15 Top Socket 8s

 

OTC 1925 Locknut Socket - 8 point 3-34 Opening Size

OTC (1925) Locknut Socket – 8 point, 3-3/4″ Opening Size

OTC (1925) Locknut Socket – 8 point, 3-3/4″ Opening Size - Socket is designed for use with 3/4 inch square-drive manual tools only impact tool use voids socket warranty. Made of high-strength steel. Resists rounding out. Specially designed and makes wheel bearing locknuts easy to remove or install. Opening size is 8 point and 3-3/4 inches.

 

GearWrench 80446 38-Inch Drive Long Ball Hex Bit Socket 8mm

GearWrench 80446 3/8-Inch Drive Long Ball Hex Bit Socket 8mm

GearWrench 80446 3/8-Inch Drive Long Ball Hex Bit Socket 8mm - Heat treated socket bases for durability and serviceability. Chrome sockets. Ball-end allows for using at angle off-axis to the fastener. Ball and hex shaft have black oxide finish and made of high quality tool steel. Patented bit holding internal dimple retention feature force bit surface to the opposite side for maximum retention.

 

Stanley Proto  J5418S 12-Inch Drive Socket 916-Inch 8 Point

Stanley Proto J5418S 1/2-Inch Drive Socket, 9/16-Inch, 8 Point

Stanley Proto J5418S 1/2-Inch Drive Socket, 9/16-Inch, 8 Point - Stanley j5418s proto 1/2-inch drive socket 9/16-inch, 8 point for square nuts 1/2-inch drive sockets, 8 point 9/16-inch size. .

 

OTC 9851 18 8-Point Wheel Bearing Locknut Socket with Tool Board

OTC 9851 18″ 8-Point Wheel Bearing Locknut Socket with Tool Board

OTC 9851 18″ 8-Point Wheel Bearing Locknut Socket with Tool Board - Measure from flat to flat to determine size of locknut then consult chart to find the correct socket. Wheel bearing locknuts are easy to remove or install with these specially designed sockets. They’re made of high strength steel and resist rounding out. Kit includes the following 8 pt the sockets 2-9/16 inch 3 inch 3-1/4 inch 3-1/ 2 inch 3-7/8 inch 4-3/8 inch 4-7/8 inch 3-3/8 inch 3-3/4 inch 3-13/16 inch 2-5/8 inch 2-7/8 inch 3-5/8 inch 2-7/8 inch 3-1/8 inch 2-3/4 inch and 4-1/ 2 inch. Sockets are designed for use with 3/4 inch square-drive manual tools only.

 

MINTCRAFT MT6487806 1 1 1 Deep Socket 8mm 14 Drive 6-Point

MINTCRAFT MT6487806 1 1 1 Deep Socket 8mm 1/4 Drive, 6-Point

MINTCRAFT MT6487806 1 1 1 Deep Socket 8mm 1/4 Drive, 6-Point - Drop forged construction for a longer lifespan. Composed of hardened, refurbished chrome vanadium steel. Easily and securely locks onto ratchet.

 

Williams BD-812  38 Drive Shallow Socket 8- Point 38-Inch

Williams BD-812 3/8 Drive Shallow Socket, 8- Point, 3/8-Inch

Williams BD-812 3/8 Drive Shallow Socket, 8- Point, 3/8-Inch - It has supertorque lobular openings for greater turning power. It is without deforming the fastener. 8 point sockets are designed for quick engagement on 4 point fasteners.

 

Stanley Proto J5208M 38-Inch Drive Socket 8mm 12 Point

Stanley Proto J5208M 3/8-Inch Drive Socket, 8mm, 12 Point

Stanley Proto J5208M 3/8-Inch Drive Socket, 8mm, 12 Point - Proto 12 point sockets are ideal for use on stubborn or damaged fasteners and also on fasteners made from soft materials. The torque plus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners. The torque plus internal design minimizes fastener rounding, helps to extend fastener life. The torque plus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats.

 

OEMTOOLS  708M 38 Drive Impact Socket - 8 mm

OEMTOOLS 708M 3/8 Drive Impact Socket – 8 mm

OEMTOOLS 708M 3/8 Drive Impact Socket – 8 mm - . The sockets have a posi-grip no-slip that provides off corner loading for greater torque and the chamfered ends allow the socket to easily slip over the bolt head. The oemtools 3/8 drive impact socket, 8 mm is made with heat treated, black oxide finish.

