16 Top Laminate Trims for 2020

 

Amana Tool - 51432 Solid Carbide Invectra Aluminum Laminate Trim 14 Dia x 58 x 12

Amana Tool – 51432 Solid Carbide Invectra Aluminum Laminate Trim 1/4 Dia x 5/8 x 1/2″

Amana Tool – 51432 Solid Carbide Invectra Aluminum Laminate Trim 1/4 Dia x 5/8 x 1/2″ - With invectra router bits, kitchen fabricators, remodelers and construction workers can perform any kind of cut and trim job in aluminum laminates. Engineered from an amana tool exclusive carbide grade designed specifically for cutting both aluminum laminates and wood-based substrate materials. (Ati), decometal and many others. Designed and tested for trimming all decorative aluminum laminates manufactured by formica (except formica #2178), advanced technology inc. Each bit is fitted with a steel bearing guide that enables users to trim laminate materials flush to the substrate, allowing you to perform any metal trim job to perfection not for use on stainless steel. , #51432, diameter (d) 1/2, cutting height (b) 5/8, shank (d) 1/2, overall length (l) 3-d/4, replacement bearing 47701 (2), washer 67053, locking ring 47752, l1 5/32, flutes 2, 51432 solid carbide invectra aluminum laminate trim 1/4 dia x 5/8 x 1/2 inch shank.

 

Bosch 2608628352 Chamfer-Laminate Trim Bit 35x15x8mm

Bosch 2608628352 Chamfer-/Laminate Trim Bit 35x15x8mm

Bosch 2608628352 Chamfer-/Laminate Trim Bit 35x15x8mm - For over 125 years the name “bosch” has been associated with forward-looking technology and trailblazing inventions that have made history. Bosch does business all over the world and is active in the most wide-ranging sectors. Here you can find out more about our business sectors and divisions in germany.

 

Century Drill and Tool 40443 Bevel Laminate Trim TCT Carbide Router Bit 7 Degree

Century Drill and Tool 40443 Bevel Laminate Trim TCT Carbide Router Bit, 7 Degree

Century Drill and Tool 40443 Bevel Laminate Trim TCT Carbide Router Bit, 7 Degree - Premium micro-grain carbide tips provide a stronger sharper cutting edge reducing wear for a longer tool life. Solid carbide bit for smooth bevel cuts. 1/4-inch diameter 7 degree and 1/4-inch shank. Anti-kickback design for maximum safety during initial starting cuts. Heat treated fully hardened bodies prevent breakage or bending under stress.

 

OKSLO Amana Tool 47105 Dynabit Laminate Trim 12-Inch Diameter by 1-Inch Cutting Heigh

OKSLO Amana Tool 47105 Dynabit Laminate Trim 1/2-Inch Diameter by 1-Inch Cutting Heigh

OKSLO Amana Tool 47105 Dynabit Laminate Trim 1/2-Inch Diameter by 1-Inch Cutting Heigh - Etchings finish. Flint crystall. Made in usa. Our bevel trim is miter folded from 1 pc of laminate so patterns flow through from the face to edge.

 

Woodtek 820662 Router Bits Flush Laminate Trimming bottom Bearing 3 Flute Laminate Trim Bit 12 Shank

Woodtek 820662, Router Bits, Flush & Laminate Trimming, (bottom Bearing), 3 Flute Laminate Trim Bit, 1/2″ Shank

Woodtek 820662, Router Bits, Flush & Laminate Trimming, (bottom Bearing), 3 Flute Laminate Trim Bit, 1/2″ Shank - Cnc-machining to +/-0. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Imported. Rugged ptfe (polytetrafluoroethylene) briteview™ bright yellow coating not only protects but provides better visibility for safer operations. Manufactured in facilities meeting stringent iso 90012008 quality assurance standards. 1/4″ and 1/2″ shanks. Ideal for laminate work. Woodtek carbide-tipped three flute flush cut router trimmer bits help ensure chip-free laminate and other trimming, use with hand-held portable routers and laminate trimmers micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. Positive shear angle places less demand upon your routing equipment.

