13 Most Wanted Taper Shank Drills

 

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit Black Oxide 2 Morse Taper Shank 135 Degree Split Point 78 Dia x 10 Lg Pack of 1

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #2 Morse Taper Shank, 135 Degree Split Point, 7/8″ Dia. x 10″ Lg (Pack of 1)

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #2 Morse Taper Shank, 135 Degree Split Point, 7/8″ Dia. x 10″ Lg (Pack of 1) - Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. With 135 degree drill point, allowing for a cleaner drill hole and less slippage when starting. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. With 30 degree helix.

 

Cleveland 2410 High Speed Steel Taper Shank Drill Bit Black Oxide 3 Morse Taper Shank 135 Degree Split Point 1 Dia x 11 Lg Pack of 1

Cleveland 2410 High Speed Steel Taper Shank Drill Bit, Black Oxide, #3 Morse Taper Shank, 135 Degree Split Point, 1″ Dia. x 11″ Lg (Pack of 1)

Cleveland 2410 High Speed Steel Taper Shank Drill Bit, Black Oxide, #3 Morse Taper Shank, 135 Degree Split Point, 1″ Dia. x 11″ Lg (Pack of 1) - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. With 30 degree helix. With 135 degree drill point, allowing for a cleaner drill hole and less slippage when starting. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish 2 Morse Taper Shank 135 Degree Notch Point 58 Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size - 135 degree notch point reduces thrust forces and easier penetration. Straw finish standard from stock and alternate coatings are available as stock modifications. Manufactured from premium 8% cobalt (m42) high-speed steel for increasing hot hardness. Furnished with american national standard (morse) taper shanks. Heavy-duty geometry for drilling in tough, high-tensile materials under extreme operating conditions.

 

Precision Twist S209 High Speed Steel Taper Shank Drill Bit Black Oxide Finish Morse Taper Shank Spiral Flute 118 Degree Point Angle 1 732

Precision Twist S209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1 7/32″

Precision Twist S209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1 7/32″ - 118-degree conventional point angles good for general drilling applications. High-speed steel, for use on a wide variety of materials. Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits. Morse taper shank, secure and accurate tool-holding system. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off.

 

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish Morse Taper Shank Spiral Flute 135 Degree Point Angle 2332

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″ - Morse taper shank, for a secure and accurate tool-holding system. Gold oxide to retain cutting fluid and prevent chip to tool welding. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Long length drill bits (also called taper length) have longer flutes and overall lengths than jobber drill bits. 135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges.

 

Kodiak Cutting Tools KCT115773 USA Made  Taper Shank Drill Bits 1 Diameter

Kodiak Cutting Tools KCT115773 USA Made Taper Shank Drill Bits, 1″ Diameter

Kodiak Cutting Tools KCT115773 USA Made Taper Shank Drill Bits, 1″ Diameter - 6-3/8 length of cut. Made in the usa. No3 morse taper. 11 overall length. 2 flutes.

 

Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit Black Oxide Finish 3 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1-116 Size Pack of 1

Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16″ Size (Pack of 1)

Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16″ Size (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. Designed to perform in a broad range of materials in the iron and steel families.

 

Drill America DEWA0303 Qualtech Drill Chuck Arbor 3 Morse Taper Shank To 3 Jacobs Taper Pack of 1

Drill America DEWA0303 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #3 Jacobs Taper (Pack of 1)

Drill America DEWA0303 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #3 Jacobs Taper (Pack of 1) - #3 morse taper shank to #3 jacobs taper. Drill america qualtech drill chuck arbor. .

 

Dormer A13032 Taper Shank Drill Jobber Steam Oxide Coating High Speed Steel Head Diameter 32 mm Flute Length 36 mm

Dormer A1303.2 Taper Shank Drill Jobber, Steam Oxide Coating, High Speed Steel, Head Diameter 3.2 mm, Flute Length 36 mm

Dormer A1303.2 Taper Shank Drill Jobber, Steam Oxide Coating, High Speed Steel, Head Diameter 3.2 mm, Flute Length 36 mm - It is 118° drill point angle with din 345 drill standard. Steam oxide coating surface treatment for increased wear resistance & lubricity. Steam oxide reduces wear and chip. Low thrust design self centering split point for easier penetration.

 

Dormer A130118 Taper Shank Drill Jobber Steam Oxide Coating High Speed Steel Head Diameter 118 mm Flute Length 94 mm

Dormer A13011.8 Taper Shank Drill Jobber, Steam Oxide Coating, High Speed Steel, Head Diameter 11.8 mm, Flute Length 94 mm

Dormer A13011.8 Taper Shank Drill Jobber, Steam Oxide Coating, High Speed Steel, Head Diameter 11.8 mm, Flute Length 94 mm - Low thrust design self centering split point for easier penetration. Steam oxide reduces wear and chip. It is 118° drill point angle with din 345 drill standard. Steam oxide coating surface treatment for increased wear resistance & lubricity. .

 

ZFE 145mm Hss MT2 Morse Taper Shank Drill Bit

ZFE 14.5mm Hss MT2 Morse Taper Shank Drill Bit

ZFE 14.5mm Hss MT2 Morse Taper Shank Drill Bit - 145mm hss mt2 morse taper. 145mm hss mt2 morse taper shank drill bit. Shank drill bit,mt2 morse taper shank. More details please see the description. Above all for your reference welcome to buy.

 

Precision Twist 209 High Speed Steel Taper Shank Drill Bit Black Oxide Finish Morse Taper Shank Spiral Flute 118 Degree Point Angle 1

Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1″

Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1″ - Morse taper shank, for a secure and accurate tool-holding system. 118-degree conventional point angles for general drilling applications. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off. Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits. High-speed steel (hss), for use on a wide variety of materials.

 

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit Armor Piercing Gold Oxide Finish Morse Taper Shank 130 Degree Conventional Point 58 Pack of 1

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit, Armor Piercing, Gold Oxide Finish, Morse Taper Shank, 130 Degree Conventional Point, 5/8″ (Pack of 1)

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit, Armor Piercing, Gold Oxide Finish, Morse Taper Shank, 130 Degree Conventional Point, 5/8″ (Pack of 1) - Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. With 15 degree helix. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.