 

Stanley 16-793 Sweetheart 750 Series Socket Chisel 8 Piece Set

Stanley 16-793 Sweetheart 750 Series Socket Chisel 8 Piece Set

Stanley 16-793 Sweetheart 750 Series Socket Chisel 8 Piece Set - Dimensions (l x w x h) 13. Their side bevels are extra narrow for working in tight corners. It also provides a wide butt end, or large sweet spot, for striking accuracy. 8 x 9. Set includes the following sizes 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1, and 1-1/4 chisels and a leather pouch. Machined from high carbon steel, the sweetheart chisels sharpen easily and retain a razor-sharp edge over long periods of use. Designed for striking and paring, the hornbeam handle provides a comfortable feel that transfers energy effectively when struck by a mallet. 3 x 3. The stanley 16-793 sweetheart 750 series socket chisel 8 piece set is a part of the sweetheart line socket chisels that are based on the classic 750 design, which is arguably the best stanley chisel ever made. This helps the user to avoid inadvertent marring of the work when precise cuts are critical. 1 made in great britain.

 

Williams ST-818  916-Inch Shallow 8 Point Socket

Williams ST-818 9/16-Inch Shallow 8 Point Socket

Williams ST-818 9/16-Inch Shallow 8 Point Socket - It has a high polished chrome finish. The super torque lobular openings for greater turning power without deforming the fastener. The snap-on jh williams st-818 9/16-inch shallow 8 point socket has an overall length of 1 1/2-inches and a 1/2-inch drive. The 8 point sockets are designed for quick engagement on 4 point fasteners.

 

Williams ST-820 12 Drive Shallow Socket 8- Point 58-Inch

Williams ST-820 1/2 Drive Shallow Socket, 8- Point, 5/8-Inch

Williams ST-820 1/2 Drive Shallow Socket, 8- Point, 5/8-Inch - Sockets feature supertorque lobular openings for greater turning power without deforming the fastener. It is of durable quality and highly efficient. All tools are professional quality, made of high-grade chrome vanadium steel.

 

Stanley Proto  J5432S 12-Inch Drive Socket 1-Inch 8 Point

Stanley Proto J5432S 1/2-Inch Drive Socket, 1-Inch, 8 Point

Stanley Proto J5432S 1/2-Inch Drive Socket, 1-Inch, 8 Point - . Stanley j5432s proto 1/2-inch drive socket 1-inch, 8 point for square nuts 1/2-inch drive sockets, 8 point 1-inch size.

 

SK Hand Tool 31068 6 Point 14-Inch Drive Deep Impact Socket 8mm

SK Hand Tool 31068 6 Point 1/4-Inch Drive Deep Impact Socket, 8mm

SK Hand Tool 31068 6 Point 1/4-Inch Drive Deep Impact Socket, 8mm - Laser engraved with 3 extra large markings every 120 degrees around the sockets for improved readability. S. A. Made in the u. Coated with a rust-preventative compound that makes them exceptionally resistant to corrosive factors. , Featuring the suregrip hex design, which drives the side of the hex, not the corner. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength and avoid rounding of rusted or damaged fasteners.

 

Sunex 3329 38-Inch Drive Standard and Deep Metric Master Impact Socket Set 29-Piece

Sunex 3329 3/8-Inch Drive Standard and Deep Metric Master Impact Socket Set, 29-Piece

Sunex 3329 3/8-Inch Drive Standard and Deep Metric Master Impact Socket Set, 29-Piece - Includes a heavy duty blow molded storage case. Set contains the following sizes 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm and 22mm standard sockets 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm and 22mm deep sockets and a universal joint. It is made of cr-mo alloy steel for long life and fully guaranteed. This sunex 3/8 inch drive 29 piece metric master impact socket set includes the most common sizes used for automotive repair.

 

Williams BD-810  38 Drive Shallow Socket 8- Point 516-Inch

Williams BD-810 3/8 Drive Shallow Socket, 8- Point, 5/16-Inch

Williams BD-810 3/8 Drive Shallow Socket, 8- Point, 5/16-Inch - 8 point sockets are designed for quick engagement on 4 point fasteners. It is without deforming the fastener. It has supertorque lobular openings for greater turning power.