1214 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass #ad - Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. . The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight.

 

Boston Gear G1202 Plain Grooved Pulley 0500 Bore Fits Round Belts 0375 or Smaller 0500 Face 0938 Hub Diameter 1000 Outside Diameter Iron #ad

Boston Gear G1202 Plain Grooved Pulley, 0.500″ Bore, Fits Round Belts 0.375″ or Smaller, 0.500″ Face, 0.938″ Hub Diameter, 1.000″ Outside Diameter, Iron

Boston Gear G1202 Plain Grooved Pulley, 0.500″ Bore, Fits Round Belts 0.375″ or Smaller, 0.500″ Face, 0.938″ Hub Diameter, 1.000″ Outside Diameter, Iron #ad - Pulley fits round-profile belts (not included) up to 0375″ diameter. Double flange to resist belt side thrust and maintain belt contact. One groove for single-belt fractional horsepower use. Class 30 gray cast iron for resistance to wear and galling. Set screw locks hub to shaft.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3  Dia X 58  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3 ” Dia X 5/8 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3 ” Dia X 5/8 ” Bore Bulk #ad - Chicago die casting. Chicago die casting #300a6 5/8×3 pulley.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2  Dia X 12  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 1/2 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 1/2 ” Bore Bulk #ad - 200a 1/2. Chicago die casting. Pulleys.

 

Boston Gear G1218 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass #ad

Boston Gear G1218 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1218 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass #ad - Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2  Dia X 12  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 1/2 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 1/2 ” Bore Bulk #ad - 200a 1/2. Chicago die casting. Pulleys.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3  Dia X 12  Bore Bulk by Chicago Die Casting #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3 ” Dia X 1/2 ” Bore Bulk by Chicago Die Casting

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 3 ” Dia X 1/2 ” Bore Bulk by Chicago Die Casting #ad - 1/2″. Chicago die cast single v grooved pulley a section belt width 3 ” dia x 1/2 ” bore bulk.

 

Boston Gear G1216 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass #ad

Boston Gear G1216 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1216 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass #ad - Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 4  Dia X 58  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 4 ” Dia X 5/8 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 4 ” Dia X 5/8 ” Bore Bulk #ad - Chicago die casting. Chicago die casting #400a6 5/8×4 pulley.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2-12  Dia X 58  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2-1/2 ” Dia X 5/8 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2-1/2 ” Dia X 5/8 ” Bore Bulk #ad - Chicago die casting. Chicago die casting #250a6 5/8×2-1/2 pulley.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6  Dia X 34  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6 ” Dia X 3/4 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6 ” Dia X 3/4 ” Bore Bulk #ad - Chicago die casting #600a7 3/4×6 pulley. Chicago die casting.

 

Boston Gear G1219 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass #ad

Boston Gear G1219 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1219 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass #ad - Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard.

 

Chicago Die Cast Single V Grooved Pulley A 2 in x-Mfg 200A6 - Sold As 7 Units #ad

Chicago Die Cast Single V Grooved Pulley A 2 in. x-Mfg# 200A6 – Sold As 7 Units

Chicago Die Cast Single V Grooved Pulley A 2 in. x-Mfg# 200A6 – Sold As 7 Units #ad - Electrolux oxygen el7020b. Electrolux oxygen el7055bz. Electrolux oxygen el7055b. Electrolux oxygen el7024a. Electrolux oxygen el7020bz. This roller brush is designed to fit models.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 4  Dia X 12  Bore Bulk #ad

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 4 ” Dia X 1/2 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 4 ” Dia X 1/2 ” Bore Bulk #ad - Chicago die casting. Chicago die casting #400a5 1/2×4 pulley.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.