18 Best and Coolest Tile Saws

 

MK Diamond 157222 MK-170 13-Horsepower 7-Inch Bench Wet Tile Saw

MK Diamond 157222 MK-170 1/3-Horsepower 7-Inch Bench Wet Tile Saw

MK Diamond 157222 MK-170 1/3-Horsepower 7-Inch Bench Wet Tile Saw - Includes saw, 7-inch diamond blade, submersible water pump, adjustable rip guide. 15 pounds 1-year warranty. 7-inch bench wet tile saw. High-impact thermoplastic water reservoir will not rust or peel. 1/3-horsepower engine for high torque (5500 rpm) and power.

 

Husqvarna Construction 542203252 Tilematic Folding Steel Tile Saw Stand - STAND ONLY

Husqvarna Construction 542203252 Tilematic Folding Steel Tile Saw Stand – STAND ONLY

Husqvarna Construction 542203252 Tilematic Folding Steel Tile Saw Stand – STAND ONLY - This folding steel stand will support husqvarna tilematic ts 250x, target dilemmatic g2, and felker tilemaster plus tile saws. Set your saw up on a stand and make work easier. . Stand easily folds for storage and transport.

 

MK Diamond 153243-JCS MK-101 Pro24 Tile Saw with JCS Stand

MK Diamond 153243-JCS MK-101 Pro24 Tile Saw with JCS Stand

MK Diamond 153243-JCS MK-101 Pro24 Tile Saw with JCS Stand - Depth of cut is 3 inches. Dimensions of 48 by 24 by 29 inches. In addition it is equipped with an aluminum table with nonslip molded neoprene surface. Mk diamond 153243-jcs mk-101 pro24 tile saw with jcs stand has all the features of the mk-101 but with an extended frame that allows the cutting of tiles up to 24 inches in length and an integrated stand that allows operator to set up or transport in a matter of seconds. Blade capacity of 10 inches. Length of cut is 24 inches. The permanently lubricated blade shaft bearings provide years of maintenance-free operation. The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate a profile wheel. Blade has 3,450 revolutions per minute. Horse power of 1-1/2 hp. Voltage of 120 volts. Diagonally cuts 18 inch tile. Overall weight of 156 pounds. Csa approved. Arbor size of 5/8 inch.

 

MK Diamond 151991-SP 15 HP 10 in Wet Cutting Tile Saw

MK Diamond 151991-SP 1.5 HP 10 in. Wet Cutting Tile Saw

MK Diamond 151991-SP 1.5 HP 10 in. Wet Cutting Tile Saw - The one-piece unitized steel frame is built for increased durability. Features fully enclosed high-torque, fan-cooled motor permanently lubricated, dual-sealed, heavy-duty blade shaft bearings multi-position motor post cutting head for convenient cutting of various tile sizes built-in water distribution system supplies water to both sides of the blade variable height cutting head allows for plunge cutting and use of blades smaller than 10 inches in diameter blade guard accomodates 6 inch and 8 inch profile wheels includes 10″ wet cutting diamond blade water pump rip guide 45 degree miter. The mk-101 saw features a powerful, high torque motor for improved performance to tackle all cutting jobs. The blade guard has been engineered to provide optimal water flow. One-year limited warranty. Ships from california.

 

DEWALT D24001 Tile Saw Stand for D24000 Tile-Saw

DEWALT D24001 Tile Saw Stand for D24000 Tile-Saw

DEWALT D24001 Tile Saw Stand for D24000 Tile-Saw - Folds for easy transport. Robust all-metal construction provides durability. Lightweight body folds flat for easy transport and storage. Backed by a 3-year limited manufacturer warranty. Adjusts to four height positions for user customization.

 

QEP 22650Q 650XT 34 HP 120-volt Tile Saw for Wet Cutting of Ceramic and Porcelain Tile

QEP 22650Q 650XT 3/4 HP 120-volt Tile Saw for Wet Cutting of Ceramic and Porcelain Tile

QEP 22650Q 650XT 3/4 HP 120-volt Tile Saw for Wet Cutting of Ceramic and Porcelain Tile - 8 in table extension is included for use on either side to support large tiles when cutting. Cuts ceramic tile, porcelain tile, marble, granite and stone. Powerful 3/4 hp motor generates up to 3,600 rpm for the most demanding installation jobs. Durable steel table and frame with rubber foot pads for stability. Flat table design provides unlimited tile size for rip and diagonal cuts.

 

QEP 4 in Diamond Blade for Wet or Dry Tile Saws for Ceramic Tile Model  6-4001Q

QEP 4 in. Diamond Blade for Wet or Dry Tile Saws for Ceramic Tile Model # 6-4001Q

QEP 4 in. Diamond Blade for Wet or Dry Tile Saws for Ceramic Tile Model # 6-4001Q - Qep 4 in. Diamond blade for wet or dry tile saws for ceramic tile model # 6-4001q exact specifications assuring the user a wobble-free blade that produces smooth and precise cuts diamond blade for long-lasting performance and minimal chipping designed for cutting ceramic tile arbor size of 5/8, 7/8 in. Rpm 15,000.

 

Water Tube Assembly for TargetFelker Tile Saws

Water Tube Assembly for Target/Felker Tile Saws

Water Tube Assembly for Target/Felker Tile Saws - Water tube assembly for husqvarna tilematic ts 250x, tilematic ts 250xl, target tilematic g2. As well as felker tilemaster plus, & tilemaster xl plus tile saw. Includes 1/4″ id tubing with “y” fitting.