 

Amana Tool - RC-1008 Insert Bevel Laminate Trim 15 Deg x 1316 Dia x 716 x 14 Shank

Amana Tool – RC-1008 Insert Bevel Laminate Trim 15 Deg x 13/16 Dia x 7/16 x 1/4″ Shank

Amana Tool – RC-1008 Insert Bevel Laminate Trim 15 Deg x 13/16 Dia x 7/16 x 1/4″ Shank - All bevel trim bits have four cutting edges per knife. #Rc-1008, diameter (d) 13/16, angle (a°) 15°, cutting height (b) 7/16, shank (d) 1/4, overall length (l) 2-1/4, replacement bearing 47712, replacement knives ama-12, flutes 2, rc-1008 insert bevel laminate trim 15 deg x 13/16 dia x 7/16 x 1/4 inch shank.

 

Amana Tool - 47302 Carbide Tipped Bevel Laminate Trim 7 Deg x 34 Dia x 716 x 14 Sh

Amana Tool – 47302 Carbide Tipped Bevel Laminate Trim 7 Deg x 3/4 Dia x 7/16 x 1/4″ Sh

Amana Tool – 47302 Carbide Tipped Bevel Laminate Trim 7 Deg x 3/4 Dia x 7/16 x 1/4″ Sh - , #47302, diameter (d) 3/4, angle (a°) 7°, cutting height (b) 7/16, shank (d) 1/4, overall length (l) 2, replacement bearing 47716, flutes 3, d1 16mm, 47302 carbide tipped bevel laminate trim 7 deg x 3/4 dia x 7/16 x 1/4 inch shank with ball bearing 3-flute. Intended for use in a standard router. The solid construction of this carbide-tipped bit reduces vibration, and its three-flute configuration produces a very smooth cut.

 

Amana Tool - RC-1010 Insert Bevel Laminate Trim 25 Deg x 3132 Dia x 716 x 14 Inch Shank

Amana Tool – RC-1010 Insert Bevel Laminate Trim 25 Deg x 31/32 Dia x 7/16 x 1/4 Inch Shank

Amana Tool – RC-1010 Insert Bevel Laminate Trim 25 Deg x 31/32 Dia x 7/16 x 1/4 Inch Shank - All bevel trim bits have four cutting edges per knife. #rc-1010, diameter (d) 31/32, angle (a°) 25°, cutting height (b) 7/16, shank (d) 1/4, overall length (l) 2-1/4, replacement bearing 47712, replacement knives ama-12, flutes 2, rc-1010 insert bevel laminate trim 25 deg x 31/32 dia x 7/16 x 1/4 inch shank.

 

IVY Classic 10824 22-Degree Bevel Laminate Trim Carbide Router Bit with Ball Bearing 14-Inch Shank 1Pouch

IVY Classic 10824 22-Degree Bevel Laminate Trim Carbide Router Bit with Ball Bearing, 1/4-Inch Shank, 1/Pouch

IVY Classic 10824 22-Degree Bevel Laminate Trim Carbide Router Bit with Ball Bearing, 1/4-Inch Shank, 1/Pouch - Anti-kickback design ensures constant chip removal and 1/4-inch alloy-steel shank is tempered for strength. Shielded ball bearing guide prevents burning and marring (replacement ball bearing ivy classic 10964). Double fluted, c2 modified carbide ensures longest life and highest quality, diamond-honed for true cutting. Width of cut (w) 7/8-inch, cutting depth (d) 15/32-inch, overall length (l) 2-1/4-inch, bevel 22-degrees, sturdy reusable pouch. Ideal for trimming and beveling laminates, veneers, hard wood and soft wood.

 

Amana Tool - 47148 Carbide Tipped Laminate Trimmer with Euro Square Bearing 34 Dia x 58

Amana Tool – 47148 Carbide Tipped Laminate Trimmer with Euro Square Bearing 3/4 Dia x 5/8

Amana Tool – 47148 Carbide Tipped Laminate Trimmer with Euro Square Bearing 3/4 Dia x 5/8 - The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut. The square bearing is manufactured with a strong non-stick teflon which won’t mark your edge so it can be wiped clean easily, #47148, diameter (d) 3/4, cutting height (b) 5/8, shank (d) 1/4, overall length (l) 2-3/8, replacement bearing sqb102, flutes 2, 47148 carbide tipped laminate trimmer with euro square bearing 3/4 dia x 5/8 x 1/4 inch shank router bit. Amana tool industrial quality carbide tipped laminate trim bits with the euro square bearings.

