15 Greatest Carbide Balls

 

Niagara Cutter N55466 Carbide Ball Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 2 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N55466 Carbide Ball Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 2″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N55466 Carbide Ball Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 2″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Ball nose end mills (also called ball end) create contoured surfaces. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Uncoated (bright) tools have no additional surface treatment or coating for general-purpose applications.

 

Niagara Cutter N59902 Carbide Ball Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 15 Overall Length 0063 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N59902 Carbide Ball Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5″ Overall Length, 0.063″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N59902 Carbide Ball Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5″ Overall Length, 0.063″ Cutting Diameter, 0.125″ Shank Diameter - Four flutes produce a better finish than fewer flutes. Uncoated (bright) tools have no additional surface treatment or coating to retain miniature end mill’s tight tolerances. Ball nose end (also called ball end) creates contoured surfaces. Miniature end mills create the intricate cuts needed for precision industries. Carbide can run at higher speeds than high-speed or cobalt steel, offering increased wear resistance and high cutting temperatures.

 

Niagara Cutter N56026 Carbide Ball Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 2 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N56026 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N56026 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin and ticn coatings. Ball nose end mills (also called ball end) create contoured surfaces. Four flutes produce a better finish than fewer flutes. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.

 

Niagara Cutter N59771 Carbide Ball Nose End Mill Stub Length Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 15 Overall Length 0031 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N59771 Carbide Ball Nose End Mill, Stub Length, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.031″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N59771 Carbide Ball Nose End Mill, Stub Length, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.031″ Cutting Diameter, 0.125″ Shank Diameter - Carbide can run at higher speeds than high-speed or cobalt steel, offering increased wear resistance and high cutting temperatures. Stub length increases the strength of the cutting edge, making it less likely to break in the workpiece. Miniature end mills create the intricate cuts needed for precision industries. Ball nose end (also called ball end) creates contoured surfaces. Two flutes offer better chip-carrying capacity than end mills with more flutes.

 

YG-1 E5062 Carbide Ball Nose End Mill Extra Long Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 6 Overall Length 025 Cutting Diameter 025 Shank Diameter

YG-1 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Ball nose end mills (also called ball end) create contoured surfaces­­­. Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Four flutes produce a better finish than fewer flutes.

 

18 Flute Carbide CNC Router Bits Ball Nose End Mills 22mm Tools Pack of 10

1/8″ Flute Carbide CNC Router Bits Ball Nose End Mills 22mm Tools Pack of 10

1/8″ Flute Carbide CNC Router Bits Ball Nose End Mills 22mm Tools Pack of 10 - Come to move slowly and accelerate gradually, but the move should not be too fast. 175mm (1/8″) shank diameter 3. Specification material carbide number of flutes 2 flute cutting diameter 3. High cost-effective, improve efficiency. Using tips lower the cutter grasper as far as possble. If the chuck works with vibration, reduce the feeding speed to check if there is something wrong with chuck or fixture. . Mainly used in cutting and engraving. Package includes 10 x ball nose end mills. 175mm (1/8″) cutting edge length (flute length) 22mm total length 38mm quantity 1 box /10pcs features high-density polished, wear-resistant, high temperature. Note please allow a bit hand measuring errors of 0-2mm. Can be engraved copper, aluminum ,abs, acrylic, pvc, nylon, resin, most plastics ect.

 

Melin Tool CCMGS-B Carbide Ball Nose End Mill AlTiN Monolayer Finish 30 Deg Helix 4 Flutes 2 Overall Length 02500 Cutting Diameter 025 Shank Diameter by Melin Tool

Melin Tool CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 2 Overall Length, 0.2500 Cutting Diameter, 0.25 Shank Diameter by Melin Tool

Melin Tool CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 2 Overall Length, 0.2500 Cutting Diameter, 0.25 Shank Diameter by Melin Tool - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systemsaluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothnessround shanks allow use with a wide variety of toolholding systemsuse for radius and contouring part surfacesdesigned to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous.

 

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set 4 Flute 18 to 12 Pack of 6

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8″ to 1/2″ (Pack of 6)

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8″ to 1/2″ (Pack of 6) - Stub length end mills for extra rigidity. 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide. Contains 1pc of each diameter 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2. Contains kodiak cutting tools brand premium quality usa made ball nose solid carbide end mills. Fitted wood block stand included and each size comes in a marked plastic tube.