 

Dremel US540-01 Ultra-Saw 35-Inch Tile Diamond Blade

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade - Cuts a variety of tile including wall tile, floor tile, porcelain, slate, stone, and cement backer board. May also be used to remove grout. Diamond grit for tile cutting applications. No water needed. Cuts most tiles and masonry materials with ease and precision and no water needed.

 

612780-00 Replacement Submersible Tile Saw Pump Pe-1 Series Little Giant Replacement Tile Saw Pump

612780-00 Replacement Submersible Tile Saw Pump Pe-1 Series Little Giant Replacement Tile Saw Pump

612780-00 Replacement Submersible Tile Saw Pump Pe-1 Series Little Giant Replacement Tile Saw Pump - Rip fence scale0 to 45°. Fits the dewalt d24000 tile sawmeasures 3 5/8 inch x 3 1/2 inch x 2 3/4 inch1/4 inch mnpt dischargescreened inlet with 6 foot power cordalso fits most tile saws115volts100% submersibleuse also for dewatering, water features, water falls and statuary fountains. Waterproof on/off switch. Stand sold separately use with continuous rim blade, sold separately. Makes bevel cuts from 0 to 45° left.

 

Adjustable Rip Guide for TargetFelker Tile Saws

Adjustable Rip Guide for Target/Felker Tile Saws

Adjustable Rip Guide for Target/Felker Tile Saws - 15 pounds 1-year warranty. High-impact thermoplastic water reservoir will not rust or peel. Includes saw, 7-inch diamond blade, submersible water pump, adjustable rip guide. Rip guide. 7-inch bench wet tile saw.

 

25 Horsepower 10 Industrial TileBrick Saw

2.5 Horsepower 10″ Industrial Tile/Brick Saw

2.5 Horsepower 10″ Industrial Tile/Brick Saw - 24″ cutting capacity. Adjustable cutting head lets you adjust blade for standard tiles or bricks up to 3-1/2″ thick. Oversized steel frame with precision linear bar system for smooth operation. Powerful dual capacitor motor with sealed bearings and thermal overload protection. Head pivots to allow 225 and 45 degree bevel cuts.

 

Flex CS 40 Wet Tile Saw

Flex CS 40 Wet Tile Saw,

Flex CS 40 Wet Tile Saw, - A built-in gfci is also included. The powerful 12 amp motor makes it possible for the saw to cut through any tough material. The flex cs 40 wet tile saw is made for use in the stone, tile and glass industries. Includes a side handle for more stability and the cs 40 has the ability to accept a curved cutting blade thus making curve cutting operations safer and easier. The wet stone cutter is also equipped with a high quality water-feed system that will eliminate the harmful dust particles which are common in dry cutting applications.

 

Barwalt 70852 Extra Large Tile Saw Shack

Barwalt 70852 Extra Large Tile Saw Shack

Barwalt 70852 Extra Large Tile Saw Shack - Measurements 47-inch x 60-inch x 62-inch. All bolts are made out of stainless steel, fitted with aircraft nuts that will not fall off. The heavy gauge plastic sheeting used on the pan is industrial tough. The aluminum framework is well designed and will last many years. The velcro used at all attachment points is commercial grade.

 

QEP 22400Q 35 HP Torque Master Tile Saw 4-Inch

QEP 22400Q 3/5 HP Torque Master Tile Saw, 4-Inch

QEP 22400Q 3/5 HP Torque Master Tile Saw, 4-Inch - Tilting table with extension side table allows for easy miter cuts. Fully adjustable rip/angle. 3/5 hp high-torque geared motor is dependable and provides maximum cutting performance. Includes 4 in diamond blade, 2-side extension tables add 5 in to the width of the table to support larger tiles.

 

RIDGID 7 Portable Job Site Wet Tile Saw 65 Amp Induction Motor Power

RIDGID 7″ Portable Job Site Wet Tile Saw 6.5 Amp Induction Motor Power

RIDGID 7″ Portable Job Site Wet Tile Saw 6.5 Amp Induction Motor Power - The fence is simply the best on the market. It also extends forward. The t-square design sets up securely for repeatable cuts and slides effortlessly when adjustments are needed. Ridgid continues to provide best-in-class features on this table-top tile saw.

 

QEP 8 in Diamond Blade for Wet Tile Saws

QEP 8 in. Diamond Blade for Wet Tile Saws

QEP 8 in. Diamond Blade for Wet Tile Saws - Designed for wet cutting and long lasting performance. Continuous rim diamond blade provides accurate cutting with minimal chipping. The blade is specifically engineered for cutting ceramic tile. 875 to. 56 in. 7640 maximum rpm, arbor size of 0. The qep 6-8001q 8 in.

 

SKIL 3540-02 7-Inch Wet Tile Saw

SKIL 3540-02 7-Inch Wet Tile Saw

SKIL 3540-02 7-Inch Wet Tile Saw - Blade cooling water reservoir to keep blade cool while minimizing dust and debris. Bevel cuts tile from 0 to 45 degrees. Corrosive resistent stainless steel top supports tiles up to 12 x 12-in. Adjustable rip fence with miter gauge for accurate straight and miter cuts.