 

Amana Tool - 51430 Solid Carbide Invectra Aluminum Laminate Trim 14 Dia x 58 x 14

Amana Tool – 51430 Solid Carbide Invectra Aluminum Laminate Trim 1/4 Dia x 5/8 x 1/4″

Amana Tool – 51430 Solid Carbide Invectra Aluminum Laminate Trim 1/4 Dia x 5/8 x 1/4″ - Each bit is fitted with a steel bearing guide that enables users to trim laminate materials flush to the substrate, allowing you to perform any metal trim job to perfection, not for use on stainless steel. Engineered from an amana tool exclusive carbide grade designed specifically for cutting both aluminum laminates and wood-based substrate materials. With invectra router bits, kitchen fabricators, remodelers and construction workers can perform any kind of cut and trim job in aluminum laminates. , #51430, diameter (d) 1/4, cutting height (b) 5/8, shank (d) 1/4, overall length (l) 2-3/8, replacement bearing 47723 (2pcs), screw # 67134, flutes 2, 51430 solid carbide invectra aluminum laminate trim 1/4 dia x 5/8 x 1/4 inch shank. (Ati), decometal and many others. Designed and tested for trimming all decorative aluminum laminates manufactured by formica (except formica #2178), advanced technology inc.

 

Whiteside Router Bits 2801 Combination Flush or Bevel Laminate Trim Bit with 716-Inch Cutting Diameter and 22-12-Degree Angle

Whiteside Router Bits 2801 Combination Flush or Bevel Laminate Trim Bit with 7/16-Inch Cutting Diameter and 22-1/2-Degree Angle

Whiteside Router Bits 2801 Combination Flush or Bevel Laminate Trim Bit with 7/16-Inch Cutting Diameter and 22-1/2-Degree Angle - Whiteside machine company. Today, whiteside machine occupies a 40,000 sq. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Ft. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling.

 

IVY Classic 10818 12 x 58-Inch Laminate Trim Carbide Router Bit with Ball Bearing Guide 14-Inch Shank 1Pouch

IVY Classic 10818 1/2 x 5/8-Inch Laminate Trim Carbide Router Bit with Ball Bearing Guide, 1/4-Inch Shank, 1/Pouch

IVY Classic 10818 1/2 x 5/8-Inch Laminate Trim Carbide Router Bit with Ball Bearing Guide, 1/4-Inch Shank, 1/Pouch - Double fluted, c2 modified carbide ensures longest life and highest quality, diamond-honed for true cutting. Ideal for trimming laminates, veneers, hard wood and soft wood. Shielded ball bearing guide prevents burning and marring (replacement ball bearing ivy classic 10964). Width of cut (w) 1/2-inch, cutting depth (d) 5/8-inch, overall length (l) 1-7/8-inch, sturdy reusable pouch. Anti-kickback design ensures constant chip removal and 1/4-inch alloy-steel shank is tempered for strength.

 

Bevel Edge Laminate Countertop Trim Flint Crystall

Bevel Edge Laminate Countertop Trim: Flint Crystall

Bevel Edge Laminate Countertop Trim: Flint Crystall - Over 650 popular patterns and finishes. Cut-off will be included in shipment. High quality beveled edging provides a beautiful finishing touch for any laminate countertop design. Bevel edge countertop trim and countertop edging to match wilsonart and formica brand laminate.

 

Freud 116 Radius Laminate Trim Bit with 14 Shank 41-502

Freud 1/16″ Radius Laminate Trim Bit with 1/4″ Shank (41-502)

Freud 1/16″ Radius Laminate Trim Bit with 1/4″ Shank (41-502) - Use on hand-held routers, table-mounted portable routers, and laminate trimmers for trimming plastic laminate. Ideal for countertop-grade laminates including formica, wilsonart and similar materials. Ideal for countertop-grade laminates including formica, wilsonart and similar materials. The 41-502 unique cutting geometry produces an ultra-smooth finish on laminate edges. The 41-502 unique cutting geometry produces an ultra-smooth finish on laminate edges. Use on hand-held routers, table-mounted portable routers, and laminate trimmers for trimming plastic laminate.

 

Ridgid R2401 Laminate Trim Router Renewed

Ridgid R2401 Laminate Trim Router (Renewed)

Ridgid R2401 Laminate Trim Router (Renewed) - Round and square bases, for added versatility and convenience. Easy access micro adjust dial, for precise depth control. Flat top, router sits upside down for easier bit changes. No mar top, overmold on top of router prevents marring of work surface. Quick release lever, allows for easy removal of motor from base.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.