 

Kodiak Cutting Tools KCT133637 USA Made  Ball Nose Premium Carbide End Mill AlTiN Coated 4 Flute 18 Shank 14 Length of Cut 1-12 Overall Length 18 Diameter

Kodiak Cutting Tools KCT133637 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/8″ Diameter

Kodiak Cutting Tools KCT133637 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/8″ Diameter - This coating is extremely heat resistant and can be used with or without coolant. 0001″/-. 1/8 inch diameter solid carbide end mill, coated 1/8″ shank 1/4″ length of cut 1-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. 002″shank diameter tolerance -. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. 000″/-. It is exceptional in difficult to machine materials where adhesive wear is particularly high.

 

10mm 4mm CEL 2 Flute Carbide Ball Nose End Mills Router Bit

1.0mm 4mm CEL 2 Flute Carbide Ball Nose End Mills Router Bit.

1.0mm 4mm CEL 2 Flute Carbide Ball Nose End Mills Router Bit. - Suitable for machining steel, hardened steel, steel alloys, stainless steel, cast iron, copper, brass, bronze, aluminum, and aluminum alloys. Long length end mills have longer cutting edges and can make deeper cuts than standard length end mills. Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. 10mm 4mm cel 2 flute carbide ball nose end mills router bit.

 

Niagara Cutter N55620 Carbide Ball Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 3 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N55620 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 3″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N55620 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 3″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Ball nose end mills (also called ball end) create contoured surfaces. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin and ticn coatings.

 

Melin Tool CCMGS-B Carbide Ball Nose End Mill AlTiN Monolayer Finish 30 Deg Helix 4 Flutes 25000 Overall Length 05000 Cutting Diameter 05 Shank Diameter

Melin Tool CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 2.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5″ Shank Diameter

Melin Tool CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 2.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Use for radius and contouring part surfaces. Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Round shanks allow use with a wide variety of toolholding systems.

 

Kodiak Cutting Tools KCT133219 USA Made  Solid Premium Carbide Ball Nose End Mill AlTiN Coated 4 Flute 18 Shank 14 Length of Cut 1-12 Overall Length 116

Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/16″

Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/16″ - 1/16 inch diameter solid carbide end mill, coated 1/8″ shank 1/4″ length of cut 1-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. 000″/-. It is exceptional in difficult to machine materials where adhesive wear is particularly high. 002″shank diameter tolerance -. This coating is extremely heat resistant and can be used with or without coolant. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. 0001″/-.

 

BQLZR 113 2mm 2 Flutes Carbide Ball Nose End Mills CNC Bits 12mm Flute Length Pack of 5

BQLZR 1/13″ 2mm 2 Flutes Carbide Ball Nose End Mills CNC Bits 12mm Flute Length Pack of 5

BQLZR 1/13″ 2mm 2 Flutes Carbide Ball Nose End Mills CNC Bits 12mm Flute Length Pack of 5 - The item is only use for industrial cutting/engraving, not hazardous article package include 5 x ball nose end mills. The bladed product is not use for people under 18 years. Note the color of the item may vary slightly due to photography and your own computer specification wear-resistant and with special ball nose end design material solid carbide cutting diameter 2mm (1/13″) shank diameter 3. 175mm (1/8″) cutting edge length (flute length) 12mm total length 38mm number of flutes 2 a wide range of materials can be engraved, including copper, aluminum ,abs, acrylic, pvc, nylon, resin, majority of plastics weight 24g safety instructions 1. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed£® 2. 3.

 

Autek 5x 18 Titanium Coated 2 Two Flute Carbide Ball Nose End Mills CNC Bit Router 22mm 2Qx322Tix5

Autek 5x 1/8″ Titanium Coated 2 Two Flute Carbide Ball Nose End Mills CNC Bit Router 22mm (2Qx3.22Tix5)

Autek 5x 1/8″ Titanium Coated 2 Two Flute Carbide Ball Nose End Mills CNC Bit Router 22mm (2Qx3.22Tix5) - Range of processing pcb, smt, the cnc, mold, plastic, copper, stainless steel and other precision metal parts processing. Coated with titanium:improve the speed and feed rate of the tool ,improve the surface wear resistance. “product name two flute ball nose bit (carbide plating titanium bit) carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life. Material blade carbide (tungsten steel).